Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:11953
Part#: E9X-REAR-MOUNTS
In Stock
Sale - Save 15% $ 93.62

This product was last offered at the strikethrough price on
04-06-2026

$ 79.11 USD
Free Shipping
Sale - Save 15%
$ 93.62

This product was last offered at the strikethrough price on
04-06-2026

$ 79.11 USD
Free Shipping
A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
Packaged by Turner - Corporate Logo
T#:11986
Part#: E9X-URSM
In Stock
Sale - Save 4% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 47.04 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 47.04 USD
Free Shipping on orders $49 and up
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401369
Part#: IRPRTM-P
Ships on Aug 19, 2026
$ 110.00 USD
Free Shipping
$ 110.00 USD
Free Shipping

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension. 

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

Meyle Upper Strut Mount - E36, Z3, Z4
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:375473
Part#: 31336779613
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up
Should be replaced each time shocks are replaced due to this being a wearing item
Front Differential Bushing - Priced Each
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362591
Part#: 33171090389
In Stock
$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up

Packaged by Turner - Corporate Logo
T#:11958
Part#: E82MOUNTKIT
In Stock
Sale - Save 13% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 146.16 USD
Free Shipping
Sale - Save 13%
$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 146.16 USD
Free Shipping
Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:
  • front upper strut mounts (also known as a guide support), 31306775098
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!!

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i - Coupe
    2008-2012 E88 BMW 128i 135i - Convertible
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:21735879
    Part#: E30SUPRBM1042KT
    Ships in 4 Business Days
    Sale - Save 8% $ 1,011.00

    This product was last offered at the strikethrough price on
    07-07-2026

    $ 927.16 USD
    Free Shipping
    Sale - Save 8%
    $ 1,011.00

    This product was last offered at the strikethrough price on
    07-07-2026

    $ 927.16 USD
    Free Shipping
    Experience a new level of comfort and control with our Level 3 Comprehensive Suspension Service for your beloved E30 BMW. Say goodbye to clunks, squeaks, and wandering issues plaguing your vehicle's front and rear ends. We provide an all-in-one solution to address these problems, offering superior performance and durability, ensuring your E30 drives better than ever before. Front-End Upgrades: Lemforder Front Lower Control Arms: Replace worn-out control arms with Lemforder precision-engineered components for enhanced stability and handling. Solid Rubber E36 M3 Front Control Arm Bushings: Improve steering feel and responsiveness with these solid rubber bushings, guaranteeing a more connected driving experience. Lemforder Front Sway Bar End Links: Upgrade your sway bar end links to Lemforder for enhanced durability and reduced play, further enhancing your E30's handling. Sachs Front Strut Mounts: Ensure smooth and controlled ride quality with Sachs front strut mounts, providing improved shock absorption and longevity. Lemforder Inner and Outer Tie Rod Assemblies: Replace your tie rod assemblies with Lemforder precision for precise steering and handling. All Required Retaining Hardware: We include all the necessary hardware to ensure a seamless installation, saving you time and hassle. Rear-End Enhancements: Rear Trailing Arm Bushings: Upgrade your rear trailing arm bushings for improved stability and handling characteristics. Rear Stabilizer Links: Replace worn stabilizer links for better control and reduced body roll during cornering. Upgraded Rear Shock Mounts from the E46 M3: Experience improved ride comfort and handling with upgraded rear shock mounts from the E46 M3. ECS Rear Shock Mount Reinforcement Plates: Ensure the longevity and reliability of your shock mounts with ECS reinforcement plates, protecting against deformation. Rear Shock Mount Hardware and Gasket: We provide all necessary hardware and gaskets to complete the installation seamlessly. Rear Subframe Mounts: Enhance rear-end stability and performance with upgraded rear subframe mounts. Differential Bushing: Improve power delivery and drivetrain response with a new differential bushing.
    Show More Show Less

    IRP - Individual Racing Parts - Corporate Logo
    T#:587022
    Part#: IRPRSM-90B
    Ships in 3 Business Days
    $ 195.00 USD
    Free Shipping
    $ 195.00 USD
    Free Shipping
    The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:401618
    Part#: TSU4695PBX/16KT
    In Stock
    Sale - Save 19% $ 230.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 187.99 USD
    Free Shipping
    Sale - Save 19%
    $ 230.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 187.99 USD
    Free Shipping

    For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

     These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:11954
    Part#: TMS11954
    In Stock
    Sale - Save 4% $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 47.04 USD
    Free Shipping on orders $49 and up
    Sale - Save 4%
    $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 47.04 USD
    Free Shipping on orders $49 and up
    A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

    Rear Shock Mount (RSM) Kit consists of:
    A. rear upper-top shock mounts, 33506771737
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33506771738
    D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    The lower mount on the 1M/M3 is integrated on the shock absorber.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

    This item fits the following BMWs:
    2011-2012 E82 BMW 1M
    2008-2011 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:339943
    Part#: E46-MY-DIFF
    In Stock
    $ 88.99

    This product was last offered at the strikethrough price on
    02-26-2026

    Starting at $ 55.99 USD
    Free Shipping on orders $49 and up
    Starting at $ 55.99 USD
    Free Shipping on orders $49 and up
    These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

    The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster
    Show More Show Less


    Revshift - Corporate Logo
    T#:582007
    Part#: PSBE36GREEN
    Ships in 3 Business Days
    $ 159.99 USD
    Free Shipping
    $ 159.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
    For shocks with a standard 10mm pin diameter
    Revshift - Corporate Logo
    T#:1105924
    Part#: RSM-E6-10MM
    Ships in 1 Business Day
    $ 99.99 USD
    Free Shipping
    $ 99.99 USD
    Free Shipping
    Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340289
    Part#: TMS11957
    In Stock
    Sale - Save 10% $ 166.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 149.83 USD
    Free Shipping
    Sale - Save 10%
    $ 166.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 149.83 USD
    Free Shipping
    New mounts should be installed whenever you are replacing the struts and shocks on your E90 and E92 3-series. The mounts keep the cabin isolated from annoying noises and impacts. Just like any other rubber mount, these will go bad over time, which allows more harshness and vibration to the chassis along with clunking noises. Replace them now to avoid doubling the labor charges down the road. When installing new shocks, that is the perfect time to also replace the mounts. There are no special tools required and don't take any extra time!

    Included in the Xi Mount Kit:
  • front upper strut mounts (also known as a guide support), 31336775097 or 31306785962
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!! Select the kit that fits the production date of your car below.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
    2006-2011 E91 BMW 325xi 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe
  • Show More Show Less

    Rear Differential Mount - Front Position
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594515
    Part#: 33316792873
    In Stock at Vendor
    $ 41.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 39.99 USD
    Free Shipping on orders $49 and up
    $ 39.99 USD
    Free Shipping on orders $49 and up
    Over time bushings deteriorate and become ineffective. Replace them to reduce noise and harshness. Priced Each. Two required for complete service.

    Revshift - Corporate Logo
    T#:582005
    Part#: PTABE6GREEN
    Ships in 1 Business Day
    $ 79.99 USD
    Free Shipping
    $ 79.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Meyle Rear Subframe Bushing - E39
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579247
    Part#: 3003331104
    Ships on Dec 1, 2026
    $ 24.99 USD
    Free Shipping on orders $49 and up
    $ 24.99 USD
    Free Shipping on orders $49 and up
    Used on all four corners of rear subframe.

    Revshift - Corporate Logo
    T#:582006
    Part#: PTABE30GREEN
    In Stock
    $ 79.99 USD
    Free Shipping
    $ 79.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Dinan - Corporate Logo
    T#:598376
    Part#: D280-0022
    Ships on Oct 22, 2026
    11% off MSRP $ 479.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 425.99 USD
    Free Shipping
    11% off MSRP
    $ 479.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 425.99 USD
    Free Shipping
    An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness. Reduces brake shimmy. Nylon-lined bearings for quiet operation. Machined aluminum housings. Sealed bearings.
    Show More Show Less

    URO Differential Cover for E46 M3
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    URO - Corporate Logo
    T#:37993429
    Part#: 33112282482
    In Stock
    $ 241.99 USD
    Free Shipping on orders $49 and up
    Differential bushing failure is a common weak point of the E46 M3. Bushings are not sold separately, you will need the whole rear cover.

    Revshift - Corporate Logo
    T#:582008
    Part#: PSBE36BLACK
    Ships in 2 Business Days
    $ 159.99 USD
    Free Shipping
    $ 159.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Revshift - Corporate Logo
    T#:1105909
    Part#: RBK-E3095A
    Ships in 5 Business Days
    $ 199.99 USD
    Free Shipping
    $ 199.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Meyle Front Control Arm Bracket - E30 E36 Z3
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:178014
    Part#: 31121136532MY
    Ships on Dec 1, 2026
    $ 42.99 USD
    Free Shipping on orders $49 and up
    Restore precise steering feel and eliminate unwanted noise. This Meyle bracket includes pre-pressed bushings for a straightforward installation, directly replacing worn components.


    Packaged by Turner - Corporate Logo
    T#:343068
    Part#: TSU9995PB3KT
    In Stock
    Sale - Save 18% $ 117.99

    This product was last offered at the strikethrough price on
    03-17-2026

    $ 97.30 USD
    Free Shipping
    Sale - Save 18%
    $ 117.99

    This product was last offered at the strikethrough price on
    03-17-2026

    $ 97.30 USD
    Free Shipping
    Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.
    Show More Show Less
    Meyle - Corporate Logo
    T#:178013
    Part#: 31121136531MY
    Ships on Dec 1, 2026
    $ 42.99 USD
    Free Shipping on orders $49 and up
    Restore precise front-end feel and handling with this Meyle HD Front Left Control Arm Bushing and Bracket assembly. Engineered for durability, it includes the bracket and mounting hardware for a straightforward, performance-oriented replacement.
    Show More Show Less
    Rear Subframe Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:599854
    Part#: 33316758259
    In Stock
    $ 47.99

    This product was last offered at the strikethrough price on
    03-23-2026

    $ 36.99 USD
    Free Shipping on orders $49 and up
    $ 36.99 USD
    Free Shipping on orders $49 and up
    The rear subframe bushings are vital to the performance and handling of your vehicle. Transfer of load and strain in the drivetrain and rear suspension rely on the subframe to do their job effectively. If the subframe bushings are worn, the transfer of power to the ground can be greatly compromised.
    Show More Show Less

    Front Upper Strut Mount - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:10128436
    Part#: 31306785962
    In Stock at Vendor
    $ 87.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 85.99 USD
    Free Shipping on orders $49 and up
    $ 85.99 USD
    Free Shipping on orders $49 and up
    Replace your worn-out mounts whenever servicing your suspension to maintain comfort and performance.

    Rear Axle Carrier Mount - Priced Each
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    URO - Corporate Logo
    T#:597133
    Part#: 33333428100
    Ships in 1 Business Day
    $ 110.00 USD
    Free Shipping
    $ 110.00 USD
    Free Shipping
    Differential Bushing - Priced Each
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    URO - Corporate Logo
    T#:641882
    Part#: 33171134871
    Ships in 1 Business Day
    $ 27.99 USD
    Free Shipping on orders $49 and up

    Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
    For shocks with a larger 12mm pin diameter
    Revshift - Corporate Logo
    T#:1105925
    Part#: RSM-E6-12MM
    Ships in 2 Business Days
    $ 99.99 USD
    Free Shipping
    $ 99.99 USD
    Free Shipping
    Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.
    Show More Show Less
    URO Rear Shock Mount
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    URO - Corporate Logo
    T#:7276182
    Part#: 33526773669
    Ships in 1 Business Day
    $ 37.99 USD
    Free Shipping on orders $49 and up
    Common failure component producing an audible clunk over bumps. Recommended to be replaced with shock replacement, or as failure is indicated. Priced each, fits left or right sides. Replace in pairs for best results.
    Show More Show Less

    Revshift - Corporate Logo
    T#:582015
    Part#: PCABE30BLACK
    Ships in 1 Business Day
    $ 49.99 USD
    Free Shipping on orders $49 and up
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less

    Revshift - Corporate Logo
    T#:1105899
    Part#: FBK-E36C95A
    Ships in 5 Business Days
    $ 379.99 USD
    Free Shipping
    $ 379.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Front Strut Mount - Priced Each
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    URO - Corporate Logo
    T#:584490
    Part#: 33506787178
    Ships in 1 Business Day
    $ 29.99 USD
    Free Shipping on orders $49 and up
    Revshift - Corporate Logo
    T#:1105916
    Part#: PSB-E3095A
    Ships in 7 Business Days
    $ 89.99 USD
    Free Shipping
    $ 89.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less


    Upper Strut Mount / Bearing - 2002, 2002tii, E21 320i
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:359655
    Part#: 31331110195
    Ships on Sep 22, 2026
    $ 40.99 USD
    Free Shipping on orders $49 and up
    This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber and it can shorten the life of your shocks.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338064
    Part#: 31129069035
    Ships on Jan 14, 2027
    Starting at $ 46.99 USD
    Free Shipping on orders $49 and up
    Starting at $ 46.99 USD
    Free Shipping on orders $49 and up
    Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

    These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

    For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1996-1999 E36 BMW M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
    Show More Show Less
    Meyle Front Inner Ball Joint - E30
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:592190
    Part#: 31121126253
    Ships on Dec 1, 2026
    $ 20.99 USD
    Free Shipping on orders $49 and up
    Front lower ball joint from control arm to lower sub frame

    Meyle Rear Upper Strut/Shock Mount - E60 E63 E65 E66
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579352
    Part#: 3147410000
    Ships on Dec 1, 2026
    $ 32.99 USD
    Free Shipping on orders $49 and up

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high-quality Meyle replacement to ensure a tight, noise-free ride.

    As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less

    Meyle Front Strut Mount - E46 E60 E61 E63 E64 E82 E83 E88
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:367404
    Part#: 31336752735
    Ships on Dec 1, 2026
    $ 34.99 USD
    Free Shipping on orders $49 and up
    $ 34.99 USD
    Free Shipping on orders $49 and up
    Direct replacement strut mount with integrated bearing for precise steering feel.
    Meyle Rear Upper Shock Mount - BMW F22/23 F3X F48 F39
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:8677200
    Part#: 33506791706
    Back Ordered
    $ 34.99 USD
    Free Shipping on orders $49 and up
    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a Genuine BMW replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
    Show More Show Less

    Front Upper Strut Mount - 5 Bolt
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:36201619
    Part#: 31306881929
    Back Ordered
    $ 84.99 USD
    Free Shipping on orders $49 and up
    One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks. To get the most out of your new suspension setup, it's recommended that you replace all parts that are known to fail. Not only will this make your new setup more effective, it will provide a better ride, proper tire position, and make all of your parts last longer.
    Show More Show Less
    Upper Strut Mount - Priced Each
    We Price Match - Give Us A Call or Chat!
    Ina - Corporate Logo
    T#:14155796
    Part#: 31 331110195
    Back Ordered
    $ 25.99 USD
    Free Shipping on orders $49 and up

    Genuine BMW Motorsport - Corporate Logo
    T#:12076
    Part#: E9X-GPN-SUBFRAME
    In Stock
    $ 800.00 USD
    Free Shipping
    $ 800.00 USD
    Free Shipping
    The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

    These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

    Price is for the set of 4 mounts.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554760
    Part#: E9XXISIKT
    In Stock
    Sale - Save 3% $ 373.99

    This product was last offered at the strikethrough price on
    07-16-2026

    $ 363.07 USD
    Free Shipping
    Sale - Save 3%
    $ 373.99

    This product was last offered at the strikethrough price on
    07-16-2026

    $ 363.07 USD
    Free Shipping

    Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs. 

    This item fits the following BMWs: 
    2006-2012 E9X BMW All xi models - 325xi 328xi 330xi 335xi

    Show More Show Less
    Rear Differential Bushing - Priced Each
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    URO - Corporate Logo
    T#:385088
    Part#: 33171090950
    Ships in 1 Business Day
    $ 60.99

    This product was last offered at the strikethrough price on
    01-23-2026

    $ 50.99 USD
    Free Shipping on orders $49 and up
    $ 50.99 USD
    Free Shipping on orders $49 and up
    Packaged by Turner - Corporate Logo
    T#:11978
    Part#: TMS11978
    Ships in 1 day
    $ 200.88

    This product was last offered at the strikethrough price on
    07-09-2026

    $ 195.16 USD
    Free Shipping
    $ 195.16 USD
    Free Shipping
    Some E34 5 series came equipped with self leveling suspension to provide a stable ride height when carrying extra passengers. While it helped to improve ride quality it is not always the best for performance, and the self leveling system parts can be very expensive to replace. Our self leveling delete kit provides all the parts required to convert your E34 sedan to a standard type suspension. Shocks and Springs are sold separately. We recommend Bilstein Shocks and H&R springs for improved performance.

    Kit includes:
    2 - 33521132270 - Rear Shock Mount / Guide Support
    2 - 33531133671 - Spring Pad Lower
    2 - 33521136063 - Support
    2 - 33531133670 - Spring Pad Upper
    4 - 33521129565 - Washer
    2 - 33531135624 - Additional Shock Absorber (bump stop)
    2 - 31331134314 - Shock Protection Tube
    2 - 34326757282 - Intermediate Piece


    This item fits the following BMWs:
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1991-1995 E34 BMW 525i 530i - Wagon - Factory Euro Non-Leveling Springs Recommended.
    Show More Show Less