BMW Internal Engine Parts

If you're the proud owner of an S14-equipped, chances are you're passionate about enhancing your vehicle's performance and longevity. One crucial upgrade that can significantly improve your driving experience is Turner Motorsport's WPC Rod Bearing Replacement Kit, designed for enhanced durability and wear protection. Prevent costly mechanical failures and increase engine life with our WPC-Treated Performance Rod Bearing Service Kit!

Enhanced Durability: The WPC Performance Rod Bearing Replacement Kit is designed with superior materials and manufacturing processes. WPC treatment reinforces the surface of the bearings, making them highly resistant to wear, which is essential for aging engines like the S14. This durability ensures your engine will stand the test of time, even under strenuous driving conditions. Improved Performance: By reducing friction and wear, WPC-treated rod bearings allow for smoother and more efficient engine operation. This translates into increased power and responsiveness, providing you with a more exhilarating driving experience. Whether you're tearing up the track or enjoying a spirited weekend drive, you'll notice a difference in your vehicle's performance. Preventative Maintenance: Proactively replacing your rod bearings and bolts with the WPC Performance Kit can prevent potential engine failures. As engines age and accumulate miles, wear and tear become inevitable. These components help you address this issue head-on, preventing costly engine damage and repairs down the road. This is especially crucial for BMW E30 M3 owners who value their investment. Long-Term Cost Savings: While the initial investment in a WPC Performance Rod Bearing Replacement Kit may seem substantial, it's a small price to pay for the long-term benefits. Preventing engine failure and costly repairs can save you thousands of dollars over the life of your vehicle, not to mention the peace of mind that comes with knowing your BMW is built for reliability. Included in the kit:

8 - Turner Motorsport WPC-Treated "Race Series" Rod Bearing Shells 1 - Oil Pan Gasket 1 - Oil Filter Kit 1 - Oil Drain Plug 8 - Genuine BMW Connecting Rod Bolts 1 - Liqui Moly 10w-40 Engine Oil - 5 Liters 1 - Liqui Moly 10w-40 Engine Oil - 1 Liters 1 - Assembly Lube - 4 oz

Upgrade your Mini's engine with this high-quality Timing Chain Camshaft Gear, designed for enhanced durability and performance. Positioned toward the front of the engine, this thicker gear ensures reliable operation. It is commonly replaced when installing a new timing chain. Benefits include:

• Improved durability and reliability.
• Essential component for proper timing chain function.
• Positioned toward the front of the engine for optimal performance.
• Compatible with various Mini models.
• Easy to install as part of a timing chain replacement.

JE Pistons for BMW/TOYOTA B58B30 - 3.268" Bore, .866" Pin, -12.3CC Dish

Precision-Forged Performance for BMW and Toyota B58 Engines

Unlock the full potential of your BMW B58B30 or Toyota B58 engine with JE’s forged piston set, designed to provide durability, lower compression, and efficiency for turbocharged or high-performance builds. Whether you’re aiming for street performance or track dominance, these pistons offer the strength and reliability needed for modern forced induction engines.

• Engine Compatibility: Fits both BMW B58B30 and Toyota B58 engines, making it ideal for vehicles like the Toyota Supra (A90) and BMW models such as the G29 Z4 and G20 3-Series.
• Bore Size: 3.268" (83mm) bore for precise fitment, ensuring optimal sealing and performance in high-horsepower applications.
• Pin Diameter: 0.866" (22mm) wrist pin for secure and reliable piston-rod engagement, even under extreme stress.
• Dish Volume: -12.3cc, providing a lower compression ratio for boosted applications, perfect for turbo setups aiming for high power with reduced knock potential.
• 2618 Forged Aluminum Alloy: Manufactured from high-strength 2618 aluminum, renowned for its durability, heat resistance, and ability to withstand the intense conditions of high-performance engines.
• Compression Control for Forced Induction: The -12.3cc dish volume is engineered for lower compression, allowing for safe tuning under high boost pressure while maintaining reliability.
• Thermal Coating: Advanced coatings minimize heat absorption, improving durability under intense engine loads and extending piston life.
• Lightweight Design: Optimized for reduced mass, these pistons improve throttle response and rev speed without sacrificing strength or endurance.
• Track-Tested Performance: Designed and tested for both street and competition use, ensuring that you get race-level performance in your everyday build.

Built for Boosted Power and Reliability

E Pistons 8.5:1 Piston Kit - BMW S14B23 Engine (Set of 4)

Unleash the full potential of your BMW S14B23 engine with the JE Pistons 8.5:1 Compression Kit, engineered for maximum strength and reliability in forced induction builds. Perfect for turbocharged or supercharged applications, these pistons are designed to handle high boost levels, ensuring your engine can withstand extreme pressures while delivering smooth, consistent performance.

Key Benefits:

• Optimized Compression (8.5:1): Lower compression ratio designed specifically for turbo or supercharged setups, helping manage cylinder pressures for greater tuning flexibility and boost potential.
• Forged for Toughness: Crafted from 2618 aluminum alloy, these pistons are forged to withstand extreme stress and temperature, making them ideal for high-boost, high-revving engines.
• Thermal Efficiency & Durability: Enhanced heat dissipation design reduces the risk of detonation, allowing your engine to run cooler under heavy load.
• Friction-Reducing Skirt Coating: Helps to reduce wear, improving the longevity of both the pistons and the engine, even under intense driving conditions.
• Complete Installation Kit: Comes with four pistons, rings, wrist pins, and locks, providing everything you need for a smooth installation process.

Why Choose JE Pistons?

JE Pistons are a trusted name in motorsport for delivering unbeatable strength and performance. This 8.5:1 piston kit allows you to push your BMW S14B23 engine to new limits with confidence, whether it’s for track use, drag racing, or a high-performance street build.

Applications:

• Fits BMW S14B23 Engines (E30 M3, high-performance builds)
• Ideal for turbocharged or supercharged configurations.

Technical Specifications:

• Compression Ratio: 8.5:1 for optimal forced induction performance.
• Material: Forged 2618 aluminum alloy for unmatched strength.
• Bore Sizes: Customizable options for overbore requirements.

• Manufactured from high-tensile strength 4340 alloy for exceptional durability
• H-beam design for improved strength and reliability
• Equipped with ARP 2000 bolts achieving a clamp load of 220,000 psi
• Designed in-house using advanced CAD and FEA software for superior quality
• Center to Center: 148.30mm
• PE Bore: 22mm full float / PE Width: 21mm
• BE Bore: 53.66mm / BE Width: 23.9mm