Packaged by Turner BMW Cooling System Parts & Accessories

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 2008-2010 E60 528i/528xi models with an automatic transmission (N52 engine).

Much of the later E60 cooling system is strong and reliable compared to the previous generation 5-series models. But there is still the potential for serious cooling system and engine-related failures. On the N52 engine the electric water pump is the weakest link. It will fail without much warning and shut down the engine. Preventative replacement is the best course of action and the water pump and thermostat should be done before they reach 60,000 miles. Several other cooling components are due for replacement by 100,000 miles to prevent other breakdowns. A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system.

Our base kit comes with the OEM Behr thermostat, Original BMW electric water pump with mounting screws, and the u-shaped hose between the pump and thermostat. From there you can add additional items to complete the overhaul - radiator, expansion tank, cap, and new radiator hoses..

E60 528i Automatic Radiator Options. There are two styles of radiators for the E60 6-cylinder and automatic transmission: original and updated. You can use either radiator as long as you have the correct corresponding parts to go with it. Both radiators are still available from BMW or the OE supplier Behr. If it were up to us we would prefer the updated style because it won't cause any confusion down the road and it reduces the number of potential leak points by eliminating an unnecessary fitting.

• Original, BMW #17117534914. This setup has an extra fitting for the engine oil heat exchanger along with a hose that attaches to the water pump pipe and heat exchanger. In order to use this radiator you must use the corresponding hose. This was the original setup as the car was built at the factory and is pictured in the radiator image to the right. At some point BMW stopped listing this part number in their official diagrams and used the 209 number below.
• Updated, BMW #17117519209. This is the updated style from BMW. If your radiator was replaced at some point after 2010 it most likely has this radiator style. On this radiator they did away with the extra fitting for the heat exchanger. When looking at the ETK or RealOEM diagrams it will only list this radiator but with a note saying you also need two compensators (spacer blocks, #17117520335) and the hose (11537519494).

Click here for diagrams of both E60 radiator options.

E60 528i Cooling Hoses. There are a lot of hoses on the N52 engine. Not all of them need to be replaced during an overhaul but it would be a good idea. The hoses themselves don't wear but the metal spring clips on the connector lose their tension over time and that can lead to a leak. It's worse when re-using a hose after it's already been disconnected. Since our package includes the thermostat, water pump, and radiator we offer all of the hoses related to those components. Use the diagram on the right to see where each is connected in the engine bay. Evaluate your current hoses and then decide which ones to replace. One note about the lower radiator hose: when ordering a new hose you must order a new temp sensor. Do not reuse the original temp sensor as it will leak on the new hose.

This item fits the following BMWs:
2008-2010 E60 BMW 528i 528xi with automatic transmission

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E30 with the M42 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

318i 318is M42

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank Pierburg Full Aluminum Water Pump ECS Aluminized Water Pump Hose V2.0 Bremmen Parts Thermostat ECS Performance Silicone Radiator Hose Kit Genuine BMW Blue G48 Antifreeze (2 Gallons) Redline Water Wetter (12 oz.)

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank ECS Silicone Radiator Hoses Wahler Thermostat (80°C) Bremmen Aluminum Water Pump Bremmen Parts Auxiliary Fan Switch Genuine BMW Water Pump O-Ring Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E53 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

09/2002 - 2006 - E53 3.0i with manual transmission 

In as little as 60,000 miles, cooling system components are prone to failure. Due to weak plastic and rubber construction, vital cooling system parts—such as the radiator hoses and the expansion tank—can fail spectacularly, risking damage to internal engine components.

Prevent costly engine damage and ensure long-term reliability with our Performance Cooling System Refresh Kit, featuring components hand-picked by our team of BMW enthusiasts. This comprehensive kit includes high-quality components designed to address common failure points, providing a durable, performance-focused cooling system repair. By replacing aging factory parts with premium alternatives, you can enhance cooling efficiency and protect your engine from the stress of overheating.

This full-service "Level 1" Performance Cooling System Refresh Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank OE Expansion Tank Cap OE Coolant Level Sensor Silicone Coolant Overflow Hose OE Radiator Hoses Mishimoto Racing Thermostat (68°C) Geba Water Pump w/ Aluminum Impeller OEM Timing Belt Kit with Tensioner Radiator Drain Plug Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

In as little as 60,000 miles, cooling system components are prone to failure. Due to weak plastic and rubber construction, vital cooling system parts—such as the radiator hoses and the expansion tank—can fail spectacularly, risking damage to internal engine components.

Prevent costly engine damage and ensure long-term reliability with our Performance Cooling System Refresh Kit, featuring components hand-picked by our team of BMW enthusiasts. This comprehensive kit includes high-quality components designed to address common failure points, providing a durable, performance-focused cooling system repair. By replacing aging factory parts with premium alternatives, you can enhance cooling efficiency and protect your engine from the stress of overheating.

This full-service "Level 2" Performance Cooling System Refresh Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank OE Expansion Tank Cap OE Coolant Level Sensor Silicone Coolant Overflow Hose ECS Tuning Aluminum Radiator OE Radiator Hoses Mishimoto Racing Thermostat (68°C) Geba Water Pump w/ Aluminum Impeller OEM Timing Belt Kit with Tensioner Radiator Drain Plug Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E82/88 135i or E90/92/93 335i/xi/is with the N54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

For vehicles with manual transmission only

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
• ECS Tuning Aluminized Water Pump Hose
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• OEM VDO Water Pump
• Genuine BMW Hardware for Easy Installation
• Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E53 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

2000 - 09/2002 - E53 3.0i with automatic transmission 

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E53 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

09/2002 - 2006 - E53 3.0i with automatic transmission