MINI F56 Dinan Coilover System offers the MINI driver unparalleled versatility for achieving optimal performance in any situation. This adjustable coil-over suspension system allows for customization, enabling configurations that range from factory-like comfort to maximum performance, or a combination of both. Whether used for daily driving or track performance, the improved suspension provides exceptional traction, enhancing confidence at higher speeds.

The Dinan Coil-Over System for F55/F56/F57 MINI models is engineered to deliver outstanding handling performance. It includes performance-tuned linear rate springs, adjustable front strut assemblies, and rear shocks with integrated bumpstops for reliable behavior. Key benefits include:

• Adjustable Ride Height: Up to 1.7" lower in front and 1.1" in the rear, with a recommended 0.75" (20mm) drop to maintain ride quality.
• Enhanced Handling: 93% stiffer front springs (336 lbs/in vs. 174 lbs/in) and 58% stiffer rear springs (336 lbs/in vs. 213 lbs/in) improve grip and reduce body roll.
• Customizable Comfort: 32 levels of rebound damping adjustment and threaded collars for precise height adjustments.
• Durable Construction: Corrosion-resistant materials and finishes for long-lasting performance.
• Improved Performance: Substantial reduction in body roll and increased handling capabilities.

Note: Not compatible with cars equipped with EDC/DDC.

Elevate your Mini's performance with this height-adjustable sports suspension, offering an adjustable range from 10mm to 20mm. This set includes vibrant red coil springs and comprises:

• Two stainless steel complete struts for the front axle
• Two dampers with threaded and adjustable spring plates for the front axle
• Two dampers for the rear axle
• Two individual springs with adjustable spring plates for the rear axle

Ideal for vehicles without Dynamic Damper Control (SA223), this suspension upgrade enhances handling and allows customization of your Mini's ride height for an improved driving experience.

• Height-adjustable sports suspension for Mini vehicles
• Adjustable range: 10mm to 20mm
• Includes red coil springs for a sporty appearance
• Comprehensive set with components for front and rear axles
• Suitable for vehicles without Dynamic Damper Control (SA223)

Elevate your BMW's performance with this height-adjustable sports suspension, providing an adjustable range from 10mm to 20mm and stylish red coil springs. The set includes two stainless steel complete struts for the front axle, two dampers with threaded and adjustable spring plates for the front axle, two dampers for the rear axle, and two individual springs with an adjustable spring plate for the rear axle. Compatible with vehicles without Dynamic Damper Control (SA223).

• Height-adjustable sports suspension for customized ride height (10mm to 20mm)
• Eye-catching red coil springs for added style
• Complete set includes components for front and rear axles
• Stainless steel struts for durability and performance
• Suitable for vehicles without Dynamic Damper Control (SA223)

Enhance your BMW's handling and ride quality with the Dinan Performance Springs Kit. Paired with Dinan performance springs, this kit takes your driving experience to the next level. The progressive-rate bump stops included in the kit optimize spring rate, providing additional mechanical grip and preventing bottoming out and binding. Enjoy improved suspension travel and a simplified installation process with all hardware included.

• Improved handling
• Preserved ride quality
• Optimized spring rate for mechanical grip
• Maximized suspension travel
• Prevention of bottoming out and binding
• Simplified installation with included hardware
• Earns 1 point towards your Dinan badge

For over 35 years, Dinan has been at the forefront of BMW tuning, blending advancements in modification with a commitment to balanced performance. Installing a Dinan part means not only benefiting from carefully developed and tested components but also enjoying a four-year, 50,000-mile warranty. Embrace the "total package" approach, and once your car is fitted with enough Dinan parts, proudly display the exclusive trunk badge – a symbol of your conversion from stock to Dinan, celebrated by BMW enthusiasts everywhere.

The strut mount is a critical suspension component that provides a secure mounting point and pivot for your BMW's front strut. With higher mileage, the built-in bearing can wear out, leading to reduced suspension performance, increased noise, and compromised handling.

For optimal suspension function and durability, it’s recommended to replace the strut mounts whenever installing new front struts. Choose this premium replacement from Bremmen Parts for a reliable and long-lasting repair.

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

F22/23 228i 228i xDrive M235i M235i xDrive without EDC and production date up 03/2015 

F30 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive without EDC and production date up 03/2015 

F32/33/36 428i 428i xDrive 435i 435i xDrive 

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

E82/88 128i 135i

E90/92/93 325i 328i 330i 335i 335is 

For the driver that demands the best out of their vehicle. The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is awarded to the vehicle from the improved suspension will inspire newfound confidence when running at higher speeds. From the substantial reduction in body roll as well as reduction of dive under braking and squat under acceleration, Dinan guarantees you superior handling, performance, and comfort.

Dinan's design retains the superb factory electronic shocks but swaps the springs to a more aggressive, performance enhancing formula and implements threaded collars that allow the user to change the ride height themselves. While shorter, stiffer springs are commonplace in aftermarket suspensions and are a key element in reduction of body roll it is not a one size fits all approach. In the case of the G87 M2 where the vehicle has a penchant for oversteer, stiffening the rear springs would exacerbate the problem of the rear losing traction before the front when the platform is pushed to the limit. Dinan instead has opted to soften the rear spring rate as well as switch from the factory progressive rate rear to a dual rate spring setup. The combination increases predictability and compliancy, and in turn, provides better rear grip/road holding for a vehicle that needs both. The result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allow the car to be lowered up to 1-1/8" in the front and over 2" inches in the rear. However, to retain the ride quality synonymous with Dinan suspension kits the recommended drop of 3/4" in front and rear is advised. For suspension connoisseurs, or those that are just simply very particular, suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump-stops --- something no respectable race car is without.

Contrary to the market norm, the Dinan G87 M2 kit is not a direct carryover from the G8x M3/M4 but a package independently developed to eke the most out of the M2 and the nuances that differ it from its larger siblings. The rear spring rates in particular on the smaller coupe are far more aggressive than those on the M3/M4 from the factory. This produces a stiffer, more uncomfortable ride than most are fond of beyond the racetrack. While utilizing the same rear springs as the Dinan M3/M4 kit is possible the rates would be substantially softer resulting in reduced stability in cornering and an increase in body roll. Instead, Dinan M2 rear springs are 13% softer than factory but still 10% stiffer than what the M3/M4 kit would offer so a more compliant and comfortable ride can be achieved while also retaining its sporty character and abilities.

NOTE: Due to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.

Features:

• Up to 1-1/8" of lowering in front and over 2" of lowering in back are possible depending on tire clearance but with diminished ride quality
• Dinan recommends a 3/4" drop in front and rear to maintain a civilized ride
• Up to 1" of lift in front and over 2" in back over stock are also possible
• Threaded collars allow easy and precise front & rear vehicle height adjustments
• Spring rates are 29% stiffer in front and 13% softer in the rear for increased predictability and compliancy
• Substantial reduction in body roll
• Dinan-spec progressive bump stops improve ride quality at lowered ride heights
• Included suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort
• Components are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection
• Stock upper spring mounts are utilized as well as spring isolators for quiet operation
• Installation Instructions: https://documents.dinancars.com/6989ab09ca84101aa36da49807f6bf446d195cab.pdf

Swift Springs understands that not all springs are created equal. While many springs may share similar dimensions and spring rates, the manufacturing process and materials used are pivotal to their performance. Drawing upon years of experience and extensive research, Swift Springs has refined the spring manufacturing process to perfection. In their relentless pursuit of excellence, Swift Springs developed a proprietary steel alloy known as "HS5.TW." This material accomplishes the primary objectives Swift had in mind:

• Maintaining the most consistent spring rate throughout the stroke
• Providing the largest amount of stroke
• Ensuring the highest durability against spring height loss
• Offering the lightest weight

Since its establishment in 1997, Swift Springs has taken on a diverse array of tasks and applications, ranging from oval track and dirt racing to enthusiastic street driving. They have accumulated invaluable experience working with world-class race teams and drivers from around the globe. Given the varied demands they've encountered over the years, you can have full confidence in Swift Springs to deliver the perfect spring solution for any requirement.

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides. The Dinan strut tower brace is a very high quality aluminum brace with precision machined ends that match the contours of the strut tower. Other braces simply sit on top which reduces their effectiveness. This is definitely one of the stronger strut brace designs on the market. The center bar is polished aluminum with carbon fiber inlays - an unmistakable sign of precise engineering when you open the hood.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This part is worth 2 points towards your Dinan badge.

This item fits the following BMWs:
2001-2006 E46 BMW M3

Upgrade your MINI R5X with Genuine MINI Hex Bolts for enhanced performance and reliability. Crafted to MINI's exact specifications, these authentic hex bolts ensure a perfect fit and secure fastening for various components of your MINI. Whether you're conducting maintenance or repairs on your MINI, trust Genuine MINI parts to maintain the integrity and performance of your vehicle.

• Genuine MINI hex bolts for guaranteed quality
• Crafted to MINI's exact specifications for perfect fit
• Ensures secure fastening of components
• Enhances performance and reliability of MINI R5X