Everyone knows the E53 has been notorious for the air ride system to fail. Even BMW technicians will tell you it's not if your air bags will fail, its when. Repairs can become fairly costly as well, with each bag plus labor potential costing you hundreds and hundreds of dollars. Not only that, but the repairs never seem to be permanent, whether its a sensor going off a leaky air bag or the compressor. Get rid of these problems for good, with this Coil Spring conversion kit. Using OEM springs will give you similar ride height as the air ride without compromising handling or comfort.

**Note: Installing this kit will trigger a Self-Leveling Suspension Inactive Light**

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: 0" (0mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2007-2013 E92 BMW 335i 335is 335xi - Coupe

BMW E90 Lowering Spring Kit is designed to enhance both the appearance and performance of your vehicle. This Megan Racing Lowering Spring Kit significantly improves your BMW's aesthetics and handling dynamics by lowering the center of gravity, resulting in reduced body roll during turns, minimized dive under braking, and decreased squat during acceleration.

• Improved Handling: Lowers the center of gravity to reduce body roll, brake dive, and acceleration squat.
• Enhanced Aesthetics: Minimizes fender gap, giving your BMW a sleek and aggressive stance.
• Durable Construction: Made from high-quality SAE 9254 cold-wound steel for long-lasting performance.
• Precision Fit: Engineered specifically for the BMW E90, ensuring accurate spring rates and compatibility.
• Optimal Performance: While compatible with stock shocks, aftermarket shocks are recommended for the best results.

Upgrade your BMW E90 with this Lowering Spring Kit from Turner Motorsport to achieve superior handling and a more aggressive look.

Elevate the performance of your BMW with Turner Motorsport Performance Springs, designed to reduce body roll and enhance handling. These springs feature increased spring rates for improved grip and a slight lowering to lower the vehicle's center of gravity without sacrificing street usability or comfort. Experience reduced dive under braking and squat under acceleration for a more controlled driving experience. Here are the key benefits:

• Reduced body roll for tighter handling
• Decreased dive under braking
• Enhanced grip for improved performance
• 1/2" front lowering without compromising rear comfort
• Preset to prevent spring sag
• Shot-peened for stress relief and durability
• Worth 2 points toward your Dinan badge

For over 35 years, Turner Motorsport has been at the forefront of BMW tuning, offering meticulously developed and tested parts that preserve the original driving feel while enhancing performance. Backed by a four-year, 50,000-mile warranty, Turner Motorsport ensures quality and reliability in every product.

The Stage 1 Suspension System system consists of a set of performance tuned springs and carefully matched Koni adjustable front strut assemblies and rear shocks. The system provides superior handling through increased grip and reduction of body roll while maintaining a nicely dampened ride. The modestly lower ride height gives the car a tastefully enhanced performance look as well as improving suspension geometry. 

This item fits the following BMWs: 
1996-1999 E36 BMW M3 Sedan and Coupe

Coil Spring Pad E46 E39 E6X by Hamburg Tech

Enhance your BMW's suspension system with the Coil Spring Pad E46 E39 E6X by Hamburg Tech. Designed for various BMW models including the E46, E39, and E6X series, these coil spring pads offer improved cushioning and support for your vehicle's coil springs. Crafted with precision engineering, they ensure proper alignment and reduce noise and vibration during driving. Made from high-quality materials, these coil spring pads are durable and long-lasting, providing enhanced performance and comfort for your BMW.

• Compatible with BMW E46, E39, and E6X series models
• Improves cushioning and support for coil springs
• Ensures proper alignment for optimal performance
• Reduces noise and vibration during driving
• High-quality materials for durability and longevity

Upgrade your BMW's front-end performance with the Genuine BMW Upper Spring Pad. This crucial component serves as a bushing, fostering a seamless connection between the spring and spring plate. Over time, worn pads can lead to disruptive front-end noise. Invest in this Genuine BMW part to restore your vehicle's optimal functionality and eliminate disturbances in your ride quality.

• Genuine BMW part ensures precise fit and compatibility.
• Acts as a crucial bushing for the spring and spring plate.
• Prevents front-end noise caused by worn pads.
• Restores optimal performance and ride quality.

ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.

Why Choose ECS Lowering Springs?

Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications

Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!

ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.

Why Upgrade to ECS Rear Trailing Arms?

Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes

Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs