BMW S65 BE Bearings Connecting Rod Bearing Upgrade Set is designed to address the known flaws in the factory BMW rod bearings, particularly for the S65B40 engine. Manufactured by Clevite to BE Bearing specifications, this set provides a crucial upgrade with its enhanced materials and design, ensuring improved performance and durability.

The original BMW bearings have minimal clearance, which leads to premature wear and potential engine failure. This upgrade replaces the tin-aluminum factory bearings with a superior silver-oxide-coated tri-metal "F" series design. The new bearings can handle 30% more load, offer better performance in low oil conditions, and are more forgiving of foreign particles in the oil. Designed specifically for BMW S65 engines, these bearings provide optimal performance for high-horsepower applications.

• Designed specifically for BMW S65B40 engines
• Silver-oxide coating withstands 30% more load capacity
• Improved performance under low-oil and boundary conditions
• Stronger backing material for enhanced durability
• Corrects factory BMW rod bearing clearance issue
• Ideal for high-horsepower applications and factory 10W60 weight oils
• Complete set for 8 cylinders, ready for installation

Fits the following BMWs:

• 2008-2013 E9X BMW M3 (S65)

Designed and manufactured by Clevite to BE Bearing specifications.

These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure.  Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil.

These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating.

• Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended).
• Designed with extra clearance to "fix" the BMW rod bearing design flaw.
• Designed for use with factory 10W60 weight oils.
• Tri-Armor coated for low conditions during cold start
• Ideal for start-stop vehicles
• Applicable for BMW engines S85B50
• Standard Clearance
• Sold as complete set (10-cylinders)

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Designed by BE Bearings, manufactured by ARP.  These custom made rod bolts are designed to be used on BMW factory connecting rods.  BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion.  Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.

Technical Details:

• Composition:   ARP2000®
• Yield strength:   200,000 PSI
• Tensile strength:   220,000 PSI
• Torque specification:   50 Ft/Lbs, or 0.0065-0.0070 inch stretch

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Upgrade your Mini's engine with Sneed4Speed Forged H Beam Connecting Rods, designed for the R53 and R52 Supercharged engines, also compatible with the R50/R52 Base Engines. Crafted from 4340 forged steel, these rods are rated to handle up to 700 horsepower, making them ideal for high-power builds. Perfect for budget-conscious builders seeking reliable performance, these rods offer a direct fit and replacement solution. Backed by a 100-year warranty, they provide peace of mind and long-lasting durability. Each rod includes 180,000 psi rated chrome moly rod bolts, capable of supporting up to 1000 HP.

• Designed for R53 and R52 Supercharged engines, compatible with R50/R52 Base Engines
• Constructed from 4340 forged steel for strength and durability
• Rated to handle up to 700 horsepower for high-power builds
• Ideal for budget-conscious builders seeking reliable performance
• Direct fit and replacement for easy installation
• Backed by a 100-year warranty for long-lasting peace of mind
• Includes 180,000 psi rated chrome moly rod bolts for added strength and support

Sneed4Speed proudly presents their Forged H Beam Connecting Rods, tailored to fit R56, R55, R57, R58, R59, R60, and R61 MINIs equipped with the N14 and N18 engines. Crafted from resilient 4340 forged steel, these connecting rods are built to withstand the demands of high-performance engines, boasting a remarkable 700 horsepower rating. This makes them a superb choice for budget-conscious builders aiming to achieve significant power gains.

What sets these connecting rods apart is their direct fit and replacement design, ensuring a straightforward installation process for MINI enthusiasts. But that's not all – these rods come backed by an extraordinary 100-year warranty, providing unparalleled peace of mind to vehicle owners.

Furthermore, the kit includes high-quality chrome moly rod bolts, rated at an impressive 180,000 psi, capable of supporting up to 1000 horsepower. Elevate your MINI's performance and reliability with Sneed4Speed's Forged H Beam Connecting Rods.

URO Cold Start Valve - BMW M30 Engines - 13641358917

URO Cold Start Valve - BMW M30 Engines - 13641358917 is designed to restore proper cold start functionality in BMW vehicles equipped with the M30 engine. This high-quality replacement valve ensures smoother engine starts, especially in cold weather, by controlling the flow of fuel during startup. Manufactured to OE specifications, it offers reliable performance and long-lasting durability. The URO Cold Start Valve is an essential component to maintain optimal engine operation and avoid potential cold-start issues.

Key Benefits:

• Optimized Engine Start: Ensures smooth engine starts, especially in cold weather conditions.
• OE Replacement: Manufactured to original equipment specifications for a perfect fit and reliable performance.
• Improved Fuel Flow Control: Regulates fuel flow during startup to prevent hesitation and rough idling.
• Durable Construction: Made with high-quality materials to withstand engine heat and harsh operating conditions.
• Long-Term Reliability: Designed for durability, ensuring long-lasting function and protection against common cold-start issues.

Has your BMW's with the N62 V8 engine developed a coolant leak at the front of the engine from the timing cover weep hole? If so the it is likely that the coolant transfer pipe seal, located below the intake manifold has developed a leak. Normally, replacing the seal on this pipe would require almost 40 hours of labor and involve removing the entire engine from the car, then removing the cylinder heads, and timing covers. With this new collapsible pipe this repair can be accomplished in under 10 hours! This solution will save you or your mechanic from a bunch of headaches and get your V8 back on the road leak free!

With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time. 

video: N62 Cooling Pipe Replacement

Supplement Gasket Kit Parts List

(click to expand)

BMW p/nQtyDescription

115317100481Rear Engine Block O-ring,

115175077171Heat Pipe w O-ring

115175085351Water Pump Gasket

115114399761Valley Pan Pipe Pump

111475072781Valley Pan w Gasket

116175211812Intake Manifold Gasket

071199035962Camshaft Adjuster O-ring

123114399881Alternator Feed Pipe

750il gasket kit deletes 11617521181 and 07119903596 and adds - 8 - 11617537999 profile gaskets

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i
2004-2010 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li
2004-2006 E53 BMW X5 4.4i X5 4.8is
2007-2013 E70 BMW X5 4.8i xDrive48i