Oil System Gaskets

Elring Valve Cover Gasket Set – BMW P# 11129070990
Includes Outer Valve Cover Gasket, Spark Plug Tube Gaskets, and Cap Nut Grommets

Maintain proper engine sealing and eliminate common valve cover oil leaks with this complete Elring gasket set, trusted by professionals and enthusiasts alike. Designed for a precise fit on BMW engines, this kit includes everything needed for a comprehensive valve cover reseal:

Outer Valve Cover Gasket – Provides a tight seal between the cylinder head and valve cover

4 Spark Plug Tube Gaskets – Prevent oil from entering the spark plug wells and affecting ignition performance

15 Cap Nut Grommets – Replace worn grommets to restore proper bolt sealing and prevent oil seepage

Elring is a globally respected OE supplier, known for manufacturing gaskets that meet or exceed BMW’s factory specifications. Whether you're doing routine maintenance or addressing a visible oil leak, this kit ensures long-lasting results with no guesswork or missing pieces.

Fitment – Engineered for a direct replacement and worry-free installation on select BMW models.

Pro Tip: Always inspect the valve cover for cracks or warping before reinstalling. A clean sealing surface is critical for leak-free performance.

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. BMW straight six engines are notorious for leaky valve cover gaskets. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

This valve cover gasket set fits the folowwing BMWs with the M54 engine:

E39 525i 530i For vehicles with production date from 09/2002 
E46 325Ci 325i 325Xi 330i 330Ci 330Xi For vehicles with production date from 09/2002 
E53 X5 For vehicles with production date from 09/2002 
E60 525i 530i 
E83 X3
Z4 2.5i 3.0i

NOW LOCATED UNDER T#337951

Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe

A  leaking N52 oil filter housing gasket can cause a myriad of problems. The most prominent of which is getting oil on your serpentine belt, causing it to shred, get sucked into the engine, and cause catastrophic engine failure. This kit includes everything you need to replace on the car - gasket and bolts, since the bolts are torque to yield (1 time use).

This kit includes:
1 Oil Filter Housing Gasket (11428637821)
1 M8x28 bolt (11427540759)
1 M8x43 bolt (11427540763)
1 M8x78 bolt (11427540758)

Having done quite a few of these jobs, we recommend this E10 1/4" Drive Swivel socket to help get the job done without removing your intake manifold.

This kit is for all N52 engines.

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

• Valve cover gasket

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

We also offer the complete E30 M3 valve cover gasket set

This item fits the following BMWs:
BMW E30 3 Series - M3

Solve Oil Leaks with a Quality Oil Pan Gasket

Is your MINI leaving behind unsightly oil stains? It might be a sign that your oil pan gasket needs replacement. This essential gasket creates a tight seal between the oil pan and the engine block, preventing oil leaks. During installation, it's crucial to ensure proper alignment for a secure fit.

Installation Tips:

• Begin by placing the gasket on the oil pan with the correct orientation.
• Secure it to the lower engine block using screws.

Prevent oil leaks and maintain your MINI's engine in top condition with a dependable oil pan gasket.

The valve cover gasket seals the valve cover to the cylinder head, preventing oil leaks and maintaining engine integrity. Over time, exposure to high engine temperatures causes the gasket's rubber construction to degrade, leading to significant oil leaks. This often presents as a noticeable "burning oil" smell at idle, caused by oil dripping from the valve cover onto the hot exhaust manifolds.

If your valve cover gasket is failing, restore proper sealing and prevent further leaks with this premium OE replacement from Bremmen Parts.

Note: This gasket is designed for the right-side cylinder bank (cylinders 5-8). For the left-side cylinder bank (cylinders 1-4), see T#36913370.

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following engines:
N62 4.4L 4.8L (cylinders 1-4)

Is your Mini experiencing oil leaks down the engine's side, resulting in oil puddles? Resolve this issue effortlessly with a rubber gasket replacement. This factory-made MINI gasket effectively seals the engine cover to the engine head. Here are the key benefits:

• Resolves oil leaks and prevents puddles
• Factory MINI gasket ensures proper sealing
• Easy replacement process
• Includes main outside seal & (4) 11 12 7 513 066 spark plug well seals

Insider tip: Ensure the engine is clean before final replacement. Set the gasket on the engine block and then set the valve cover.