Sport / Lowering Springs

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -3/4" (19mm)
  
• R: -3/4" (19mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2010-2013 E70 BMW X5M
2009-2013 E71 BMW X6M

The perfect answer for cars equipped with electronic shocks: H&R VTF Adjustable Lowering Springs! More lowering, more features, and more personalization. Lower your vehicle with world-renowned H&R Sport Springs and have the advantage to fine-tune lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7” depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

F82 M4 - Lowering of 1 - 1.6" Front and .75 - 1.2" RearF82 M4 - Lowering of 1 - 1.6" Front and .75 - 1.2" Rear

BMW E92 M3 Performance Spring Set is engineered to elevate your driving experience by using increased spring rates that reduce body roll and enhance handling dynamics. This performance spring set lowers your vehicle's center of gravity slightly, providing a balanced stance without sacrificing daily driving comfort.

• Reduced Body Roll: Experience improved stability and control during cornering.
• Enhanced Braking Performance: Minimized dive under braking for more precise stops.
• Improved Grip: Better tire contact with the road for increased traction.
• Slight Lowering: Lowers the vehicle by approximately 1/2 inch for a sportier appearance.
• Durability: Springs are preset to prevent sag and are shot-peened for stress relief.
• Dinan Badge Points: Earn 2 points toward your exclusive Dinan badge.

For over 35 years, Dinan has led the way in BMW tuning, focusing on balanced performance that maintains the original driving feel of your BMW. Each part is meticulously developed, tested, and backed by a four-year, 50,000-mile warranty. As you enhance your BMW with Dinan's high-quality components, you move closer to earning the prestigious Dinan badge, a symbol of superior BMW performance.

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: 1/2" (12mm)
  
• R: 1/2" (12mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2007-2011 E90 BMW 335xi - Sedan

Z4 sDrive M40i:
Front Lowering: -1.0"
Rear Lowering -.8"

Z4 sDrive30i:
Front Lowering: -1.3"
Rear Lowering -1.0"

Enhance the look of your BMW G14 M850i xDrive with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

This item fits the following BMWs:
2019+ G29 BMW Z4 sDrive 30i M40i

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: -0.0" (0mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2007-2011 E90 BMW 335i - Sedan

The Stage 1 Suspension System system consists of a set of performance tuned springs and carefully matched Koni adjustable front strut assemblies and rear shocks. The system provides superior handling through increased grip and reduction of body roll while maintaining a nicely dampened ride. The modestly lower ride height gives the car a tastefully enhanced performance look as well as improving suspension geometry. 

This item fits the following BMWs: 
1996-1999 E36 BMW M3 Sedan and Coupe

BMW E90 Lowering Spring Kit is designed to enhance both the appearance and performance of your vehicle. This Megan Racing Lowering Spring Kit significantly improves your BMW's aesthetics and handling dynamics by lowering the center of gravity, resulting in reduced body roll during turns, minimized dive under braking, and decreased squat during acceleration.

• Improved Handling: Lowers the center of gravity to reduce body roll, brake dive, and acceleration squat.
• Enhanced Aesthetics: Minimizes fender gap, giving your BMW a sleek and aggressive stance.
• Durable Construction: Made from high-quality SAE 9254 cold-wound steel for long-lasting performance.
• Precision Fit: Engineered specifically for the BMW E90, ensuring accurate spring rates and compatibility.
• Optimal Performance: While compatible with stock shocks, aftermarket shocks are recommended for the best results.

Upgrade your BMW E90 with this Lowering Spring Kit from Turner Motorsport to achieve superior handling and a more aggressive look.

Elevate the performance of your BMW with Turner Motorsport Performance Springs, designed to reduce body roll and enhance handling. These springs feature increased spring rates for improved grip and a slight lowering to lower the vehicle's center of gravity without sacrificing street usability or comfort. Experience reduced dive under braking and squat under acceleration for a more controlled driving experience. Here are the key benefits:

• Reduced body roll for tighter handling
• Decreased dive under braking
• Enhanced grip for improved performance
• 1/2" front lowering without compromising rear comfort
• Preset to prevent spring sag
• Shot-peened for stress relief and durability
• Worth 2 points toward your Dinan badge

For over 35 years, Turner Motorsport has been at the forefront of BMW tuning, offering meticulously developed and tested parts that preserve the original driving feel while enhancing performance. Backed by a four-year, 50,000-mile warranty, Turner Motorsport ensures quality and reliability in every product.