BMW Suspension Parts

Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shoc...

T#:656138

Part#: RSMNONONO

Back Ordered

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not ...

T#:11953

Part#: E9X-REAR-MOUNTS

Ships in 3 Business Days

Sale - Save 14% $ 96.73

This product was last offered at the strikethrough price on
08-14-2026

$ 82.82 USD

Add to Wish List

Qty

Sale - Save 14%

$ 96.73

This product was last offered at the strikethrough price on
08-14-2026

$ 82.82 USD

Add to Wish List

A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

OEM Rein Rear Bump Stop - BMW E9X E84

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:34214790

Part#: 33536767335

In Stock

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The Rear Shock Absorber Bump Stop is an essential suspension component designed to enhance the performance and longevity of your vehicle's rear shock absorbers. This bump stop effectively absorbs impact and provides cushioning, preventing bottoming out during heavy loads or rough driving conditions. Made from high-quality materials, the Rein bump stop ensures durability and resilience, making it a reliable choice for both daily drivers and performance vehicles. Engineered to fit a wide range of vehicle makes and models, the Rein Rear Shock Absorber Bump Stop helps maintain optimal ride quality and handling. With its precise design, it minimizes wear on the shock absorbers, extending their lifespan and improving overall vehicle stability.

Show More Show Less

OE Rear Upper Shock Mount Kit w/ Hardware - F3X F2X

T#:639047

Part#: 33506862725KT2

In Stock

Sale - Save 3% $ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Qty

Sale - Save 3%

$ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a OE Lemforder replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Guide Support - This item fits the following BMW Chassis: F22,F30,F31,F32,F33,F36

Show More Show Less

SPL Parts Pro Adjustable Front Sway Bar End Link Pair - F8X M2/3/4 ...

T#:553784

Part#: SPLFEF8X

In Stock

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Front Tension Rod Pair - E9X E8X F8X ...

T#:553657

Part#: SPLTRE9X

In Stock

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

Show More Show Less

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Front Control Arm Refresh Kit - F22, F23, F30, F31, F32, F33, F36 ...

T#:42099866

Part#: 31126854727TKT

In Stock

Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Qty

Sale - Save 3%

$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Give your BMW the sharp handling it was engineered for with the Front Control Arm Refresh Kit, the perfect solution for a complete front suspension overhaul.

Front Suspension Refresh Kit - F2X, F3X

T#:711928

Part#: 31126852991KT2

Ships on Aug 17, 2026

$ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 490.99 USD

Add to Wish List

Qty

$ 490.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

Show More Show Less

SPL Parts Spherical Rear Lower Control Arm Inner Bushing

T#:26904956

Part#: SPLRLBIE9X

In Stock

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Upgrade your vehicle's performance with our replacement rear lower control arm inner bushings. These bushings feature a low-friction, PTFE-lined spherical bearing, enhancing cornering grip and dynamic geometry. By eliminating OEM bushing deflection and binding, our product preserves camber and toe geometry during bumps. Enjoy improved stability and handling precision, thanks to the maintenance-free FK bearings with PTFE linings. Crafted from high-quality materials including 6061-T6 aluminum and FK PTFE-lined spherical bearings, our bushings ensure durability and NVH reduction. Experience the benefits of enhanced performance and reliability with our premium upgrade.

Key Advantages:

Enhanced Rear Cornering Grip Elimination of OEM Bushing Deflection and Binding Improved Dynamic Geometry, Stability, and Handling Precision Maintenance-Free FK Bearings, Manufactured in the US, with PTFE Linings Materials Used:

6061-T6 Aluminum Bearing Shells and Spacers FK PTFE-Lined Spherical Bearings (F1 Specification, Self-Cleaning)

Show More Show Less

SPL Parts Front End Links - F2X/F3X 2 and 3 series

T#:587641

Part#: SPL-FE-F3X

In Stock

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

These endlinks are length adjustable to eliminate preload on the sway bars, which can result from uneven settling of springs or uneven suspension heights from corner weighting. Black Anodized 6061-T6 Aluminum Turnbuckles work in conjunction with the left and right hand threaded rod ends for simple and precise adjustment.

Show More Show Less

Front Swaybar Endlinks - 06-13 BMW 3 Series/1 Series (E9X/E8X) (M Ver...

T#:33913475

Part#: SPL FE E9M

In Stock

$ 449.00

This product was last offered at the strikethrough price on
06-18-2026

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

Rein Rear Lower Control Arm Balljoint - Outer - E82, E88, E90, E91, E...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:403252

Part#: 33326792553

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Restore your vehicle's original handling feel.

SPL Parts Pro Adjustable Rear Sway Bar End Link Pair - F8X M2/3/4 ...

T#:553734

Part#: SPLREF8X

In Stock

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

When lowering your vehicle it is important to have adjustable end links to correct preload on your sway bars. Sometimes suspension is set improperly from left to right corner - SPL adjustable end links allow you to quickly and properly eliminate preload no matter what the situation calls for.

Show More Show Less

SPL Parts Titanium Series Adjustable Rear Toe Arms with Eccentric Loc...

T#:553695

Part#: SPLRTAELF8X

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

T#:389645

Part#: 192416-1J

In Stock

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

SPL Parts Pro Adjustable Rear Sway Bar End Link Pair - E8X E9X RWD ...

T#:553735

Part#: SPLREE9X

In Stock

$ 224.10 USD

Add to Wish List

Qty

$ 224.10 USD

Add to Wish List

These SPL Parts adjustable rear sway bar end links replace OEM part number 33556764428

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Aftermarket sway bars and aggressive driving exact a punishing toll on your sway bar end links, often causing them to snap or bend. To combat this, pick up these SPL Pro Adjustable end links that are much stronger than stock and are also allow for adjustments to best suit your suspension configuration. These also allow for you to set or eliminate preload quickly. SPL Pro rear end links utilize Teflon lined 1/2" FK bearings that offer the highest load capacity possible.

Technical specifications:

6061 aluminum turnbuckles
left hand and right hand threaded rod ends
Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Submodels
2008-2013 E8X BMW All Submodels

Show More Show Less

SPL Parts Titanium Series Adjustable Front Lower Street Control Arms ...

T#:553775

Part#: SPLFLCAF8X

Ships in 3 Business Days

$ 719.00 USD

Add to Wish List

Qty

$ 719.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...

T#:17804825

Part#: SPLRLCBE9X

In Stock

$ 152.00 USD

Add to Wish List

Qty

$ 152.00 USD

Add to Wish List

These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87

Show More Show Less

SPL Parts Titanium Series Adjustable Rear Camber Arm Pair - E46 Z4 ...

T#:825816

Part#: SPLRLLE46

In Stock

$ 404.00 USD

Add to Wish List

Qty

$ 404.00 USD

Add to Wish List

These SPL parts adjustable rear camber arms replace OEM part number 33326770813 These rear camber arms allow for significantly greater camber adjustment over stock, a major benefit to lowered cars that need their camber readjusted to prevent tire wear and poor handling. These camber arms also provide increased stability and predictability versus the stock camber arms with rubber bushings. SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. These rear camber arms from SPL parts utilize gun drilled 6061-T6 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and a 360 degree rotating clamp system. This provides optimal strength, performance, durability, and adjustment simplicity. SPL's adjustment design makes it simple to lock in your alignment settings, requiring only a 3/16" allen key! Features custom 3 piece FK bearings and rod ends manufactured in Connecticut - these also utilize a teflon liner which promotes quiet operation, low friction, and smooth articulation while eliminating bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner is suited perfectly for track use, with operating temperatures ranging from -65 degrees Fahrenheit to 325 degrees. Technical Specifications: Lightweight Aluminum, Titanium, and Stainless steel construction Anodized Black for corrosion protection and durable finish Gundrilled center hex links for maximum weight savings Teflon lined FK Rod Ends Made in the USA Fits the following BMWs: 1999-2006 E46 BMW RWD Models

Show More Show Less

Macht Schnell EDC Emulation Module

T#:5351

Part#: TMS5351

Ships on Sep 3, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

1-series Strut/Shock Mount Kit - E82 128i, 135i

T#:11958

Part#: E82MOUNTKIT

Ships in 3 Business Days

Sale - Save 11% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 150.16 USD

Add to Wish List

Qty

Sale - Save 11%

$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 150.16 USD

Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:

front upper strut mounts (also known as a guide support), 31306775098

A. rear upper-top shock mounts, 33506771737

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33506771738

D. rear upper supporting cup, 33526764418 (sits over bumpstop)

rear lower shock mount (installs on spring arm), 33526768544
Buy as a package and save $!!

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i - Coupe
2008-2012 E88 BMW 128i 135i - Convertible

Show More Show Less

SPL Parts Rear End Links - F2X/F3X 2 and 3 series

T#:587643

Part#: SPL-RE-F3X

Ships in 1 Business Day

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

SPL Parts PRO Series Rear Endlinks for the BMW F2X and F3X chassis feature massive Teflon lined FK 1/2" Bearings to provide the highest load capacity for use with stiffer aftermarket sway bars.

E24 635CSi, E28 528e/535i Bilstein/H&R Sport Suspension Package (M5, ...

T#:401628

Part#: E28SPORT1KT

Ships in 3 Business Days

$ 1,265.99

This product was last offered at the strikethrough price on
08-13-2026

$ 1,138.99 USD

Add to Wish List

Qty

$ 1,138.99 USD

Add to Wish List

This suspension package of Bilstein Sport shocks and H&R Sport springs will lower the ride height and firm up the suspension to provide less bodyroll and better handling. This E24 and E28 suspension package is firm but not harsh and can be used on daily-driven street cars as well as backroad and weekend corner carvers.

H&R Sport springs lower the ride height by 1.25" and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs. The ride quality is a little stiffer than a stock E28 M5.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Although this suspension is listed for the E28 M5 and E24 M6, the original rear self-leveling system must be disabled or removed.

Parts list:

1 set - H&R Sport Springs (50428)
1 pair - Bilstein Front Sport struts (P36-0243 / 34-181546)
1 pair - Bilstein Rear Sport Shocks (B46-0607 / 24-006071)

This item fits the following BMWs:
1982-1988 E28 BMW 528e 533i 535i 535is M5
1982-1989 E24 BMW 633csi 635csi M6

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

T#:11954

Part#: TMS11954

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Shocks and spring Installation Kit - 3 Bolt Top Mount - F22/3 F30/2/3...

T#:553619

Part#: 31306863135KT2

In Stock

$ 611.99

This product was last offered at the strikethrough price on
03-11-2026

$ 564.99 USD

Add to Wish List

Qty

$ 564.99 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

F22/23 228i 228i xDrive M235i M235i xDrive without EDC and production date up 03/2015

F30 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive without EDC and production date up 03/2015

F32/33/36 428i 428i xDrive 435i 435i xDrive

Show More Show Less

E46Xi FRONT CONTROL ARM BRACKET KIT WITH E46 325Xi/330Xi FRONT CONTRO...

T#:401618

Part#: TSU4695PBX/16KT

In Stock

Sale - Save 19% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

Qty

Sale - Save 19%

$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

Show More Show Less

E30 Complete Front & Rear Suspension Rebuild Kit

T#:21735879

Part#: E30SUPRBM1042KT

Ships in 4 Business Days

Sale - Save 8% $ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Experience a new level of comfort and control with our Level 3 Comprehensive Suspension Service for your beloved E30 BMW. Say goodbye to clunks, squeaks, and wandering issues plaguing your vehicle's front and rear ends. We provide an all-in-one solution to address these problems, offering superior performance and durability, ensuring your E30 drives better than ever before. Front-End Upgrades: Lemforder Front Lower Control Arms: Replace worn-out control arms with Lemforder precision-engineered components for enhanced stability and handling. Solid Rubber E36 M3 Front Control Arm Bushings: Improve steering feel and responsiveness with these solid rubber bushings, guaranteeing a more connected driving experience. Lemforder Front Sway Bar End Links: Upgrade your sway bar end links to Lemforder for enhanced durability and reduced play, further enhancing your E30's handling. Sachs Front Strut Mounts: Ensure smooth and controlled ride quality with Sachs front strut mounts, providing improved shock absorption and longevity. Lemforder Inner and Outer Tie Rod Assemblies: Replace your tie rod assemblies with Lemforder precision for precise steering and handling. All Required Retaining Hardware: We include all the necessary hardware to ensure a seamless installation, saving you time and hassle. Rear-End Enhancements: Rear Trailing Arm Bushings: Upgrade your rear trailing arm bushings for improved stability and handling characteristics. Rear Stabilizer Links: Replace worn stabilizer links for better control and reduced body roll during cornering. Upgraded Rear Shock Mounts from the E46 M3: Experience improved ride comfort and handling with upgraded rear shock mounts from the E46 M3. ECS Rear Shock Mount Reinforcement Plates: Ensure the longevity and reliability of your shock mounts with ECS reinforcement plates, protecting against deformation. Rear Shock Mount Hardware and Gasket: We provide all necessary hardware and gaskets to complete the installation seamlessly. Rear Subframe Mounts: Enhance rear-end stability and performance with upgraded rear subframe mounts. Differential Bushing: Improve power delivery and drivetrain response with a new differential bushing.

Show More Show Less

SPL Parts Titanium Series Rear Upper Control Arm Set - F8X BMW ...

T#:553663

Part#: SPLRUAF8X

In Stock

$ 809.00 USD

Add to Wish List

Qty

$ 809.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

E9X M3 Front Control Arm Upgrade Kit w/ Installation Hardware ...

T#:30430683

Part#: 37142283867EKT2

In Stock

Sale - Save 14% $ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Qty

Sale - Save 14%

$ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

T#:5389743

Part#: 37142283867TMSKT

Ships in 1 Business Day

Sale - Save 15% $ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,124.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,124.84 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

Suspension Reinforcement Kit E36

T#:15777304

Part#: 002478ECS01-KT

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The ECS rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The ECS Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.

Show More Show Less

OEM Rein Strut Mount & Bearing - F25 F26

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:402093

Part#: 31306852158

In Stock at Vendor

$ 107.99 USD

Add to Wish List

Qty

$ 107.99 USD

Add to Wish List

Strut mounts and strut bearings are an often overlooked part of suspension system. Remember to replace yours every time you change your shocks and struts.

Coilover Installation Hardware - (3/5/6-Bolt M8)

T#:14684339

Part#: 07119905032TKT

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

All the hardware you need to remove and replace your front and rear suspension with new coilovers.

This Kit includes the following items:

FRONT

Front strut pinch bolts - QTY 2
Front strut pinch bolt nuts - QTY 2
Control arm ball-joint nuts - QTY 4
REAR

Lower shock mounting bolts - QTY 2
Lower shock locking nuts - QTY 2
Upper shock mounting bolts - QTY 6
Shock mounts - QTY 2
Shock pads - QTY 2

Show More Show Less

Lower Front Control Arm Kit - Featuring Turner Motorsport Bushings ...

T#:5416780

Part#: 31126777851TMSKT

Ships on Sep 1, 2026

$ 591.99

This product was last offered at the strikethrough price on
05-13-2026

$ 535.99 USD

Add to Wish List

Qty

$ 535.99 USD

Add to Wish List

The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right Meyle HD control arms with pressed in ball joints Turner 80a poly control arm bushings - pre-installed into the brackets All the necessary mounting hardware

Show More Show Less

SPL Parts Titanium Series Rear Lower Traction Arm Pair - F8X M2 M3 M4...

T#:553689

Part#: SPLRTRF8X

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

Strut Mount & Bearing Replacement Kit - F3X

T#:855009

Part#: 31306881929KT2

In Stock

$ 336.99

This product was last offered at the strikethrough price on
03-11-2026

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Rear Upper And Lower Shock Mount Kit

T#:5498488

Part#: 33506767010KT

Ships in 3 Business Days

Sale - Save 11% $ 145.99

This product was last offered at the strikethrough price on
08-14-2026

$ 130.04 USD

Add to Wish List

Qty

Sale - Save 11%

$ 145.99

This product was last offered at the strikethrough price on
08-14-2026

$ 130.04 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts

Show More Show Less

Rein Rear Sway Bar End Link - E39

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:592454

Part#: 33551095532

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Two per vehicle, replaceable individually.

OEM Rein Front Upper Strut Mount - E60/61 E82/88 E9X

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379735

Part#: 31306775098

In Stock at Vendor

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

Should be replaced each time shocks are replaced due to this being a wearing item on most BMWs.

Shocks and spring Installation Kit - E82 E88 E90 E92 E93 Non M ...

T#:553668

Part#: 31306775098KT2

Ships in 3 Business Days

Sale - Save 4% $ 354.99

This product was last offered at the strikethrough price on
08-14-2026

$ 339.23 USD

Add to Wish List

Qty

Sale - Save 4%

$ 354.99

This product was last offered at the strikethrough price on
08-14-2026

$ 339.23 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

E82/88 128i 135i

E90/92/93 325i 328i 330i 335i 335is

Show More Show Less

SPL Parts Front Lower Control Arms - BMW G20 G22 G23 G42

T#:26271755

Part#: SPLFLCAG2X

Ships in 1 Business Day

$ 719.00 USD

Add to Wish List

Qty

$ 719.00 USD

Add to Wish List

The SPL BMW G2X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the G2X BMWs (M340i, M440i, etc) while eliminating bushing deflection resulting in sharpened steering response and driving precision. The ability to run more negative camber and a slightly wider track width greatly improves the peak lateral grip available. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber. The lower control arms come with a ride height sensor bracket to maintain factory ride height sensor location, regardless of length of the arm to keep those finicky BMW chassis electronics happy. Suitable for all uses, from daily driver to race car. Benefits Adjustable Camber, Roll Center, and Track Width Eliminates Bushing Deflection Improved Tire Life with Ideal Camber Settings Lightweight, High-Strength Construction Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes US Made, PTFE Lined FK Rod Ends Materials 6061-T6 aluminum black anodized arm, clamps, and spacers 4130 CrMo electroless nickel plated double adjuster Ti6Al4V titanium socket head cap screws 304 stainless steel roll center and knuckle spacer 5/8" 4140 CrMo stud FK PTFE-lined spherical bearings (F1 spec, self-cleaning)

Show More Show Less

Strut Mount Replacement Kit - F3X Adaptive M Suspension

T#:855013

Part#: 31306881930KT2

In Stock

$ 386.99

This product was last offered at the strikethrough price on
06-08-2026

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

T#:339943

Part#: E46-MY-DIFF

In Stock

$ 88.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster

Show More Show Less

SPL Parts Rear Upper Arms - F2X/F3X 2 and 3 series

T#:587647

Part#: SPL-RUA-F3X

Ships in 3 Business Days

$ 809.00 USD

Add to Wish List

Qty

$ 809.00 USD

Add to Wish List

SPL Parts TITANIUM Series Rear Upper Arms greatly increase the range of rear camber adjustment for high-performance track/street applications and are a must for lowered cars to meet alignment requirements.

Show More Show Less

SPL Parts Front Tension Rods

T#:587650

Part#: SPL-TR-F3X

Ships in 1 Business Day

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

SPL parts are engineered for maximum performance. Billet Aluminum alloy 2024 hex rods are precision CNC machined and gun-drilled to reduce unsprung weight while maintaining high strength and stiffness. Exclusive 360-degree Rotating Clamp design allows for easy access to quickly and precisely locking in your desired alignment settings.

Show More Show Less

SPL Parts Front Swaybar End Links - G29 Z4, A90 Supra

T#:587634

Part#: SPL-FE-G29

Ships in 1 Business Day

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

Endlinks are length adjustable to eliminate preload on the sway bars, which can result from uneven settling of springs or uneven suspension heights from corner weighting. Black Anodized 6061-T6 Aluminum Turnbuckles work in conjunction with the left and right hand threaded rod ends for simple and precise adjustment. These endlinks are perfect for street or race applications.

Show More Show Less

Suspension Reinforcement Kit

T#:5416754

Part#: 51717036781TMSKT

In Stock

Sale - Save 16% $ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

Qty

Sale - Save 16%

$ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

Includes RTAB limiter, rear shock tower reinforcement plates and BMW Strut tower plates. If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results