Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
Revshift - Corporate Logo
T#:582005
Part#: PTABE6GREEN
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a standard 10mm pin diameter
Revshift - Corporate Logo
T#:1105924
Part#: RSM-E6-10MM
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.
Show More Show Less

Dinan Tension Strut Ball Joint Kit - Front - G20 G22/23/26 G29 A90/91...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:598376
Part#: D280-0022
Ships in 6 Business Days
Sale - Save 10% $ 425.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 383.36 USD
Free Shipping
Sale - Save 10%
$ 425.99

This product was last offered at the strikethrough price on
09-29-2026

$ 383.36 USD
Free Shipping
An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness. Reduces brake shimmy. Nylon-lined bearings for quiet operation. Machined aluminum housings. Sealed bearings.
Show More Show Less

Revshift - Corporate Logo
T#:582007
Part#: PSBE36GREEN
Ships in 6 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582006
Part#: PTABE30GREEN
Ships in 3 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:582015
Part#: PCABE30BLACK
Ships in 3 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582008
Part#: PSBE36BLACK
Ships in 3 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Active Autowerke - Corporate Logo
T#:397248
Part#: 13-004
Ships in 4 Business Days
5% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping
5% off MSRP
$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping

The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

 

Previously used Active Autowerke Part Number AA-DSB-E36

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

Show More Show Less

Revshift - Corporate Logo
T#:1105899
Part#: FBK-E36C95A
Ships in 10 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105909
Part#: RBK-E3095A
Ships in 6 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Genuine MINI - Corporate Logo
T#:54178
Part#: 31122167245
Ships in 1-2 days
8% off MSRP $ 118.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.38 USD
Free Shipping
8% off MSRP
$ 118.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.38 USD
Free Shipping
Genuine MINI SET, CONTROL ARM BALL JOINTS


Revshift - Corporate Logo
T#:1105916
Part#: PSB-E3095A
Ships in 8 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105904
Part#: PSB-E46M
Ships on Jan 21, 2027
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a larger 12mm pin diameter
Revshift - Corporate Logo
T#:1105925
Part#: RSM-E6-12MM
Ships in 3 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.
Show More Show Less

Revshift - Corporate Logo
T#:1105922
Part#: PSB-318TI95A
Ships in 2 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Genuine MINI - Corporate Logo
T#:414735
Part#: 31126757551
Ships in 1-2 days
13% off MSRP $ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
Genuine MINI - Corporate Logo
T#:193089
Part#: 33506867478
Ships in 1-2 days
9% off MSRP $ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
9% off MSRP
$ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
Genuine Mini Guide Support

Genuine MINI - Corporate Logo
T#:22938
Part#: 33526754124
In Stock
27% off MSRP $ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
27% off MSRP
$ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
Genuine MINI RIGHT GUIDE SUPPORT
Genuine MINI - Corporate Logo
T#:22937
Part#: 33526754123
Ships in 1-2 days
27% off MSRP $ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping on orders $49 and up
27% off MSRP
$ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping on orders $49 and up
Genuine MINI LEFT GUIDE SUPPORT

Genuine MINI - Corporate Logo
T#:55350
Part#: 31356778827
In Stock
8% off MSRP $ 31.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
8% off MSRP
$ 31.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Genuine MINI STABILIZER SUPPORT

Revshift - Corporate Logo
T#:1105926
Part#: ASB-E9X
Ships in 5 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
Revshift billet aluminum subframe bushings completely replace the oem rubber bushings on the BMW E82, E90, E91, E92, and E93 including the M3, 1M, and XI models. These bushings solid mount the rear subframe reducing wheel hop and improving the vehicles handling capabilities. The two piece bushing design sandwiches the subframe locking it in place. It will not shift on the bushings while driving like the one piece designs allow. They are CNC machined at Revshift in the USA from 6061-T6 billet aluminum.
Show More Show Less
Revshift - Corporate Logo
T#:582014
Part#: PCABE30GREEN
Ships in 8 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105914
Part#: RBK-E3095A12MM
Ships in 8 Business Days
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less


Revshift - Corporate Logo
T#:1980634
Part#: FBKOFFSET
Ships in 8 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Stiffen your suspension and improve your handling with these Revshift upgraded suspension bushings. Improves handing Will not wear out like oem bushings Properly dampens suspension components
F80, F82, F83, F87 Dinan Monoball Front Thrust Arm Bushings (Pair) ...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:396651
Part#: D280-0017
Back Ordered
Sale - Save 10% $ 531.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 478.76 USD
Free Shipping
Sale - Save 10%
$ 531.99

This product was last offered at the strikethrough price on
09-28-2026

$ 478.76 USD
Free Shipping
For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.
Show More Show Less
Revshift - Corporate Logo
T#:1105932
Part#: PSB-E3480A
Ships in 2 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Tension strut ball joint kit
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:23284050
Part#: D280-0019
Back Ordered
Sale - Save 10% $ 519.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 467.96 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 519.99

This product was last offered at the strikethrough price on
09-29-2026

$ 467.96 USD
Free Shipping on orders $49 and up

Revshift - Corporate Logo
T#:1105918
Part#: PSB-E30IX95A
Ships in 8 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:47199272
Part#: PSB-E9X-80A
Ships on Nov 12, 2026
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:1105917
Part#: PSB-E3012MM95A
Ships in 8 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:47199273
Part#: PSB-E9X-95A
Ships in 4 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:582012
Part#: PCABE30M3GREEN
Ships in 8 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:582013
Part#: PCABE30M3
Ships in 8 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Genuine MINI - Corporate Logo
T#:15333
Part#: 31126772303
In Stock
26% off MSRP $ 119.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD
Free Shipping
26% off MSRP
$ 119.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD
Free Shipping
Genuine MINI BALL JOINT, LEFT
Genuine MINI - Corporate Logo
T#:21784
Part#: 31126783443
Ships in 1-2 days
6% off MSRP $ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
Genuine MINI BALL JOINT


Genuine MINI - Corporate Logo
T#:4469688
Part#: 31128831645
In Stock
9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
9% off MSRP
$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
Genuine MINI - Corporate Logo
T#:15334
Part#: 31126772304
In Stock
26% off MSRP $ 119.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD
Free Shipping
26% off MSRP
$ 119.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD
Free Shipping
Genuine MINI BALL JOINT, RIGHT
Genuine MINI - Corporate Logo
T#:3239439
Part#: 31128831646
In Stock
9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
9% off MSRP
$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping

Genuine MINI - Corporate Logo
T#:195113
Part#: 33536863755
Ships in 7 Business Days
11% off MSRP $ 35.98

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 35.98

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
Genuine Bmw Set, Spring Base, Lower

JT Design - Corporate Logo
T#:1386
Part#: JTD909-75-KIT
Ships in 5 Business Days
$ 32.00 USD
Free Shipping on orders $49 and up
The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).
Show More Show Less
Dinan Tension Strut Ball Joint Kit - G8X M2 M3 M4
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:21045532
Part#: D280-0030
Special Order: No Guaranteed ETA
Sale - Save 10% $ 415.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 374.36 USD
Free Shipping
Sale - Save 10%
$ 415.99

This product was last offered at the strikethrough price on
09-29-2026

$ 374.36 USD
Free Shipping
An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. They are also sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness Reduces brake shimmy Nylon-lined bearings for quiet operation Machined aluminum housings Sealed bearings Compatible with both RWD and xDrive models
Show More Show Less

KMAC - Corporate Logo
T#:31522921
Part#: 193616-6H
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping on orders $49 and up
F22, F3X Dinan Monoball Front Thrust Arm Bushings (Pair)
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389095
Part#: D280-0014
Ships in 6 Business Days
Sale - Save 10% $ 425.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 383.36 USD
Free Shipping
Sale - Save 10%
$ 425.99

This product was last offered at the strikethrough price on
09-28-2026

$ 383.36 USD
Free Shipping

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an F22 2-series or F3X 3/4-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings. 

We strongly advise using these with new control arms. BMW recommends that the bushings be replaced only once per set of control arms. So if your thrust arm bushings have been replaced already then we do not recommend re-using the arms. The other reason is that the aluminum arms stretch over time which will make the bushings loose inside the arm. Other manufacturers recommend filling the stretched arms with paste but replacing the control arm is the better solution.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F32 BMW 428i 435i - Coupe
2013+ F33 BMW 428i 435i - Convertible
2012+ F34 BMW 328i 335i - Gran Turismo
2012+ F36 BMW 428i 435i - GranCoupe

Show More Show Less

Genuine MINI - Corporate Logo
T#:61445
Part#: 33556778828
Ships in 1-2 days
1% off MSRP $ 21.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.37 USD
Free Shipping on orders $49 and up
1% off MSRP
$ 21.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.37 USD
Free Shipping on orders $49 and up
Genuine MINI STABILIZER SUPPORT

Genuine MINI - Corporate Logo
T#:60676
Part#: 33509807871
In Stock
10% off MSRP $ 141.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD
Free Shipping
10% off MSRP
$ 141.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD
Free Shipping
Genuine MINI LEFT GUIDE SUPPORT
AUTOTECKNIC - Corporate Logo
T#:42571263
Part#: BM-0619PDK
Ships in 7 Business Days
Starting at $ 295.00 USD
Free Shipping on orders $49 and up
Starting at $ 295.00 USD
Free Shipping on orders $49 and up
Revshift - Corporate Logo
T#:47199274
Part#: PSB-E9X-75D
Ships in 8 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less