BMW Water Pumps

Water Pump And Thermostat Kit - BMW N55 F Chassis

Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.

This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.

Signs Your Water Pump and Thermostat May Need Replacement:

• Engine overheating or failing to reach operating temperature
• Water pump running intermittently or erratically
• Cooling fans operating at maximum output
• Engine fault codes, including 20A804

Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.

Over time, the water pump in BMW vehicles becomes a common point of failure, typically requiring replacement around the 60,000-mile mark. To ensure optimal performance of your vehicle's cooling system, it's also advisable to replace the thermostat during this service. Turner aims to make this maintenance task easier with its all-in-one Water Pump & Thermostat Replacement Kit.

This comprehensive kit includes:

Water Pump - OEM Geba (11519071562) 80°C Thermostat - OEM MAHLE (11531713040) Thermostat Housing - URO Parts (11531730470) Thermostat Housing Gasket - Genuine BMW (11531722692) Antifreeze/Coolant, 1 Gallon - Genuine BMW (82141467704) Opt for this premium kit to ensure a thorough and reliable repair, extending the lifespan of your BMW's cooling system.

Maintain your BMW's cooling system and avoid costly repairs with our all-inclusive Water Pump and Thermostat Replacement Kit, expertly crafted by enthusiasts at Turner Motorsport. Designed specifically for your BMW model, this kit ensures proper engine operation at optimal temperatures, preventing overheating and extending engine life.

Key Benefits:

Comprehensive Kit: Simplify your cooling system overhaul with all necessary components in one package. High-Quality Parts: Each component meets or exceeds OEM standards, ensuring reliable performance and longevity. Optimal Cooling Performance: Regular water pump and thermostat replacement every 60,000 miles maintains peak cooling efficiency. Enhanced Reliability: Premium components like the Wahler Thermostat and Graf Water Pump ensure durable, long-lasting performance. Why Choose This Kit:

Maximize Cooling System Performance: Replacing your water pump and thermostat simultaneously ensures your BMW’s cooling system operates efficiently. Protect Your Engine: Properly flushing and refilling your cooling system with Genuine BMW coolant guarantees optimal freeze protection and corrosion resistance. Convenient and Cost-Effective: Combining all essential parts in one kit simplifies maintenance and ensures a thorough, lasting repair. Planning a cooling system overhaul? Opt for this comprehensive thermostat and water pump replacement kit for a lasting repair.

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump

As a common failure point among all BMW models, the water pump should be serviced every 60,000 miles. While doing so, it's wise to change the thermostat to ensure proper functionality of your vehicle's cooling system. Thankfully, Turner Motorsport has combined these parts into one simple kit, making your cooling system refresh easier than ever. This Water Pump & Thermostat Replacement Kit Includes:

Meyle Water Pump - Metal Impeller (11510393338) Hamburg-Technic Thermostat (11531743017) Genuine BMW Coolant/Antifreeze (82141467704) Genuine BMW Installation Hardware Looking to maintain your M44 cooling system while enhancing cooling capabilities? Choose this performance kit assembled by the enthusiasts at Turner Motorsport and keep your BMW running cool and efficiently!

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

• OEM VDO electric water pump, p/n 11517588885 or 11517632426
• OEM mounting screws for water pump (set of 3), p/n 11517602123
• OEM Behr thermostat, p/n 11537549476
• Original BMW connecting hose from thermostat to water pump, p/n 11537545665
• Original BMW hose clamps for hose (x 2)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.
  
  How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.
  
  This water pump package fits the following BMWs with the N54 engine:
  2007-2010 E60 BMW 535i 535xi 535i xDrive
  2008-2010 E82 BMW 135i
  2011-2012 E82 BMW 1M Coupe
  2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
  2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
  2007-2010 E93 BMW 335i - Convertible

Why not upgrade when you're due for a replacement? The ECS Tuning silicone hose replacement fixes these issue with two key features in their design. Offering this hose in a much more heat resistant silicone instead of OE rubber and having the hose wrapped in aluminum. The aluminum coating acts as a heat shield to further protect the silicone as well as reducing the temperatures forced on the coolant running through the hose. 

Replaces OE hose #11537545665

Don't take your car's cooling system for granted. A waterpump failure can cost you an engine, which is why preventatively replacing your BMWs waterpump and refreshing the cooling system every 60,000 miles. The water pump is a weak point is the cooling system. Replacing your waterpump will go a long way for keeping your car on the road and operating properly. This water pump fits many 2006 and newer BMW 6 cylinder engines, specifically all the BMWs with the N51, N52, N53 engines. You will also need to purchase replacement aluminum screws Part #11510392553 

Pierburg pumps are some of the most trusted and widely used on the market. From fuel, water, air and vacuum Pierburg has you covered with OE quality and reliable performance year after year.

This water pump fits the following BMWs:
2008-20xx E82 128i
2006-2006 E90 325i sedan, 330i sedan, 325xi sedan, 330xi sedan
2007-2012 E90 328i sedan, 328xi sedan, 328i xDrive sedan
2007-2012 E92 328i coupe, 328xi coupe, 328i xDrive coupe
2007-2012 E93 328i Convertible
2006-2006 E60 525i, 525xi, 530i, 530xi
2007-2010 E60 528i, 528xi, 528i xDrive
2007-2010 E83 X3 3.0i X3 3.0si
2007-20xx E70 X5 3.0si X5 xDrive30i 
2006-2008 E85 Z4 3.0si
2009-20xx E89 Z4 sDrive30i

BMW N55 3.0L Water Pump is an essential component for maintaining the performance and reliability of your BMW. Manufactured by Turner Motorsport, this high-quality water pump is designed to ensure optimal cooling efficiency for the N55 3.0L engine.

• Reliable Performance: Designed to handle the high demands of the BMW N55 engine, ensuring consistent cooling performance.
• High-Quality Construction: Made with durable materials to resist wear and provide long-lasting service.
• Prevents Overheating: Helps prevent engine overheating by effectively circulating coolant throughout the engine.
• Reduces Coolant Leaks: Engineered to minimize the risk of leaks, maintaining proper coolant levels and engine temperature.
• Quiet Operation: Operates smoothly and quietly, avoiding the whining noises often associated with failing pumps.