Find Parts That Fit Your Vehicle

Home
Suspension
Control Arm Replacements & Upgrades

Powerflex BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Front Lower Control Arm Inner Bushing - BMW 1502-2002 (1962 - 1977) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:585851

Part#: PFF5-2001X2

Back Ordered

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

Secure vintage front axle stability. These high-performance polyurethane inner bushings eliminate control arm deflection, ensuring track-ready geometry retention and absolute steering communication under extreme loading.

Show More Show Less

F10 M5, F06/F13 M6 Front Upper Thrust Arm Inner Bushings - Street - P...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4894544

Part#: PFF5-6201

Back Ordered

$ 242.99 USD

Add to Wish List

Qty

$ 242.99 USD

Add to Wish List

The factory-installed rubber control arm bushings often result in a disconnected and imprecise sensation in the front suspension, particularly as they wear out, causing excessive deflection. This, in turn, leads to imprecise steering, vibrations, and subpar handling, resulting in a somewhat unstable driving experience. In contrast, these urethane bushings offer superior stiffness compared to the stock rubber ones, minimizing deflection. This contributes to maintaining consistent alignment and results in a more secure and confidence-boosting feel while driving. Furthermore, the added benefit of a lifetime warranty means you're unlikely to incur any future expenses for replacing these bushings. OE / OEM Cross Reference Numbers: 31122284976

Show More Show Less

MINI R53 Powerflex Rear Trailing Arm Complete Bushing Set - Performan...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26238497

Part#: PFR5-1104X2

In Stock

$ 121.99 USD

Add to Wish List

Qty

$ 121.99 USD

Add to Wish List

Powerflex Polyurethane Rear Trailing Arm Bushings

Ensure precise handling and stability for your Mini with Powerflex Polyurethane Rear Trailing Arm Bushings. These bushings play a crucial role in maintaining rear suspension triangulation, preventing deflection that can lead to suspension geometry changes and uneven tire wear.

Benefits:

Firmer than OEM bushings, reducing deflection
Improves handling over bumps and during cornering
Extends tire wear with proper alignment
Manufactured to exact-fit standards for premium performance
Ideal for street-driven vehicles and occasional autocross or track use

Powerflex, Europe's top-selling suspension bushing manufacturer, offers durability and performance with their polyurethane bushings. For ease of installation, use Powerflex Copper Grease PCG1, and enjoy a lifetime warranty on all products.

Show More Show Less

R55 / R56 Front Control Arm Rear Bushing - Caster Adjusted - PFF5-201...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21966011

Part#: PFF5-201G

In Stock

$ 213.99 USD

Add to Wish List

Qty

$ 213.99 USD

Add to Wish List

Elevate your Mini Cooper's performance and handling with the Powerflex Front Control Arm Rear Bushing, Caster Adjusted. These meticulously crafted components offer a multitude of advantages, bolstering your vehicle's suspension system with precision engineering. Enhanced Handling: Tailored to elevate your Mini Cooper's handling, Powerflex Front Control Arm Rear Bushings feature caster adjustment capabilities. This fine-tuning ability allows you to optimize your vehicle's alignment, resulting in a more responsive and controlled driving experience. This is especially notable during high-speed maneuvers and cornering. Improved Stability: The caster adjustment feature empowers you to refine your Mini Cooper's caster angle, a critical factor in steering stability. This enhancement minimizes the need for constant steering corrections, providing a more confident and secure grip on the road. Exceptional Durability: Crafted from premium materials, Powerflex Front Control Arm Rear Bushings are engineered for longevity. They resist wear and deterioration, setting them apart from OEM rubber bushings and ensuring a prolonged lifespan, thus reducing the frequency of replacements. Vibration Dampening: These bushings are designed to dampen vibrations and reduce road noise, resulting in a smoother and quieter ride. This, in turn, enhances driving comfort and reduces fatigue during extended journeys. Precise Alignment: Achieving the correct caster angle is crucial for optimal steering and even tire wear. The Powerflex Front Control Arm Rear Bushing, Caster Adjusted, provides the means to precisely fine-tune your Mini Cooper's alignment, ensuring both even tire wear and exceptional handling. By integrating Powerflex Front Control Arm Rear Bushings with caster adjustment into your Mini Cooper's suspension system, you take command of your vehicle's performance. Experience heightened handling, stability, and endurance, all while enjoying a more serene and comfortable ride. Elevate your Mini Cooper's driving experience with these top-tier components and savor the benefits of superior control and responsiveness on the open road.

Show More Show Less

Front Tension Strut Bushings - G01/G02 X3/X4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54281629

Part#: PFF5-2601

In Stock

$ 271.99 USD

Add to Wish List

Qty

$ 271.99 USD

Add to Wish List

Lock down front axle geometry on your G01/G02. These 95A polyurethane bushings feature a 300% rigidity increase, permanently neutralizing wheel migration and dynamic toe deflection under maximum braking forces.

Show More Show Less

Heritage Series Front Sway Bar Bushing 26 Mm - E46

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54352777

Part#: PFF5-4602-26H

Ships in 1 Business Day

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

Eliminate front anti-roll bar slop on your E46 M3. These 26mm Heritage polyurethane bushings maximize bar transition response while maintaining a discrete, factory-original dark grey appearance.

MINI F55 to F57 Front Control Arm Front Bushings With Fixed Camber Of...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31390608

Part#: PFF5-1301GFX

Ships in 1 Business Day

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

MINI F55 to F57 Front Control Arm Front Bushings With Fixed Camber Offset are engineered to enhance wheel geometry and performance. Featuring CNC-machined aluminum outer shells with a fixed offset bore, these bushings are designed to withstand curb strikes and the extreme lateral forces from slick tires and circuit racing. The bushings are made from Black 95A durometer material with a knurled bore, offering increased stiffness (+60%) and durability compared to OE rubber bushings. This design minimizes control arm stiction and significantly reduces deflection.

Enhanced Durability: CNC-machined aluminum outer shells with fixed offset bore provide superior strength and resilience.
Improved Stiffness: Black 95A durometer bushings offer increased stiffness (+60%) over factory rubber, reducing deflection and control arm stiction.
Optimized Camber: Increases negative camber by 0.75°, improving grip and wheel geometry.
Tested Performance: Approved by the Mini Challenge in the UK for reliable, grip-focused wheel alignment.
Advanced Construction: Knurled bore ensures a secure fit and enhanced durability under extreme conditions.

These bushings are ideal for those seeking improved handling and performance for their MINI F55 to F57.

Show More Show Less

MINI R50 to R61 Performance Polyurethane Rear Trailing Arm Bushing Se...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31291017

Part#: PFR5-1102X2

Ships in 1 Business Day

$ 75.99 USD

Add to Wish List

Qty

$ 75.99 USD

Add to Wish List

MINI R50 to R61 Performance Polyurethane Rear Trailing Arm Bushing Set is designed to enhance rear suspension stability and vehicle handling. OEM rubber bushings, while initially effective, tend to deflect under load, leading to changes in suspension geometry, clunking sounds, and uneven tire wear. These Powerflex polyurethane bushings offer a firmer, more resilient alternative, significantly reducing deflection and improving handling performance. Engineered by Powerflex, Europe's top suspension bushing manufacturer, these bushings are built to exacting standards, providing superior durability and performance compared to factory options. Ideal for both daily driving and occasional track use, these bushings help maintain proper alignment and extend tire life. For best results, use Powerflex Copper Grease PCG1 during installation and reapply periodically to ensure a squeak-free operation.

Improved Stability: Reduces deflection and maintains consistent suspension geometry.
Enhanced Handling: Provides better handling over bumps and during cornering.
Durable Construction: High-quality polyurethane material ensures longer lifespan and reliability.
Precision Engineering: Made to exact-fit standards for superior performance.
Versatile Use: Suitable for street driving and occasional track use; consider Powerflex Black Series for dedicated track cars.
Lifetime Warranty: Backed by Powerflex to the original purchaser.

Show More Show Less

PowerFlex Rear Upper Lateral Arm To Chassis Bushing - E8x, E9x - N52,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54281637

Part#: PFR5-413BLK

Ships in 1 Business Day

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

This component provides a major performance upgrade by delivering the rigid geometry control of a metallic spherical bearing, but with significantly higher longevity and resistance to track debris binding.

Show More Show Less

Powerflex Heritage Series Front Upper Control Arm Bushing (Thrust Rod...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51567118

Part#: PFF5-601H

In Stock

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

Manufactured using the same premium polyurethane as our street series, but in a dark grey color. These bushings improve any collector car, while retaining the same standard appearance of a rubber bushing.

Show More Show Less

Powerflex BMW E28 5 Series / E24 6 Series Front Lower Control Arm To ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34181287

Part#: PFF5-802H

Ships in 1 Business Day

$ 90.99 USD

Add to Wish List

Qty

$ 90.99 USD

Add to Wish List

The Powerflex Front Lower Control Arm to Subframe Bushings (Heritage) for the BMW E28 5 Series and E24 6 Series offer a balance of classic style and modern performance.

Heritage Design: Retro-inspired look with advanced polyurethane material for long-lasting durability.
Enhanced Handling: Reduces movement between the control arm and subframe, improving steering precision and overall stability.
Durable Polyurethane: Stronger than rubber, resisting wear and damage from road elements.
Easy Fit: Direct replacement for original bushings, ensuring a straightforward upgrade.

Ideal for vintage BMW owners who want to improve suspension performance while preserving the car’s classic feel.

Show More Show Less

Heritage Series Front Sway Bar Bushing - 21mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54317221

Part#: PFF5-4602-21H

Back Ordered

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

Eliminate sway bar deflection on your BMW. These 21.5mm Heritage polyurethane bushings maximize front bar transition response while maintaining a discrete, factory-original dark grey undercarriage layout.

Show More Show Less

1
…
6
7
8
…
11

Select Vehicle

Category

Control Arm Replacements & Upgrades

Brand

View All Brands

Price

Special Offers

New (25)

Shipping