Select Vehicle
BMW
Mini
Purpose
Category
-
Performance Clutch Kits
Create an account to be able to build Wish Lists.
Turner Motorsport Lightweight N54 Flywheel & Upgraded Clutch Kit
Unlock the full potential of your N54-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.
Why Choose This Kit?
This setup features the Turner Lightweight N54 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.
The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.
Kit Contents:
Turner Lightweight N54 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Clutch Alignment Tool - P# 056212LA01A
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:
Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
8620 steel pilot bearing pin for maximum wear resistance
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:
Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.
This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.
Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.
BMW E39 M5 South Bend Stage 2 Daily Clutch Kit provides a powerful, durable upgrade for the E39 M5, combining exceptional torque capacity with daily drivability. Turner Motorsport offers this clutch kit, designed to handle high horsepower modifications with ease. Featuring a heavy-duty pressure plate and high metal-content organic disc, this clutch system delivers double the friction of a stock lining and a burst strength up to 12,000 RPM.
Ideal for both daily use and moderate race conditions, this Stage 2 clutch kit is rated to manage up to 440 lbs/ft of torque. The solid-hub center section is optimized for compatibility with the OE dual-mass flywheel, ensuring a smooth, reliable driving experience while maintaining a nearly stock pedal feel.
Recommended for daily, street, and moderate race applications.
BMW E46 M3 Stage 2 Daily Clutch Kit is designed to deliver impressive power handling and daily drivability for modified E46 M3s. Turner Motorsport offers this high-performance clutch kit, engineered to withstand increased horsepower and torque while maintaining a near-stock pedal feel. Featuring a heavy-duty pressure plate and high metal-content organic disc, this Stage 2 clutch kit is ideal for street driving, moderate racing, and daily performance needs.
With an enhanced clamp load that doesn’t compromise pedal pressure, this clutch kit is conservatively rated to handle up to 340 lbs/ft of torque. Its solid-hub center design ensures smooth compatibility with the OE dual-mass flywheel, making it a reliable choice for E46 M3 enthusiasts looking to upgrade their clutch system for increased durability and strength.
Recommended for daily, street, and moderate race use.
BMW E46 E39 Stage 2 Daily Clutch Kit delivers a powerful yet smooth upgrade for drivers seeking enhanced performance without sacrificing daily comfort. Turner Motorsport presents this high-quality clutch kit, designed for BMW E46 and E39 models, with a heavy-duty pressure plate to handle high horsepower modifications. The organic disc material, enriched with metal content, provides double the friction coefficient of a standard clutch, ensuring maximum rotational strength up to 12,000 RPM.
This clutch kit is conservatively rated to handle up to 385 lbs/ft of torque, making it suitable for daily, street, and moderate race applications. Its solid-hub center section is perfectly compatible with the OE dual-mass flywheel, delivering a blend of strength, durability, and near-stock pedal feel.
Recommended for daily, street, and moderate race applications.
Enhance your BMW's performance with a Heavy Duty Pressure Plate, designed for high-performance modifications. This pressure plate provides an increased clamp load without significantly raising pedal pressure. The Organic disc material boasts a high metal content, doubling the co-efficient of friction compared to stock linings and reinforcing rotational strength up to a 12,000 RPM burst point. Despite its robustness, this clutch system maintains a stock feel while ensuring durability and strength.
Upgrade your BMW's performance with a Stage 2 Daily Clutch Kit, providing enhanced durability and performance while maintaining a familiar driving feel.
An SFI approved single mass flywheel is recommended for this application to get optimal performance. This clutch system is designed for the racing climate. The pressure plate is precision balance for vibration free operation at high RPM. The pressure plate fulcrum is altered for a positive disengagement and a quick shift. The disc is engineered with a Dual Damped design to provide accurate control when accelerating through corners. The friction material is a hybrid using a full face Feramic (Sintered Iron) lining on the flywheel side and a high metal content Organic lining on the pressure plate side. Engagement is positive yet buffered due to the high graphite content unique to Feramic facings.
Stage 2 Endurance Clutch Kits:
Recommended uses are daily and street with an emphasis on Rally and Endurance racing.
Rated to hold 495lbs/ft of torque.
Featuring a solid-hub center section for use with an OE dual-mass flywheel
MINI R56 Stage 2 Endurance Clutch Kit is engineered for high-performance driving and racing environments. Designed to withstand the rigors of rally and endurance racing, this clutch kit delivers enhanced durability and performance while maintaining smooth operation.
This Stage 2 Endurance Clutch Kit combines robust performance with reliable operation, making it a great choice for MINI enthusiasts who demand high performance under demanding conditions.
This product was last offered at the strikethrough price on
05-07-2026
This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with significant load increase over stage 1,2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. The sprung centers on the disc in conjunction with the marcel fin between the linings create a dual dampening effect that simulates O.E. start performance. A Performance Organic friction material with a high metal content increases torque and RPM capability and maintains low operating temperatures which reduces wear and glazing.
Stage 3 Daily Clutch Kits:
Recommended usages are daily, spirited street and occasional track
Conservatively rated to hold 500lbs/ft of torque
Featuring a solid-hub center section for use with an OE dual-mass flywheel
Upgrade your BMW's clutch system with this Stage 3 Daily Clutch Kit, designed for high-performance vehicles seeking OEM-like start performance. Engineered with a Race Engineered (SS) pressure plate, this kit offers a significant load increase over stage 1 and 2 pressure plates, providing enhanced durability and performance. Experience a 20%-25% increase in pedal effort, ensuring precise control during acceleration. The discs are equipped with heat-treated wear-resistant hubs, drive plates, and springs for optimal load transfer and reliable operation. The sprung centers and marcel fin on the disc deliver dual dampening effects for smooth starts, similar to OEM performance. With a Performance Organic friction material, this kit enhances torque and RPM capability while maintaining low operating temperatures to minimize wear and glazing.
Boost your BMW E39 M5's performance with the South Bend Clutch Stage 2 Daily Clutch, designed to handle increased horsepower and torque demands while maintaining everyday drivability. Engineered with high-quality materials and advanced technology, this clutch kit ensures durability and reliability for both street and moderate racing applications.
Upgrade your BMW E39 M5 with the South Bend Clutch Stage 2 Daily Clutch and experience improved performance without compromising on drivability.
Turner Motorsport presents the MS Twin Disc Clutch Kit (MS-006-005) by DKM®, an exceptional clutch solution designed for BMW applications. Engineered to handle 100 to 200% more torque capacity, this twin disc kit features sprung organic discs, providing increased contact surface for higher torque capacity and an extended lifecycle. The kit includes a pressure plate, organic discs, steel flywheel, pilot bearing/bushing, throw-out bearing, and alignment tool for a comprehensive clutch upgrade.
Upgrade your BMW's clutch performance with the MS Twin Disc Clutch Kit from Turner Motorsport.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
03-04-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-13-2026
Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for both performance street and light to moderate track applications such as occasional endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.
Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.
This product was last offered at the strikethrough price on
03-26-2026
Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.
Sachs Performance Clutch Kits include the following upgraded components:
Performance Pressure Plate - Increased clamping force and resistant to wear
Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s
Performance Throwout Bearing - Designed for increased spring pressure and higher RPM function
These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!
Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.
This product was last offered at the strikethrough price on
03-26-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-07-2026
BMW E46 E39 Z3 Stage 2 Endurance Clutch Kit is designed for drivers who demand both precision and durability in high-performance scenarios. Developed by Turner Motorsport, this endurance clutch kit delivers seamless power transfer and quick shifts, making it ideal for both daily driving and intense racing environments. It features an SFI-approved single mass flywheel, which is highly recommended for optimal performance.
This product was last offered at the strikethrough price on
03-04-2026
MINI F54 to F60 Stage 1 Daily Clutch Kit is engineered for high-performance modifications, offering superior strength and durability for MINI vehicles. This heavy-duty clutch kit features an upgraded pressure plate with increased clamp load while maintaining a stock-like pedal feel. The organic disc material, enriched with high metal content, provides a friction coefficient twice that of the stock lining and supports rotational strength up to 12,000 RPM.
This product was last offered at the strikethrough price on
03-04-2026