Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Rear Trailing Arm Bushings (RTAB) - Rubber Street - E30, 318ti, Z3 (O...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:1436
Part#: 33329061945
Ships in 5 Business Days
$ 63.99 USD
Free Shipping on orders $49 and up
These trailing arm bushings are the stock rubber centered bushing. Each side of the car takes one pair of bushings.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318ti
1976-1981 E12 BMW 528i
1986-1988 E28 BMW 528e
1976-9/1982 E24 BMW 630csi 633csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
Show More Show Less
SPL Parts Titanium Series Adjustable Rear Toe Arms with Eccentric Loc...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
SPL Parts - Corporate Logo
T#:553695
Part#: SPLRTAELF8X
In Stock
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less
ECS Rear Trailing Arm Bushing Limiter Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:362987
Part#: 003301ECS01AKT
In Stock
Sale - Save 5% $ 88.99

This product was last offered at the strikethrough price on
06-13-2026

$ 84.54 USD
Free Shipping
Sale - Save 5%
$ 88.99

This product was last offered at the strikethrough price on
06-13-2026

$ 84.54 USD
Free Shipping

The E36/E46 rear trailing arm bushings (RTABs) wear out faster than any other bushing on the car. Worn RTAB will cause excessive toe alignment change and give a 'loose' or 'floaty' feeling in the rear handling. One of the reasons for this is that they over-extend during motion, stretching and twisting the rubber in all directions. These shims sit on either side of the bushing and limit the amount of extension from the bushing. Not only will you get more life from your RTAB but these will help stiffen the bushing during cornering. But during normal driving you will still have all of the comfort of the stock rubber bushings. These part about these bushings is how easy they are to install - simply slide them in place during your bushing install. They can be added to pre-installed bushings too by dropping the trailing arm and removing the cage around the bushing.

Works with stock rubber bushings only (not urethane or Delrin).

Show More Show Less

Turner Monoball Front Thrust Arm Bushings Upgrade - A90 / G20 / G29 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:599479
Part#: 005654LA01
In Stock
Sale - Save 20% $ 454.99

This product was last offered at the strikethrough price on
06-14-2026

$ 363.99 USD
Free Shipping
Sale - Save 20%
$ 454.99

This product was last offered at the strikethrough price on
06-14-2026

$ 363.99 USD
Free Shipping
BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.
Show More Show Less

TRW Front Thrust arm - Left - F22, F23, F30, F32, F33, F36
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
TRW - Corporate Logo
T#:395054
Part#: 31126855741
Back Ordered
$ 147.99

This product was last offered at the strikethrough price on
01-12-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Thrust arm with ball joint
Race Polyurethane Rear Trailing Arm Bushing Set - E36, E46, Z4 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Powerflex Black Series - Corporate Logo
T#:362721
Part#: PFR5-3608BX2
In Stock
$ 101.99 USD
Free Shipping
$ 101.99 USD
Free Shipping

Rear trailing arm bushings serve the key purpose of keeping rear suspension triangulated and the vehicle moving where it's directed to. Though failure prone, even factory-fresh OEM rubber bushings allow for deflection, causing suspension geometry changes on hard launches, over bumps in the road, and during cornering. This deflection results in clunking in the rear end, a “rear steer” feeling, and uneven tire wear.

Powerflex polyurethane rear trailing arm bushings are firmer than OEM bushings, resulting in a reduction of deflection that causes these suspension angle changes, improving handling over bumps and with a proper alignment, extending tire wear.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This Product fits the following BMWs:
E36 1992-1999 318i 318is 318ti 320i 323i 325i 325is 328i 328is 
E46 2000-2006
Z4 All

Show More Show Less

TRW Right Rear Wishbone
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
TRW - Corporate Logo
T#:348929
Part#: 33322283546
In Stock
$ 136.14

This product was last offered at the strikethrough price on
04-27-2026

$ 67.36 USD
Free Shipping on orders $49 and up
$ 67.36 USD
Free Shipping on orders $49 and up

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

 

33322283546

Turner Motorsport Thrust Arm Monoball Upgrade - Pre-Installed Arms -E...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:401560
Part#: 022010TMS02
In Stock
Sale - Save 3% $ 702.99

This product was last offered at the strikethrough price on
06-14-2026

$ 681.90 USD
Free Shipping
Sale - Save 3%
$ 702.99

This product was last offered at the strikethrough price on
06-14-2026

$ 681.90 USD
Free Shipping
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.
Show More Show Less

TRW Left Rear Wishbone
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
TRW - Corporate Logo
T#:348928
Part#: 33322283545
In Stock
$ 69.99 USD
Free Shipping on orders $49 and up

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

 

33322283545


Rein Rear Lower Control Arm Balljoint - Outer - E82, E88, E90, E91, E...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:403252
Part#: 33326792553
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up
Restore your vehicle's original handling feel.
OEM Lemforder Front Control Arm - Left - E46 M3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:3652
Part#: 31122229453
In Stock
$ 608.99

This product was last offered at the strikethrough price on
04-23-2026

$ 389.99 USD
Free Shipping
$ 389.99 USD
Free Shipping

This E36 or Z3 front control arm is a direct replacement for the original part and is the OEM Lemforder brand.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

We also recommend replacing the bushings when changing the control arms. The bushings are mounted at the back of the control arm and located the arm to the frame rail on the car. The stock bushings are rubber and will wear out sooner than the control arms themselves. With the control arm off the car now is the perfect time to also replace the bushings.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2001-2006 E46 BMW M3

Show More Show Less
OEM Lemforder Front Control Arm - Right - E46 M3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:3653
Part#: 31122229454
In Stock
$ 545.99

This product was last offered at the strikethrough price on
05-07-2026

$ 460.99 USD
Free Shipping
$ 460.99 USD
Free Shipping

This E46 M3 front control arm is a direct replacement for the original part and is the OEM Lemforder brand.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

We also recommend replacing the bushings when changing the control arms. The bushings are mounted at the back of the control arm and located the arm to the frame rail on the car. The stock bushings are rubber and will wear out sooner than the control arms themselves. With the control arm off the car now is the perfect time to also replace the bushings.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2001-2006 E46 BMW M3

Show More Show Less