Verus Engineering BMW Exterior Trim, Body Parts, Aero and Styling

Carbon Dive Plane (Canard) Kit - G87 BMW M2

T#:27405470

Part#: A0539A

Ships in 3 Business Days

$ 573.99 USD

Add to Wish List

Qty

$ 573.99 USD

Add to Wish List

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward. Dive planes, when designed properly, improve downforce on the units themselves as well as improving wheel well evacuation which is what Verus Engineering focuses on in their development. By manipulating the flow around the vehicle, Verus Engineering is able to improve vehicle performance. Utilizing state-of-the-art analysis software during the R&D process, Verus Engineering was able to extract more performance for the given build volume; increasing downforce generated from the dive planes. This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser. FEATURES Reduce Lift (Increase Downforce) Shift Aero Balance Forward Allows for Fine Tuning of Aero Balancing (Forward Biased) Help Seal Sides of Car Evacuate Air From the Front of the Wheel Well SPECS CFD Optimized Design Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition 3M Double-Sided Tape or Bolt-On Install Template for Install Included INCLUDED Lower Dive Plane, Right-Hand (1) Lower Dive Plane, Left-Hand (1) Upper Dive Plane, Right-Hand (1) Upper Dive Plane, Left-Hand (1) 3M VHB Double Sided Tape, Cut to Dive Plane Shape (4) Template (2) Hardware Kit, Includes All Necessary Hardware for Install

Show More Show Less

Replacement Jack Pad Set - BMW G-Series - Black

T#:28836366

Part#: A0623A-BLK

Ships on Oct 7, 2026

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

The factory plastic jack pads are easily ruined and damaged during maintenance or tire changes at the track. Verus developed these units to completely replace the factory units with a solid chunk of aluminum to ensure this never happens again. The jack pads install with ease in under 30 minutes and with no permanent modifications to the vehicle. The units feature an o-ring groove to keep water and debris out of the frame. The jack stand pads are anodized three popular colors, with red and blue standing out to ensure technicians, shops, and friends jack up the car from the correct locations. The units are machined, anodized, and laser engraved in the USA.

Show More Show Less

Dive Plane (Canard) Kit - BMW E9X M3

T#:27405483

Part#: A0203A

Special Order: No Guaranteed ETA

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving a front splitter further forward. Verus Engineering developed the dive plane based on past knowledge and scan data obtained directly from an M3 for unparalleled fit and finish. This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser. FEATURES Reduce Lift (Increase Downforce) Shift Aero Balance Forward Allows for Fine Tuning of Aero Balancing (Forward Biased) Help Seal Sides of Car Evacuate Air From the Front of the Wheel Well SPECIFICATIONS CFD Optimized Design Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition 3M Double-Sided Tape or Bolt-On Install Stainless Hardware Used Throughout Template for Install Included INCLUDED Dive Plane, Right-Hand Dive Plane, Left-Hand 3M VHB Double Sided Tape, Cut to Dive Plane Shape (2) Paper Template Hardware Kit, Includes All Necessary Hardware for Install

Show More Show Less

Replacement Jack Pad Set - BMW G-Series - Blue

T#:28836367

Part#: A0623A-BLU

Special Order: No Guaranteed ETA

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

The factory plastic jack pads are easily ruined and damaged during maintenance or tire changes at the track. Verus developed these units to completely replace the factory units with a solid chunk of aluminum to ensure this never happens again. The jack pads install with ease in under 30 minutes and with no permanent modifications to the vehicle. The units feature an o-ring groove to keep water and debris out of the frame. The jack stand pads are anodized three popular colors, with red and blue standing out to ensure technicians, shops, and friends jack up the car from the correct locations. The units are machined, anodized, and laser engraved in the USA.

Show More Show Less

Replacement Jack Pad Set - BMW G-Series - Red

T#:28836368

Part#: A0623A-RED

Special Order: No Guaranteed ETA

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

The factory plastic jack pads are easily ruined and damaged during maintenance or tire changes at the track. Verus developed these units to completely replace the factory units with a solid chunk of aluminum to ensure this never happens again. The jack pads install with ease in under 30 minutes and with no permanent modifications to the vehicle. The units feature an o-ring groove to keep water and debris out of the frame. The jack stand pads are anodized three popular colors, with red and blue standing out to ensure technicians, shops, and friends jack up the car from the correct locations. The units are machined, anodized, and laser engraved in the USA.

Show More Show Less

Carbon Fiber Hood Louver Kit - G87 BMW M2

T#:27405469

Part#: A0534A

Back Ordered

$ 589.99 USD

Add to Wish List

Qty

$ 589.99 USD

Add to Wish List

The Verus Engineering Carbon Hood Louver Kit for G87 BMW M2 helps reduce engine bay heat and pressure. The louver improves cooling stack efficiency, under hood component longevity, and adds a bump in the front end downforce by alleviating air pressure in the engine bay. Using scan data, Verus Engineering developed the hood louver to have an OEM-type fit and finish to the hood's contour. Verus Engineering took special care to ensure the louver was placed in an area that removed *minimal* under hood structure as well as in an area of low pressure for maximum evacuation. Through CFD and on-track data, Verus Engineering found the louvers to work very well on the car, dramatically reducing under-hood temperatures and improving aero balance. FEATURES Retains OEM Hood's Structural Integrity Reduce Under Hood Pressure and Temperature CFD Optimized Design Scan Data Used for OEM Fit and Finish OEM-Plus Appearance and Install Cut-Out Template Included SPECIFICATIONS Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition Paper Cut Template 3M VHB Double Sided Tape INCLUDED Carbon Hood Louver Cut Template Small White Verus Vinyl Sticker 3M VHB Double-Sided Tape, Specifically Cut To Louver Shape

Show More Show Less

Replacement Jack Pad / Jack Puck - Toyota Supra (Blue)

T#:49752798

Part#: A0510A-BLU

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Replace faulty or broken jack pads with these re-engineered jack pads from Verus Engineering.

Replacement Jack Pad / Jack Puck - Toyota Supra (Black)

T#:49752797

Part#: A0510A-BLK

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Replace faulty or broken jack pads with these re-engineered jack pads from Verus Engineering.

Verus Engineering Front Splitter Endplates - G87 BMW M2

T#:38452844

Part#: A0613AG87

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Verus Engineering Front Splitter Endplates - G87 BMW M2 Maximize the aerodynamic performance of your G87 BMW M2 with the Verus Engineering Front Splitter Endplates, engineered to refine airflow and improve front-end stability. Designed to complement the Verus Engineering Front Splitter, these endplates help manage high-pressure airflow, reducing front-end lift and optimizing downforce balance. Constructed from lightweight yet durable carbon composite, these endplates not only enhance aerodynamic efficiency but also add a race-inspired aesthetic to your M2. Whether you're attacking corners on the track or carving through backroads, these endplates provide an edge in both form and function. Features & Benefits: ✔ Enhanced Aerodynamics – Directs airflow around the front wheels for improved stability ✔ Track-Tested Performance – Reduces high-pressure air bleed-off, increasing front downforce ✔ Premium Materials – Lightweight carbon composite for strength and durability ✔ Seamless Fit – Designed to integrate perfectly with the Verus Engineering Splitter ✔ Aggressive Styling – Adds a motorsport-inspired look to your M2 Take your G87 M2’s aerodynamics to the next level with Verus Engineering Front Splitter Endplates—where performance meets precision.

Show More Show Less

Replacement Jack Pad / Jack Puck - Toyota Supra (Red)

T#:49752799

Part#: A0510A-RED

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Replace faulty or broken jack pads with these re-engineered jack pads from Verus Engineering.

Project Cars

SELECT YOUR BMW

Verus Engineering BMW Exterior Trim, Body Parts, Aero and Styling

Sub-Categories

Carbon Dive Plane (Canard) Kit - G87 BMW M2

Replacement Jack Pad Set - BMW G-Series - Black

Dive Plane (Canard) Kit - BMW E9X M3

Replacement Jack Pad Set - BMW G-Series - Blue

Replacement Jack Pad Set - BMW G-Series - Red

Carbon Fiber Hood Louver Kit - G87 BMW M2

Replacement Jack Pad / Jack Puck - Toyota Supra (Blue)

Replacement Jack Pad / Jack Puck - Toyota Supra (Black)

Verus Engineering Front Splitter Endplates - G87 BMW M2

Replacement Jack Pad / Jack Puck - Toyota Supra (Red)

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results