The BMS JB4 FSB Water/Methanol Injection (WMI) controller allows the JB4 to control your WMI pump and solenoid for dynamic progressive flow mapping. It also allows the JB4 to monitor pump current to overlay it with CANbus feedback for tuning parameters such as fuel trims and fuel pressure to provide a comprehensive flow-based safety system.
Show More Show Less
This plug and play tuner attaches to sensors in the engine bay and works with your factory DME tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. Stage1 gains on the N63 are up to 40whp range on pump gas and up to 60whp range with the n63tu motor. With exhaust modifications and/or on racing fuels even higher power levels are possible. Don't pay 10x more for functionally identical piggyback systems or flash tunes that claim more power but put down slower times at the track. Made in USA.
Show More Show Less
The BMS FPC provides a convenient and reliable way to control your second or third low pressure fuel pump. Inside the billet aluminum enclosure are two dials. One to set the start voltage and another to set the full flow voltage. The pump will turn on at the start voltage and go to 100% duty cycle (full flow) at the maximum voltage. The 0-5v reference can be attached to a factory manifold pressure sensor or any other 0-5v sensor you want to use as a trigger. Wiring Diagram: Black: Ground Red: 12v (preferably switched) Yellow: Output to pump (up to 30 amps) Blue: Reference 0-5v Made in USA.
Show More Show Less
This solid vibration-free mount is a great alternative to unreliable suction cups or double-stick tape mounts. Safely mounts your GoPro® camera in your front or rear Mini Cooper tow hook mounting areas. This mount keeps your GoPro® camera on your Mini and off the street or track. Constructed in the USA of CNC-machined billet aluminum and is anodized black for protection and reduced glare. GoPro® camera and accessories not included. Compatible with GoPro® HD Hero 1/2/3/3+/4/5/6/7/8/9/10/11/12 See below for fitment exact vehicle fitment.
Show More Show Less
Single 5 GPH (315 ml/min) nozzle. With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.
Show More Show Less
