BMW Exterior Trim, Body Parts, Aero and Styling

Vorsteiner VRS Aero Front Grille (Carbon Fiber) - G8x M3/M4

T#:5122285

Part#: BMV3305

Ships on Oct 27, 2026

$ 1,295.00 USD

Add to Wish List

Qty

$ 1,295.00 USD

Add to Wish List

Carbon fiber body parts are starting to become a dime-a-dozen, but this has caused a reduction in part quality. Vorsteiner takes great care to ensure every carbon fiber component they produce is of the highest quality, putting every piece through an independent inspection process to look for any potential imperfections before they leave the facility. In addition, the high gloss clear coating applied to their carbon fiber parts is a UV ray inhibiting coating that won't discolor or peel after only a few years of sun exposure. Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Front Grille is designed for those looking to change their front grille over to a more aggressive option. This grille is composed of durable Carbon Fiber material which comes in a glossy finish. The wide open design allows for an increase in airflow as well. *Note that this grille is not compatible with vehicles equipped with front radars.

Show More Show Less

Vorsteiner Aero Front Grille Mesh Set - For BMV3325 with Active Cruis...

T#:33512919

Part#: BMV3025-ABS-ACC

Ships on Oct 27, 2026

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

Elevate your G8X M3/M4 with the Vorsteiner Aero Front Grille Mesh Set – expertly designed for enhanced airflow, striking style, and a commanding presence on the road.

Carbon Dive Plane (Canard) Kit - G87 BMW M2

T#:27405470

Part#: A0539A

Ships in 3 Business Days

$ 573.99 USD

Add to Wish List

Qty

$ 573.99 USD

Add to Wish List

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward. Dive planes, when designed properly, improve downforce on the units themselves as well as improving wheel well evacuation which is what Verus Engineering focuses on in their development. By manipulating the flow around the vehicle, Verus Engineering is able to improve vehicle performance. Utilizing state-of-the-art analysis software during the R&D process, Verus Engineering was able to extract more performance for the given build volume; increasing downforce generated from the dive planes. This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser. FEATURES Reduce Lift (Increase Downforce) Shift Aero Balance Forward Allows for Fine Tuning of Aero Balancing (Forward Biased) Help Seal Sides of Car Evacuate Air From the Front of the Wheel Well SPECS CFD Optimized Design Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition 3M Double-Sided Tape or Bolt-On Install Template for Install Included INCLUDED Lower Dive Plane, Right-Hand (1) Lower Dive Plane, Left-Hand (1) Upper Dive Plane, Right-Hand (1) Upper Dive Plane, Left-Hand (1) 3M VHB Double Sided Tape, Cut to Dive Plane Shape (4) Template (2) Hardware Kit, Includes All Necessary Hardware for Install

Show More Show Less

Replacement Jack Pad Set - BMW G-Series - Black

T#:28836366

Part#: A0623A-BLK

Ships on Oct 14, 2026

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

The factory plastic jack pads are easily ruined and damaged during maintenance or tire changes at the track. Verus developed these units to completely replace the factory units with a solid chunk of aluminum to ensure this never happens again. The jack pads install with ease in under 30 minutes and with no permanent modifications to the vehicle. The units feature an o-ring groove to keep water and debris out of the frame. The jack stand pads are anodized three popular colors, with red and blue standing out to ensure technicians, shops, and friends jack up the car from the correct locations. The units are machined, anodized, and laser engraved in the USA.

Show More Show Less

Dive Plane (Canard) Kit - BMW E9X M3

T#:27405483

Part#: A0203A

Special Order: No Guaranteed ETA

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving a front splitter further forward. Verus Engineering developed the dive plane based on past knowledge and scan data obtained directly from an M3 for unparalleled fit and finish. This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser. FEATURES Reduce Lift (Increase Downforce) Shift Aero Balance Forward Allows for Fine Tuning of Aero Balancing (Forward Biased) Help Seal Sides of Car Evacuate Air From the Front of the Wheel Well SPECIFICATIONS CFD Optimized Design Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition 3M Double-Sided Tape or Bolt-On Install Stainless Hardware Used Throughout Template for Install Included INCLUDED Dive Plane, Right-Hand Dive Plane, Left-Hand 3M VHB Double Sided Tape, Cut to Dive Plane Shape (2) Paper Template Hardware Kit, Includes All Necessary Hardware for Install

Show More Show Less

Replacement Jack Pad Set - BMW G-Series - Red

T#:28836368

Part#: A0623A-RED

Special Order: No Guaranteed ETA

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

The factory plastic jack pads are easily ruined and damaged during maintenance or tire changes at the track. Verus developed these units to completely replace the factory units with a solid chunk of aluminum to ensure this never happens again. The jack pads install with ease in under 30 minutes and with no permanent modifications to the vehicle. The units feature an o-ring groove to keep water and debris out of the frame. The jack stand pads are anodized three popular colors, with red and blue standing out to ensure technicians, shops, and friends jack up the car from the correct locations. The units are machined, anodized, and laser engraved in the USA.

Show More Show Less

Replacement Jack Pad Set - BMW G-Series - Blue

T#:28836367

Part#: A0623A-BLU

Special Order: No Guaranteed ETA

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

The factory plastic jack pads are easily ruined and damaged during maintenance or tire changes at the track. Verus developed these units to completely replace the factory units with a solid chunk of aluminum to ensure this never happens again. The jack pads install with ease in under 30 minutes and with no permanent modifications to the vehicle. The units feature an o-ring groove to keep water and debris out of the frame. The jack stand pads are anodized three popular colors, with red and blue standing out to ensure technicians, shops, and friends jack up the car from the correct locations. The units are machined, anodized, and laser engraved in the USA.

Show More Show Less

Carbon Fiber Hood Louver Kit - G87 BMW M2

T#:27405469

Part#: A0534A

Back Ordered

$ 589.99 USD

Add to Wish List

Qty

$ 589.99 USD

Add to Wish List

The Verus Engineering Carbon Hood Louver Kit for G87 BMW M2 helps reduce engine bay heat and pressure. The louver improves cooling stack efficiency, under hood component longevity, and adds a bump in the front end downforce by alleviating air pressure in the engine bay. Using scan data, Verus Engineering developed the hood louver to have an OEM-type fit and finish to the hood's contour. Verus Engineering took special care to ensure the louver was placed in an area that removed *minimal* under hood structure as well as in an area of low pressure for maximum evacuation. Through CFD and on-track data, Verus Engineering found the louvers to work very well on the car, dramatically reducing under-hood temperatures and improving aero balance. FEATURES Retains OEM Hood's Structural Integrity Reduce Under Hood Pressure and Temperature CFD Optimized Design Scan Data Used for OEM Fit and Finish OEM-Plus Appearance and Install Cut-Out Template Included SPECIFICATIONS Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition Paper Cut Template 3M VHB Double Sided Tape INCLUDED Carbon Hood Louver Cut Template Small White Verus Vinyl Sticker 3M VHB Double-Sided Tape, Specifically Cut To Louver Shape

Show More Show Less

Vorsteiner VRS Aero Front Grille (ABS Plastic) - G8x M3/M4

T#:5122284

Part#: BMV3325

Special Order: No Guaranteed ETA

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Front Grille is designed for those looking to change their front grille over to a more aggressive option. This grille is composed of durable ABS material which comes in a glossy black finish. The wide open design allows for an increase in airflow as well. *Note that this grille is not compatible with vehicles equipped with front radars.

Show More Show Less

VRS Aero Eyebrows On Rear Bumper - F9X M8

T#:11857197

Part#: BMV8025

Special Order: No Guaranteed ETA

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

The Vorsteiner aero kit comprises of 4 components that amplify the visual appearance, providing an upgrade to the BMW M8 platform. Amplifying the M8’s existing body lines, these eyebrows give the look that the platform deserves.

Show More Show Less

V20 Aero Limited Side Grilles - Nickel Plated

T#:38229081

Part#: BMV5695

Special Order: No Guaranteed ETA

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

In honor of our 20th anniversary, **Vorsteiner** has modernized the **V-CSL Carbon Fiber Program** for the **BMW E46 M3**, introducing the exclusive **V20 program**. This refined design features **dual acorn-shaped snorkels** integrated into the front bumper, complemented by a **redesigned one-piece front spoiler** for improved aerodynamics. The **double-sided carbon fiber hood** includes **raised left and right vents**, efficiently extracting heat from the engine bay. At the rear, the **diffuser incorporates dual diffuser elements**, enhancing airflow for superior performance. With production limited to just **103 units**, the **V20 program** pays homage to the **BMW E46 CSL’s impressive 103 horsepower per liter**. Each **V-CSL component** is meticulously crafted from **1x1 weaved pre-preg autoclaved carbon fiber** and expertly manufactured in **Vorsteiner’s California facility**, ensuring exceptional quality and precision.

Show More Show Less

Replacement Jack Pad / Jack Puck - Toyota Supra (Blue)

T#:49752798

Part#: A0510A-BLU

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Replace faulty or broken jack pads with these re-engineered jack pads from Verus Engineering.

Replacement Jack Pad / Jack Puck - Toyota Supra (Black)

T#:49752797

Part#: A0510A-BLK

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Replace faulty or broken jack pads with these re-engineered jack pads from Verus Engineering.

Replacement Jack Pad / Jack Puck - Toyota Supra (Red)

T#:49752799

Part#: A0510A-RED

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Replace faulty or broken jack pads with these re-engineered jack pads from Verus Engineering.

Verus Engineering Front Splitter Endplates - G87 BMW M2

T#:38452844

Part#: A0613AG87

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Verus Engineering Front Splitter Endplates - G87 BMW M2 Maximize the aerodynamic performance of your G87 BMW M2 with the Verus Engineering Front Splitter Endplates, engineered to refine airflow and improve front-end stability. Designed to complement the Verus Engineering Front Splitter, these endplates help manage high-pressure airflow, reducing front-end lift and optimizing downforce balance. Constructed from lightweight yet durable carbon composite, these endplates not only enhance aerodynamic efficiency but also add a race-inspired aesthetic to your M2. Whether you're attacking corners on the track or carving through backroads, these endplates provide an edge in both form and function. Features & Benefits: ✔ Enhanced Aerodynamics – Directs airflow around the front wheels for improved stability ✔ Track-Tested Performance – Reduces high-pressure air bleed-off, increasing front downforce ✔ Premium Materials – Lightweight carbon composite for strength and durability ✔ Seamless Fit – Designed to integrate perfectly with the Verus Engineering Splitter ✔ Aggressive Styling – Adds a motorsport-inspired look to your M2 Take your G87 M2’s aerodynamics to the next level with Verus Engineering Front Splitter Endplates—where performance meets precision.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exterior Trim, Body Parts, Aero and Styling

Sub-Categories

Vorsteiner VRS Aero Front Grille (Carbon Fiber) - G8x M3/M4

Vorsteiner Aero Front Grille Mesh Set - For BMV3325 with Active Cruis...

Carbon Dive Plane (Canard) Kit - G87 BMW M2

Replacement Jack Pad Set - BMW G-Series - Black

Dive Plane (Canard) Kit - BMW E9X M3

Replacement Jack Pad Set - BMW G-Series - Red

Replacement Jack Pad Set - BMW G-Series - Blue

Carbon Fiber Hood Louver Kit - G87 BMW M2

Vorsteiner VRS Aero Front Grille (ABS Plastic) - G8x M3/M4

VRS Aero Eyebrows On Rear Bumper - F9X M8

V20 Aero Limited Side Grilles - Nickel Plated

Replacement Jack Pad / Jack Puck - Toyota Supra (Blue)

Replacement Jack Pad / Jack Puck - Toyota Supra (Black)

Replacement Jack Pad / Jack Puck - Toyota Supra (Red)

Verus Engineering Front Splitter Endplates - G87 BMW M2

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results