Find Parts That Fit Your Vehicle

Home
Suspension
Control Arm Replacements & Upgrades

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Rear Control Arm Bushings (1)

Sort By:

SPC Adjustable Rear Lower Control Arm (Single) - E36 E46 Z4

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:376147

Part#: 67110

In Stock

26% off MSRP $ 184.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD

Add to Wish List

Qty

26% off MSRP

$ 184.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD

Add to Wish List

For BMW E36 and E46 chassis this tubular style arm is great when lowering this popular vehicle, or for correcting rear camber on stock vehicles.

Rear Adjustment range: Camber -1.00° to +3.00°
Installation time: 1.3 hr/side
Required: 1 per wheel

Show More Show Less

MINI F54 to F60 Rear Adjustable Camber Arm - Pair - SPC Performance -...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:31423683

Part#: 67108KT

Ships in 6 Business Days

$ 271.99 USD

Add to Wish List

Qty

$ 271.99 USD

Add to Wish List

MINI F54 to F60 Rear Adjustable Camber Arm - Pair - SPC Performance - Lower is designed to enhance the handling and alignment of lowered MINI vehicles. This adjustable control arm allows for precise rear camber adjustments while maintaining factory alignment settings, making it ideal for vehicles with modified suspension setups.

Enhanced Adjustability: Offers a camber adjustment range of ±3.0°, allowing for precise alignment tuning.
Durable Construction: Made from high-strength steel with fully forged ends for maximum durability and performance.
Reduced NVH: Features high durometer rubber bushings that minimize noise, vibration, and harshness for a smoother driving experience.
Improved Handling: Helps retain factory alignment even with lowered suspension, optimizing handling characteristics.

This set includes two rear camber arms for a complete upgrade.

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:600206

Part#: 193926-3H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

MMX Performance G8X / F8X Adjustable Toe Arm Set

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56363320

Part#: MMR55-1609

Ships in 4 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

Engineered specifically for the BMW M2, M3, and M4, MMX Performance Adjustable Toe Arms replace flexing factory bushings with precision pillow ball rod ends. CNC machined from lightweight billet 6061-T6 aluminum, these arms lock in your alignment specs under cornering

Show More Show Less

Eibach Pro-Alignment Steel Rear Lower Control Arm Kit - E36 E46 E83 Z...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:372590

Part#: 5.67110K

In Stock at Vendor

10% off MSRP $ 328.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 295.00 USD

Add to Wish List

Qty

10% off MSRP

$ 328.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 295.00 USD

Add to Wish List

When you lower your BMW, the camber is altered and can negatively affect how your BMW handles. In order to dial in your camber for the best performance and handling, Eibach offers their Pro-Alignment Kit for your E36, E46, E83 X3, and Z4 BMW.

Allows for +3.0 to -1.0 degress of rear camber adjustment.

Show More Show Less

MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:31423675

Part#: 195026K

Special Order: No Guaranteed ETA

$ 480.00 USD

Add to Wish List

Qty

$ 480.00 USD

Add to Wish List

MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms - Pair are designed to enhance the handling and performance of your MINI. These high-duty camber adjustable lower arms are crafted for competition use, featuring durable chrome-moly tubing and high-quality bushings. They provide precise camber adjustment to optimize wheel alignment and handling characteristics, making them ideal for track or spirited driving.

Key benefits of the MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms - Pair include:

Enhanced Handling: Allows for precise camber adjustments to fine-tune wheel alignment for improved handling and stability.
High-Duty Construction: Made from chrome-moly tubing for superior strength and durability under high-stress conditions.
Improved Performance: Designed for competition use, these arms are built to withstand rigorous driving demands.
Durable Bushings: Equipped with high-quality bushings to ensure reliable performance and longevity.
Optimized Alignment: Facilitates better alignment adjustments, contributing to enhanced driving dynamics and tire wear.

Project Cars

SELECT YOUR BMW

BMW Control Arm Replacements & Upgrades

Sub-Categories

SPC Adjustable Rear Lower Control Arm (Single) - E36 E46 Z4

MINI F54 to F60 Rear Adjustable Camber Arm - Pair - SPC Performance -...

Adjustable Rear Upper/Inner Camber Bushings

MMX Performance G8X / F8X Adjustable Toe Arm Set

Eibach Pro-Alignment Steel Rear Lower Control Arm Kit - E36 E46 E83 Z...

MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results