• Reinforces the Mini Cooper chassis for better performance
• Reduces fore and aft, and side-to-side chassis flex
• Enhances steering response and overall handling
• Constructed with 6061-T6 aluminum mounting pads for durability
• Utilizes long-reach nuts for secure attachment to mounts studs
• Features machined pockets for upper strut bearing locator pin concealment
• Equipped with twin mounting bolts on each side for increased effectiveness
• Compatible with NM's Hi-Flow Induction Kit and factory airbox

Enhance your BMW’s performance and style with this unbeatable combo! The Turner Motorsport Carbon Fiber Strut Brace and Engine Cover are the ultimate pair to upgrade chassis stability and engine bay aesthetics—all with a single purchase.

G20/G42 Carbon Fiber Strut Brace

For G20 and G42 BMW models equipped with the B48 or B58 engines, the driving thrill is undeniable. Yet, these cars lack a crucial component found in high-performance M models: structural chassis bracing. With Turner Motorsport’s 3-point Carbon Fiber Strut Brace, you’re adding the missing link to your BMW, mirroring the handling stability of an M3 or M4. This is the only strut brace that elevates G20/G42 handling by emulating the stiffness of an M-series chassis, giving you a dynamic edge on both road and track.

The strut brace fits seamlessly into your BMW using the original factory hardware and an included stud kit, offering a hassle-free, direct installation with no modifications required. Designed and tested in-house by Turner Motorsport, this brace reduces chassis flex, enhancing control during spirited driving and providing a tighter, more responsive feel. Constructed from high-strength carbon fiber with billet aluminum end brackets, this strut brace boosts performance while adding an eye-catching focal point to your engine bay.

Strut Brace Features:

Enhanced Chassis Rigidity: Reduces flex by linking the strut towers, promoting a more precise steering response. Street and Track Ready: Engineered for the best of both worlds, offering stability in all driving conditions. Premium Carbon Fiber & Billet Aluminum: Lightweight yet highly rigid, with a stunning woven 2x2 twill finish. Easy Installation: Fits perfectly with stock mounting points using supplied hardware, ensuring a hassle-free setup. Carbon Fiber: Performance & Style

Turner’s strut brace uses structural carbon fiber, designed to endure the rigors of aggressive driving without compromising aesthetics. The brace's distinct, gloss-finished carbon fiber weave adds a sophisticated, high-performance look akin to exotic supercars. Engineered for precision, this brace effectively distributes cornering forces between the strut towers, minimizing chassis distortion and maintaining optimal wheel alignment, even in hard turns.

Turner Motorsport G-Chassis Carbon Fiber Engine Cover for B58 Engines

Give your G-Chassis BMW’s engine bay a polished, refined look with Turner’s Carbon Fiber Engine Cover. This direct replacement cover is crafted from hand-laid, gloss-finished carbon fiber, delivering a resilient, UV-protected finish. With an OE-style indentation for the BMW badge, this cover complements your engine bay with a sleek, factory look that stands out.

Engine Cover Highlights:

Direct Fitment: Seamlessly replaces the stock cover, utilizing factory mounting grommets and hardware. Durable Gloss Finish: Ensures long-lasting shine and UV protection. Distinctive Style: A premium upgrade that elevates the aesthetic of your B58 engine. Installation Notes:

Simply transfer the OE grommets and badge from the stock cover to the carbon fiber engine cover for a perfect fit—installation takes seconds!

This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.

Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Reinforce your MINI Cooper's chassis and elevate its performance with NM Engineering's Upper Tie-Bar. This innovative solution effectively reduces fore and aft, as well as side-to-side chassis flex during spirited driving, resulting in improved geometry and alignment. The outcome is enhanced steering response and superior handling.

Compatible with ALL Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T models, this NM Engineering bar is built for excellence. Its mounting bases and tube ends are meticulously machined from solid 6061-T6 aluminum billets, offering a robust alternative to cheap welded sheet metal components. Crafted from 1" round 6061-T6 aluminum tubing with a 1/4" thick wall, this bar strikes the perfect balance between stiffness and weight. Unlike single-bolt designs, NM Engineering's solution utilizes two bolts to firmly secure the tube end to the mounting base, preventing pivoting and skewing.

Key Features:

• Reinforces MINI Cooper chassis
• Reduces chassis flex for improved steering and handling
• Compatible with ALL Gen 3 MINI Coopers
• Precision-machined from solid 6061-T6 aluminum
• 1" round 6061-T6 aluminum tubing with 1/4" thick wall
• Dual-bolt design for secure tube end attachment
• Works with or without DDC factory suspension option

Upgrade Your Mini Cooper S with AEM-29-0005 Performance Strut Bar

Experience enhanced vehicle stability with the AEM-29-0005 performance strut bar, designed to complement Mini Cooper S models equipped with the AEM 21-699C or 21-721C cold air intake. AEM's strut bars are engineered to provide exceptional performance and a sleek appearance under your vehicle's hood.

Key Features:

• Specifically designed to fit with the AEM 21-699C or 21-721C cold air intake
• Constructed from 1-1/2 inch steel tubing, combining strength and low weight for a true racing experience
• Charcoal gray powder coat finish with the AEM logo for a clean, high-performance look
• Easy installation using existing factory mounting points
• Backed by AEM's Lifetime Limited Warranty
• Effectively reduces noise, vibration, and harshness, even in extreme conditions

Choose the AEM-29-0005 performance strut bar for a professional alternative that enhances both form and function.

M7 Tuning J-Brace for R56 MINI Coopers

Elevate your Mini's performance with the M7 Tuning J-Brace, specially designed for R56 MINI Coopers equipped with the factory John Cooper Works intake. This brace enhances front-end stiffness, protects strut towers from mushrooming, and adds a stylish touch to your vehicle.

• Improves handling and stability
• Protects strut towers from damage
• Enhances the aesthetic appeal of your Mini
• Easy installation process
• Made from high-strength 6061-T6 aluminum alloy for durability

Note: The J-Brace has been slightly modified for the 2011-2013 model year MINI Cooper S for better clearance to stock parts. This brace does not fit the base model Cooper (non 'S' model) or the JCW GP2 model.

Experience heightened MINI Cooper performance with the M7 Tuning Stage III Bundle, combining three cutting-edge suspension components to optimize your vehicle's capabilities. This package includes the M7 Strut Tower Brace Kit, the exclusive Under Strut System (USS), and the M7 Rear Chassis Brace, meticulously designed for MINI Cooper models.

Benefits:

• Significant cost savings, saving $249 compared to individual purchases
• Enhanced chassis stiffness for improved handling and grip
• Reduced body roll during aggressive driving and emergency maneuvers
• Easy installation with proven performance
• Increased steering response and grip, minimizing understeer

Enhance your Mini's performance with the MINI R60 R61 M7 R60 R61 Rally Sport Suspension Kit - Stage 1. This Stage 1 suspension kit from M7 is designed to deliver improved handling and stability for an exhilarating driving experience.

• Specifically designed for MINI R60 and R61 models
• Provides enhanced handling and cornering performance
• Reduces body roll for better stability during aggressive driving
• Improves overall ride quality and comfort