Turner Motorsport Lightweight N54 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N54-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N54 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N54 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Clutch Alignment Tool - P# 056212LA01A
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
8620 steel pilot bearing pin for maximum wear resistance
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life.

Tracking your vehicle is all fun and games until you start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much-improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention.

Kit Contents:
Pressure Plate
Two Organic Discs
Steel Single Mass Flywheel
Pilot Bearing/Bushing and Throw-out Bearing (when applicable)
Alignment Tool

BMW E39 540i Stage 2 Clutch Kit is designed to enhance the performance and reliability of your BMW's clutch system. Ideal for enthusiasts looking to upgrade from the stock setup, this Stage 2 clutch kit delivers superior holding power and durability.

• Increased Holding Capacity: Provides 70% more holding power compared to stock, accommodating higher torque and demanding driving conditions.
• Heavy-Duty Construction: Features a reinforced pressure plate for added strength and longevity.
• Enhanced Durability: Includes a sprung organic/fiber tough disc, ensuring long-lasting performance and smooth engagement.
• Complete Kit: Comes with all necessary components, including a pressure plate, clutch disc, throw-out bearing, pilot bearing or bushing, alignment tool, and pressure plate bolts.
• Flywheel Compatibility: Designed to work with a single mass flywheel (flywheel not included).

Turner Motorsport recommends the BMW E39 540i Stage 2 Clutch Kit for those seeking improved clutch performance and durability.

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version. 

• FX100 (Stage I)

• High performance street system

• Holding capacity 70% over stock

• Heavy-Duty reinforced pressure plate

• Hi-Leverage™ pressure ring design

• Sprung hub/cushioned disc

• Steel-backed organic friction material

Fitment in following BMWs:This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission 

Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life.

Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention.

Kit Contents:
Pressure Plate
Two Organic Discs
Steel Single Mass Flywheel
Pilot Bearing/Bushing and Throw-out Bearing (when applicable)
Alignment Tool
Rated for upwards of 660 ft/lbs of torque

Elevate your vehicle's clutch performance with the all-inclusive Performance Clutch Installation Kit, tailor-made for stage one clutch upgrades. This kit includes a robust steel flywheel for enhanced durability.

FX250 (Stage 2) Features:

• High-performance street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Hi-Leverage™ pressure ring design
• Sprung hub/cushioned disc
• Steel-backed Organic/Fiber Tough disc

Experience the Clutch Masters difference with our clutch kits, which include all the essential components:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing (when applicable)
• Pilot Bearing or Bushing (when applicable)
• Alignment Tool

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit features an Xtreme pressure plate, a Performance Street sprung clutch disc, and an XACT Streetlite Flywheel.

Their Xtreme pressure plate offers a 50-120% clamp load increase, moderate to heavy pedal feel, and is recommended for high performance street and racing applications. All diaphragms went through a four stage heating process for increased strength and unparalleled performance.

Next in this kit is the Performance Street clutch disc. This is the most popular sprung clutch disc and features high quality organic friction material with a high copper content for improved heat transfer and a steel backed lining for increased strength in burst load circumstances. This organic clutch disc has a significantly higher torque capacity than a stock disc but still retains a long life span and operates quietly and reliably.

Clutch Kit Specs:

• Torque Rating: 520 ft/lbs
• 68% torque capacity increase over stock!
• Type of Disc: Street
• 26-count spline
• Spline Size: 1-3/8" inch
• Disc Weight: 3.5 lbs
• Pressure Plate Weight: 10.7 lbs
• 1 year Warranty from retail purchase date!

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Rigid organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. 

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit features a Heavy Duty pressure plate, an G6 racing clutch disc, and an XACT Streetlite Flywheel.

The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate  pedal feel, and heat treated diaphragms for increased strength and performance.

Next in this kit is the G6 racing clutch disc. This disc is a sprung, 6-pad disc that is suited for high horsepower road and track style racing and is also better at handling higher heat versus the 4-pad version of this disc, the G4. The G6 pads are composed of ceramic friction materials and the disc has a chome-moly hub that is heat treated for additional strength under high load engagements. Also featured are heavy duty torsional springs that are rated for the clutch kit's expected uses. Over stock, this clutch kit has a much higher torque capacity and is better for quick shifting thanks to lower weight and inertia. Despite its ceramic racing style pads, this disc has great durability. In turn, these pads provide higher heat tolerances and faster, more aggressive clutch engagements.

The final main component is the XACT Streetlite Flywheel. This option is the most popular thanks to it versatility for street driving and drag/track style racing, its lighter weight for increased throttle response, and its single mass design.

Clutch Kit Specs:

• Torque Rating: 565 ft/lbs
• 86% torque capacity increase over stock!
• Type of Disc: Racing
• 26-count spline
• Spline Size: 1-3/8" inch
• Disc Weight: 4 lbs
• Pressure Plate Weight: 10.2 lbs
• Flywheel Weight: 24.5 lbs
• 1 year Warranty from retail purchase date!

Upgrade your MINI's clutch system with this comprehensive Performance Clutch Installation Kit, featuring an aluminum flywheel for enhanced performance. Designed for stage one clutch upgrades, the FX300 (Stage 3) kit offers a high-performance street system with 70% more holding capacity than stock. Enjoy smoother shifts and improved durability with the heavy-duty reinforced pressure plate and Hi-Leverage™ pressure ring design. The kit includes a sprung hub/cushioned disc and a steel-backed fiber friction-lined disc for optimal performance.

• High performance street system
• 70% more holding capacity over stock
• Heavy-Duty reinforced pressure plate
• Hi-Leverage™ pressure ring design
• Sprung hub/cushioned disc
• Steel-backed Fiber Friction lined disc
• Complete kit includes pressure plate, clutch disc, throw-out bearing, pilot bearing or bushing, and alignment tool

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel 

Fitment in following BMWs:This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission  *Door Buster Special - New Product*

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit features a Heavy Duty pressure plate, a Performance Street sprung clutch disc, and an XACT Streetlite Flywheel.

The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate  pedal feel, and heat treated diaphragms for increased strength and performance.

Next in this kit is the R6 racing clutch disc. This disc is an unsprung, rigid disc with 6 pads that is best suited for drag and road racing and handles heat better thanks to its increased surface contact area versus the 4 pad version of this disc, the R4. The R6 pads are composed of ceramic friction materials and the disc has a chome-moly hub that is heat treated for additional strength under high load engagements. Over stock, this disc is much better for faster shifting and significantly higher torque loads. Unlike the stock disc, this racing disk has a slightly shortened life span due to its rigid design and pad composition. This in turn is offset thanks to its fast, aggressive engagement for track use.

The final main component is the XACT Streetlite Flywheel. This option is the most popular thanks to it versatility for street driving and drag/track style racing, its lighter weight for increased throttle response, and its single mass design.

Clutch Kit Specs:

• Torque Rating: 505 ft/lbs
• 83% torque capacity increase over stock!
• Type of Disc: Racing
• 10-count spline
• Spline Size: 1-1/8" inch
• Disc Weight: 2.4 lbs
• Pressure Plate Weight: 11.2 lbs
• Flywheel Weight: 15.9 lbs
• 1 year Warranty from retail purchase date!

Fitment in following BMWs:
E36 BMW - Non-M submodels, ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.
E46 BMW - Non-M submodels, For vehicles with 5 speed transmissions only. Fits 325i/Ci models with a production date up to 03/2003.
Z3 BMW - Non-M submodels,  ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.

Enhance your Mini's performance with the comprehensive Performance Clutch Installation Kit, designed for a stage one clutch upgrade, featuring an Aluminum Flywheel. The FX400 (Stage 4) kit offers a high-performance street system, equipped with a Heavy-Duty reinforced pressure plate, Hi-Leverage™ pressure ring design, and a Sprung hub/cushioned disc. With 70% more holding capacity over stock, this kit ensures exceptional performance.

• High performance street system
• 70% increased holding capacity over stock
• Heavy-Duty reinforced pressure plate
• Hi-Leverage™ pressure ring design
• Sprung hub/cushioned disc
• Steel-backed 6-puck ceramic sprung lined disc
• Complete kit including pressure plate, clutch disc, throw-out bearing, pilot bearing or bushing, and alignment tool

Upgrade your Mini's clutch system with this Performance Clutch Installation Kit, designed for a stage one clutch upgrade. This kit includes everything you need for installation, featuring a dampened disc version suitable for use with a single mass flywheel. The FX100 (Stage I) clutch system offers high performance for street use, with a holding capacity 70% over stock for enhanced durability. Equipped with a heavy-duty reinforced pressure plate and Hi-Leverage™ pressure ring design, this kit ensures reliable clutch engagement and longevity. The included sprung hub/cushioned disc and steel-backed organic friction material provide smooth operation and consistent performance. Please note that this kit does not include a flywheel.

• Suitable for stage one clutch upgrade
• Compatible with single mass flywheel
• High performance street system
• 70% higher holding capacity than stock
• Heavy-duty reinforced pressure plate for durability
• Hi-Leverage™ pressure ring design for reliable engagement
• Sprung hub/cushioned disc for smooth operation
• Steel-backed organic friction material for consistent performance
• Flywheel not included

Upgrade your Mini's clutch system with the Performance Clutch Installation Kit, ideal for stage one clutch upgrades. This kit includes everything you need for installation, featuring the FX400 (Stage 2) clutch. Benefits include:

• Suitable for stage one clutch upgrades.
• High-performance street system for improved performance.
• Increased holding capacity, 70% over stock.
• Heavy-duty reinforced pressure plate for durability.
• Hi-Leverage™ pressure ring design for enhanced performance.
• Sprung hub/cushioned disc for smoother engagement.
• Steel-backed Ceramic Lined Sprung Disc friction material for reliability.
• Requires new single mass flywheel FW801AL or FW801SF (not included).

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Rigid organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool

Fitment in following BMWs:This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission