Ignition Service

High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

High performance ignition kit for your N20 featuring Brisk 1 step colder spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

MINI R52 R53 W11 1.6L Brisk Silver Racing DR12S Spark Plug - Set Of Four

The MINI R52 R53 W11 1.6L Brisk Silver Racing DR12S Spark Plug - Set Of Four is designed to deliver exceptional performance for high-powered and racing engines. Leveraging advanced silver spark plug technology, these spark plugs enhance ignition efficiency and overall engine performance. Silver is a superior conductor of electricity and heat compared to other materials like platinum and iridium, making it the ideal choice for those seeking maximum engine power and efficiency.

• Superior Conduction: Silver conducts 560% more electricity and 481% more heat than platinum, and 276% more electricity and 177% more heat than iridium.
• Enhanced Ignition: Provides a more powerful spark for better combustion, increasing engine horsepower.
• Improved Combustion Efficiency: Ensures complete combustion of fuel and air for optimal engine performance.
• Versatile Application: Ideal for race engines, supercharged or turbocharged setups, and engines with hard-to-ignite fuels.
• Reliable Performance: Good resistance to fouling, easier starts, and suitable for both stock and modified vehicles.

These spark plugs are an excellent upgrade for any MINI R52 or R53 model, enhancing both daily driving and racing applications.

High-performance ignition kit for your M240 featuring spark plugs, Turner high-performance ignition coils, and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that gives your engine the performance and aesthetic you're looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engine's health, performance, and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

By the early 1990s, BMW had phased out its canister-style ignition coil in favor of an individual coil-on-plug system. The venerable M50 was one of the first engines to receive this update, which boasts greater overall efficiency through increased ignition control and spark energy. Unfortunately, over two decades later, the ignition coils used on the M50, M52, S50, and S52 engines are antiquated at best. Our team of engineers and BMW enthusiasts realized the need for an ignition system upgrade and set out to modernize the M5X ignition system with performance ignition coils pulled from the B58 parts bin.

WHY UPGRADE?

B58 ignition coils provide up to 2.5 times more spark energy than OE M5X ignition coils, effectively eliminating misfires even on high-performance setups. Whether your vehicle is heavily modified or completely stock, these ignition coils deliver unparalleled performance with zero downsides! For tuners, the Turner Motorsport kit also allows for precise adjustments to ignition dwell time through standalone engine management, giving you complete control over your engine’s performance.

Our kit utilizes the factory mounting locations and includes a proprietary boot design with a built-in 1k OHM resistor. Unlike many aftermarket options, our design prevents electrical contact springs from burning out, ensuring long-term reliability and durability. The included ignition coil bracket and cover plate are manufactured from durable 5052 aluminum, combining rugged durability with a premium aesthetic. Designed and optimized in-house using cutting-edge 3D scanning hardware and CAD software, our kit ensures a perfect fit and a clean, factory-like appearance. Installation is a breeze with the included adapter harness, allowing you to add modern ignition coils to your M5X with ease!

Eliminate misfires and unleash the full potential of your M5X-equipped BMW with our industry-leading B58 ignition coil upgrade. Designed for easy installation and unparalleled reliability, it’s the ultimate plug-and-play solution for performance enthusiasts.

FEATURES:

B58 ignition coils offer upwards of 2.5x more spark energy than the OE M5X ignition coils Eliminates common ignition system defects - no more chasing misfires or swapping around coil packs! The included brackets, cover plates, wiring harness adapters, and proprietary boots make for an easy installation Confirmed functionality with factory M3.3.1 (OBDI) and MS41 (OBDII) DME software PART DESIGN:

Bolt-on ignition coil brackets are manufactured from 5052 aluminum and feature a black anodized coating for superior durability, ensuring a lasting finish 5052 brushed aluminum cover plates ensure a cohesive, OEM+ aesthetic Utilizes factory ignition coil mounting locations and corresponding hardware for easy installation Our proprietary rubber boot design incorporates the factory B58 1K OHM resistor, preventing the electrical contact failure commonly associated with other aftermarket kits Coil adapter harnesses feature durable Weatherpack connectors, safeguarding each wire from exposure to water Compact design allows for retaining the factory beauty cover and/or clearance with aftermarket top-mount turbocharger kits KIT CONTENTS:

Turner Motorsport B Series Ignition Coils for M50, M52, S50, and S52 (6) Turner Motorsport B58 Ignition Coil Conversion Wiring Harnesses (6) Turner Motorsport B58 Ignition Coil Conversion Brackets & Cover Plates (6) Optional Selections: Spark Plugs: NGK BKR6EQUP (OEM), Bosch FGR7DQP (OEM), BMW 12120037607 (Genuine) Spark Plug Socket: Schwaben Extended 5/8" (16mm) Magnetic Spark Plug Socket, Bavarian Autosport 12" x 5/8" Spark Plug Socket INSTALLATION & SUPPORT:

Need installation tips? Our R&D team has assembled a full, start-to-finish installation tutorial, including detailed removal instructions and high-definition images! See the Installation PDF under the "INSTALLATION" tab for more information.

BMW N62 4.4L Performance Ignition Service Kit provides everything needed to service your ignition system effectively. This comprehensive kit features high-quality red Dinan performance ignition coils that enhance your vehicle's performance and reliability.

• Includes all essential components for a complete ignition service
• Features Dinan performance ignition coils for improved power and efficiency
• Enhances engine responsiveness and throttle response
• Easy installation, ensuring a hassle-free upgrade for DIY enthusiasts
• Designed specifically for BMW N62 4.4L engines for a perfect fit

Upgrade your ignition system with the BMW N62 4.4L Performance Ignition Service Kit to experience enhanced performance and reliability.

B48 Muffler Delete - F30/F31/F32/F33/F36:

Arguably THE BEST modification for your N20/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of N20/B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your f chassis. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!

The ECS muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!

YoutTube Sound Clips Featured HERE:

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!) Tip adjustment capability ​ Slide farther on for left and right adjustment Rotate for verticle adjustment Good looking and durable 304 stainless steel construction Heavy-duty fabricated sheet metal exhaust hangers Dual staggered tip exhaust tips (integrated) Installation and Support:

Installation is as easy as cutting, placing into position, and clamping! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Exhaust pipe cutter - T385451 - CLICK HERE FOR INSTALLATION INSTRUCTIONS -

High-Performance Ignition Service Kit - Gen 1 B48/46 2.0L:

High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils

Upgrade your Mini's engine performance with Brisk Silver Racing Spark Plugs, the ultimate solution for high-performance and racing engines. These spark plugs are crafted with silver, offering unmatched electrical conductivity and heat transfer compared to other metals like platinum and iridium. Experience superior ignition ability, increased engine power, and lower required ignition voltage with Brisk Silver Racing Spark Plugs. They're ideal for race engines, supercharged, turbocharged, or nitrous engines, as well as vehicles with hard-to-ignite fuels. Enjoy easier starts, resistance to fouling, and optimal combustion efficiency for horsepower gains. Whether your Mini is stock or modified, these spark plugs are an excellent choice to enhance performance.

• Crafted with silver for superior electrical conductivity and heat transfer
• Provides the most powerful spark for complete combustion
• Increases engine power and efficiency
• Ideal for race engines and engines with hard-to-ignite fuels
• Suitable for supercharged, turbocharged, or nitrous engines
• Resistant to fouling and ensures easier starts
• Compatible with total loss ignition systems
• Suitable for all vehicles, including high-mileage and those with oil consumption issues