BMW Internal Engine Parts

Race German Single Vanos Rebuild - Deluxe Kit W/Modified Socket ...

T#:6843927

Part#: RGSVNSDK-MS

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers Anti Rattle Bushing Set (1 Bushing + 2 Bearings) OEM Vanos Sealing Gasket *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit includes the modified sockets.

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Glyco Connecting Rod Bearing Set

T#:375825

Part#: 11241284849

Ships in 1 Business Day

$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 84.36 USD

Add to Wish List

Qty

$ 84.36 USD

Add to Wish List

Standard bore - 45mm

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Rod Bearing - E30 M3, E28 M5, E24 M6, E34 M5 (sold individually) ...

T#:183

Part#: 11241310515

In Stock

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

E30 M3, E28 M5, E24 M6, E34 M5 Rod Bearing. Sold individually. Standard sizing.

This item fits the following BMWs
1988-1991 BMW E30 M3 - 8 required.
1988 BMW E28 M5 - 12 required.
1989-1993 BMW E34 M5 3.6 liter - 12 required.
1987-1989 BMW E24 M6 - 12 required.

Show More Show Less

Timing Chain - Upper

T#:17871154

Part#: 11311432177

In Stock

Sale - Save 20% $ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.39 USD

Add to Wish List

Glyco "Yellow" Crankshaft Bearing Shell - Set - E28, E30, E34, E36, E...

T#:375823

Part#: 11211706847

In Stock

$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD

Add to Wish List

Qty

$ 125.04 USD

Add to Wish List

Standard bore

Race German Single Vanos Rebuild - Seal And Rattle Kit W/Modified Soc...

T#:6843925

Part#: RGSVNSSRK-MS

In Stock

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers Anti Rattle Bushing Set (1 Bushing + 2 Bearings) *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit includes the modified sockets.

Show More Show Less

Timing Component

T#:17871158

Part#: 11367583208

In Stock

Sale - Save 20% $ 199.99

This product was last offered at the strikethrough price on
05-03-2026

$ 159.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 199.99

This product was last offered at the strikethrough price on
05-03-2026

$ 159.99 USD

Add to Wish List

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Main Bearing Set - Standard Size - E30 M3 2.3 liter

T#:3166

Part#: 11210666110

Ships in 3 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

This E30 M3 Main bearing set is in standard size for the 2.3 liter S14 engine. This main bearing kit includes the thrust bearings.

This item fits the following BMWs:
1988-1991 E30 BMW M3

Show More Show Less

Genuine MINI Shaft Seal

T#:405713

Part#: 11117568264

In Stock

26% off MSRP $ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

26% off MSRP

$ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Race German Single Vanos Rebuild - Deluxe Kit

T#:6843926

Part#: RGSVNSDK

Ships in 3 Business Days

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers Anti Rattle Bushing Set (1 Bushing + 2 Bearings) OEM Vanos Sealing Gasket *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.

Show More Show Less

Genuine MINI Crankshaft Sprocket

T#:32419

Part#: 11211485402

Ships in 2 Business Days

6% off MSRP $ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 71.99 USD

Add to Wish List

Qty

6% off MSRP

$ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 71.99 USD

Add to Wish List

Genuine MINI SPROCKET
Fits BMW Engines including:
W10,W11

Genuine MINI Hub

T#:406420

Part#: 11237537697

In Stock

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

Glyco Main Bearing Set (Standard) - E21, E28, E30

Features All Single-Tang Main Bearings for Earlier M20 Engines

T#:1196183

Part#: 11211722342

In Stock

$ 259.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Qty

$ 231.99 USD

Add to Wish List

Vargas "Spline Lock" Crank Hub Solution - N54

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Glyco "Yellow" Crankshaft Bearing Shell - Set - E30, E36, E39, E46, E...

T#:375824

Part#: 11211706850

In Stock at Vendor

$ 126.61

This product was last offered at the strikethrough price on
07-15-2026

$ 118.92 USD

Add to Wish List

Qty

$ 118.92 USD

Add to Wish List

59.75MM(+0.25) bore

Race German Single Vanos Rebuild - Seal And Rattle Kit

T#:6843924

Part#: RGSVNSSRK

Ships in 4 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers Anti Rattle Bushing Set (1 Bushing + 2 Bearings) *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.

Show More Show Less

Race German Single Vanos Rebuild - Seal Kit W/Modified Socket ...

T#:6843923

Part#: RGSVNSSK-MS

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit includes the modified sockets.

Show More Show Less

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Race German Single Vanos Rebuild - Seal Kit

T#:6843922

Part#: RGSVNSSK

Ships in 1 Business Day

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Rod Bearing Set (+0.25)

T#:23748157

Part#: 112412848516CYL-

Ships in 1 Business Day

$ 331.13

This product was last offered at the strikethrough price on
07-15-2026

$ 305.57 USD

Add to Wish List

Qty

$ 305.57 USD

Add to Wish List

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

T#:19395579

Part#: VTTCRANKHUBPKG

Ships in 10 Business Days

$ 934.99 USD

Add to Wish List

Qty

$ 934.99 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

Genuine MINI Exhaust Valve

T#:407264

Part#: 11347547187

Ships in 2 Business Days

8% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Qty

8% off MSRP

$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Glyco "Green" Crankshaft Bearing Shell - Set - E39, E46, E53, E83, Z3...

T#:374671

Part#: 11211706848

Ships in 1-2 days

$ 194.32 USD

Add to Wish List

Qty

$ 194.32 USD

Add to Wish List

Standard bore

Genuine MINI Impulse Sending Wheel

T#:515028

Part#: 11227634295

In Stock

7% off MSRP $ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

Qty

7% off MSRP

$ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

Genuine MINI Crankshaft Gear

T#:510222

Part#: 11217588996

In Stock

4% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.75 USD

Add to Wish List

Qty

4% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.75 USD

Add to Wish List

Genuine MINI Camshaft Sprocket - SOHC

T#:33887

Part#: 11311485403

Ships in 2 Business Days

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

Genuine MINI SPROCKET
Fits BMW Engines including:
W10,W11

Genuine MINI Cylinder Head Bolts - Set Of 13

T#:405907

Part#: 11127560274

Ships in 2 Business Days

19% off MSRP $ 89.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.75 USD

Add to Wish List

Qty

19% off MSRP

$ 89.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.75 USD

Add to Wish List

Genuine MINI Hex Bolt With Washer

T#:29202

Part#: 07137829910

Ships in 2 Business Days

2% off MSRP $ 43.63

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.86 USD

Add to Wish List

Qty

2% off MSRP

$ 43.63

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.86 USD

Add to Wish List

Genuine MINI HEX BOLT WITH WASHER

Genuine MINI Shaft Seal

T#:405712

Part#: 11117568263

Ships in 2 Business Days

26% off MSRP $ 58.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.79 USD

Add to Wish List

Qty

26% off MSRP

$ 58.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.79 USD

Add to Wish List

Cylinder Head - N16

T#:15777325

Part#: 11122470427

Ships in 4 Business Days

6% off MSRP $ 4,526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,234.99 USD

Add to Wish List

Qty

6% off MSRP

$ 4,526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,234.99 USD

Add to Wish List

Introducing the Genuine Mini Cylinder Head (Part Number: 11122470427) for your Mini Cooper – the ultimate solution to enhance your engine's performance and reliability.

Precision-engineered to exacting standards, this cylinder head is an authentic replacement part from Genuine Mini, ensuring seamless compatibility and a perfect fit for your Mini Cooper. Crafted with the utmost attention to detail, it's designed to deliver exceptional combustion efficiency, improving power output and fuel economy.

Whether you're looking to replace a worn-out cylinder head or boost your Mini Cooper's performance, this Genuine Mini Cylinder Head is the ideal choice. Rest assured that you're investing in a top-quality component that meets the highest industry standards, backed by the reputation of Genuine Mini for excellence.

Upgrade your Mini Cooper's engine with the Genuine Mini Cylinder Head (Part Number: 11122470427) and experience the perfect balance of performance, durability, and reliability. It's time to unleash the full potential of your Mini Cooper with this authentic and high-quality component.

Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 5 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine MINI Piston W/ Rings - ( 0 Size ) Priced Each

T#:33527

Part#: 11257566019

Ships in 8 Business Days

10% off MSRP $ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD

Add to Wish List

Qty

10% off MSRP

$ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD

Add to Wish List

Genuine MINI MAHLE PISTON
Fits BMW Engines including:
N14

Bav Auto Crankshaft Position Sensor - Multiple BMWs

T#:639826

Part#: 13627525015

Special Order: No Guaranteed ETA

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Genuine Mini Hex Bolt With Washer R5X R6X - Priced Each

T#:405708

Part#: 11117540160

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Upgrade your Mini's engine with this high-quality Hex Bolt With Washer designed to attach the bottom engine crank housing to the top engine block. This essential component ensures a secure connection between engine parts, enhancing overall performance and reliability. Trust this genuine Mini part for optimal fit and function in your Mini vehicle.

Enhances engine performance
Ensures secure attachment between engine components
Genuine Mini part for optimal fit and reliability
Easy to install for quick replacement

Show More Show Less

Genuine MINI Hex Bolt With Washer - 07147543890

T#:29902

Part#: 07147543890

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Ensure the secure assembly of components in your Mini with the Genuine MINI Hex Bolt With Washer - 07147543890. This high-quality bolt and washer combination is designed specifically for Mini vehicles, providing reliability and peace of mind for various automotive applications.

Genuine OEM part ensures compatibility and fitment
High-quality construction for durability and longevity
Designed to meet Mini's specifications and standards
Ideal for various assembly and maintenance tasks in your Mini

Genuine MINI HEX BOLT WITH WASHER

Show More Show Less

BMW N52 N54 Collar Screw

T#:17871157

Part#: 11367524954

In Stock

Sale - Save 20% $ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.79 USD

Add to Wish List

Holds the camshaft gear to the camshaft, measures M10X1X94.

RECTANGRING

T#:511589

Part#: 11317587757

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Connecting Rod Bolt - Priced Each

T#:512851

Part#: 11247593922

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Elevate your Mini's engine performance with the connecting rod bolt, essential for securing the connecting rod's bottom half to the rod itself. This vital component ensures the stability and integrity of the engine's operation, providing reliability and optimal functionality.

Crucial for connecting rod stability
Ensures secure attachment of rod components
Essential for engine integrity and reliability
Optimizes engine functionality and performance

Show More Show Less

Genuine MINI Connecting Rod Bolt L=45mm - 11241485407

T#:32992

Part#: 11241485407

In Stock

14% off MSRP $ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5.99 USD

Limited Qty Sale

Add to Wish List

Qty

14% off MSRP

$ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5.99 USD

Limited Qty Sale

Add to Wish List

Genuine MINI CONNECTING ROD BOLT
Fits BMW Engines including:
W10,W11

Glyco Connecting Rod Bushing

T#:374292

Part#: 11241278209

Ships in 1 Business Day

$ 6.11 USD

Add to Wish List

Qty

$ 6.11 USD

Add to Wish List

Press fit into small journal of connecting rod

Rod Bearing Set - Standard (48.00 Mm)

T#:55821723

Part#: 11241715701

Ships in 2 Business Days

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

Glyco Connecting Rod Bushing - E12, E21, E23, E24, E28, E3, E30, E32,...

T#:187165

Part#: 11240618100

In Stock at Vendor

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

OEM BMW Connecting Rod Bush

Main Bearing Set (Standard)

T#:55857747

Part#: 11211725917

Ships in 2 Business Days

$ 90.99

This product was last offered at the strikethrough price on
07-15-2026

$ 85.99 USD

Add to Wish List

Qty

$ 85.99 USD

Add to Wish List

Genuine MINI N18 1.6L Adjustment Sprocket Unit - Outlet Cam

T#:407311

Part#: 11367536085

Ships in 2 Business Days

6% off MSRP $ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 633.99 USD

Add to Wish List

Qty

6% off MSRP

$ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 633.99 USD

Add to Wish List

Genuine MINI N18 1.6L Adjustment Sprocket Unit - Outlet Cam

Upgrade your Mini's performance with the Genuine MINI N18 1.6L Adjustment Sprocket Unit - Outlet Cam. Engineered with precision, this adjustment sprocket unit ensures precise timing for improved engine efficiency. Its durable construction and easy installation make it an ideal choice for Mini owners looking to enhance their driving experience.

Optimizes engine performance
Ensures precise timing
Durable construction
Easy installation

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Genuine MINI N18 1.6L Adjustment Sprocket Unit - Outlet Cam

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results