Select Vehicle
BMW
Mini
Purpose
Category
-
Performance Clutch Kits
Create an account to be able to build Wish Lists.
Upgrade your Mini's clutch system with JMTC's MINI Cooper S Solid Flywheel Conversion Clutch Kit. This kit offers a direct replacement for the OEM dual mass flywheel and clutch set, providing enhanced durability and performance.
Upgrade your Mini's clutch system today with JMTC's reliable and performance-driven clutch kit.
Designed for Mini Cooper enthusiasts seeking enhanced performance, this clutch kit offers unparalleled benefits:
This system features a Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings to keep the clutch pedal travel short and quick. The puck design disc reduces rotational mass and total drive surface area while increasing pounds per square inch on the surface of the friction material. This combination minimizes inertia, accelerating the transfer of torque from the engine to the wheels. The friction material used for this race application is Graphite Impregnated Ceramic. This compound exceeded all other friction materials when testing for durability, reduced chatter, heat transfer and torque capacity.
Stage 2 Drag/Drift Clutch Kits:
Recommended uses are drag racing, drifting and limited street
Conservatively rated to hold 370lbs/ft of torque.
Featuring a solid-hub center section for use with an OE dual-mass flywheel
This clutch kit is equipped with a heavy-duty pressure plate optimized for a puck-style disc without cushioning between the linings to ensure short and responsive clutch pedal travel. The puck-style disc reduces rotational mass and drive surface area while increasing the pressure per square inch on the friction material. This setup minimizes inertia, enhancing torque transfer from the engine to the wheels. The friction material, a graphite-impregnated ceramic, is specifically chosen for race applications due to its superior performance in durability, reduced chatter, efficient heat transfer, and high torque capacity.
Stage 2 Drag/Drift Clutch Kits:
Recommended uses are drag racing, drifting and limited street
Conservatively rated to hold 370lbs/ft of torque.
Featuring a sprung-hub center section for use with a single-mass flywheel
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.
The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.
*Does not include flywheel. Requires use of single mass flywheel
This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with significant load increase over stage 1,2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. The sprung centers on the disc in conjunction with the marcel fin between the linings create a dual dampening effect that simulates O.E. start performance. A Performance Organic friction material with a high metal content increases torque and RPM capability and maintains low operating temperatures which reduces wear and glazing.
Stage 3 Daily Clutch Kits:
Recommended usages are daily, spirited street and occasional track
Conservatively rated to hold 400lbs/ft of torque
Featuring a sprung-hub center section for use with a single-mass flywheel
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
The factory dual-mass flywheel in MINI N14 and N18 engines is engineered for comfort, minimizing drivetrain vibrations and smoothing out gear transitions. However, that comfort comes at a price—28.3 lbs. of rotational mass that dulls throttle response, slows acceleration, and hampers precise rev-matching. Dual-mass flywheels are also notoriously prone to failure under high-performance or tuned driving conditions, and their replacement costs can be steep.
The ECS Performance Lightweight Flywheel Kit eliminates these compromises with a precision-engineered, single-mass flywheel that delivers true enthusiast-grade performance. Weighing in at just 18.8 lbs, this flywheel sheds nearly 10 lbs. of rotating mass compared to OEM—instantly sharpening throttle response, improving clutch feel, and delivering quicker acceleration that transforms the driving dynamics of your MINI.
Performance-Oriented Design: This flywheel is specifically engineered to work with OE and aftermarket unsprung clutch discs. While dual-mass setups provide damping on stock vehicles, switching to a single-mass flywheel with an unsprung disc introduces more direct engagement—ideal for spirited daily driving or track-ready builds. Expect a more aggressive, performance-focused clutch feel.
Key Features:
Lightweight Construction: Sheds nearly 10 lbs. of rotating mass for faster revs and improved acceleration
4140 Chromoly Steel: Heat-treated to HRC 28–32 for outstanding strength, wear resistance, and dimensional stability
Precision-Balanced: Exceeds OEM G16 specification (175 g-mm) for smooth, high-RPM operation
Black Oxide Coating: Offers corrosion resistance and a professional finish
OE-Compatible Fitment: Designed to work seamlessly with N14 architecture clutch kits
SFI 1.1 Certified: Proven safe and reliable under extreme operating conditions
Optimized Step Height: Ensures maximum clutch clamping force and long-term durability
Performance Gains:
OEM Dual-Mass Flywheel Weight: 28.3 lbs
ECS Single-Mass Flywheel Weight: 18.8 lbs
Weight Savings: Nearly 10 lbs of reduced rotational mass
Results: Sharper throttle response, more precise rev-matching, and a more engaging driving experience
Kit Includes:
ECS N14/N18 Lightweight Performance Flywheel
South Bend Stage Two “Daily” Clutch Kit
Pilot Bearing
Throw-Out Bearing
Clutch Alignment Tool
(6) Genuine MINI Flywheel Bolts
This product was last offered at the strikethrough price on
03-04-2026
This product was last offered at the strikethrough price on
03-04-2026
This product was last offered at the strikethrough price on
03-04-2026
The factory dual-mass flywheel in W11-powered MINI Coopers was designed with comfort in mind—minimizing drivetrain vibration and delivering smoother shifts. However, this focus on refinement comes at a performance cost. The hefty 27 lbs. of rotational mass dulls throttle response, slows acceleration, and makes rev-matching more difficult. Dual-mass flywheels are also known to be less reliable in tuned or modified setups and can be expensive to replace when they fail.
ECS Tuning developed their Lightweight Single-Mass Flywheel to address these issues with a performance-focused alternative. Weighing in at just 17 lbs., this flywheel sheds nearly 10 lbs. of rotating mass compared to the OEM unit—transforming throttle response, acceleration, and clutch feel for a more engaging and dynamic driving experience.
**This flywheel is to match with a factory type or aftermarket NON Dampened clutch kit!** MINIs factory set up engagement is dampened by the dual mass flywheel. This will be a little more aggressive engagement of the clutch over the stock factory set up as they system in not dampened!! Can be used from daily to the track days.
Key Features:
Manufactured from 4140 Chromoly Steel Heat-treated and tempered for exceptional strength, wear resistance, and thermal stability. Optimized Hardness (HRC 28–32) Ensures consistent performance and durability under extreme conditions. Precision-Balanced to G16 Standard (175 g-mm) Exceeds OEM balance requirements for smooth, high-RPM operation. Black Oxide Finish Provides effective corrosion resistance and a sleek appearance. SFI 1.1 Certified Validated for safe use in high-performance and racing environments. Direct Fit Engineered to work seamlessly with OE-style clutch kits designed for the W11 engine architecture. Kit Contents:
ECS W11 Lightweight Flywheel OEM LUK Clutch Kit OEM LUK Clutch Alignment Tool OEM LUK Release Bearing Genuine MINI Guide Tube Genuine MINI Flywheel Bolts (M10x48) Upgraded ARP Pressure Plate Screws (M9x15)
This product was last offered at the strikethrough price on
03-04-2026
Upgrade your MINI F Chassis Stage 3 MINI Cooper 2.0L with the high-performance FX300 Clutch Kit. This kit is designed to deliver maximum power transfer and durability for an enhanced driving experience.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.
FX200 (Stage 2)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed kevlar friction material
Fitment in following BMWs:
E46 BMW - Non-M submodels, For vehicles with 5 speed transmissions only. Fits 325i/Ci models with a production date up to 03/2003.
Z3 BMW - Non-M submodels, ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.
FX200 (Stage 2)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed kevlar friction material
Fitment in following BMWs:This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission
The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.
The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.
*Does not include flywheel.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.
FX200 (Stage 2)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed kevlar friction material
*Does not include flywheel.
The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.
The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.
*Does not include flywheel. Requires use of single mass flywheel
Fitment in following BMWs:This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Rigid Disc version
FX500 (Stage 4)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed Ceramic Lined Sprung Disc friction material
*Does not include flywheel.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Ridged Disc version.
FX100 (Stage I)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Ridged hub
Steel-backed organic friction material