BMW Suspension Parts

BMW G30 Bilstein EVO T1 Coilover Kit - Front & Rear - 21-24 330e is the ultimate suspension upgrade for enthusiasts seeking superior handling and performance on both the street and track. Designed for precision tuning, this coilover kit features ride height adjustability and a 10-stage manually adjustable damping system, allowing fine-tuned control of both rebound and compression. With threaded-bodied dampers, it enables extreme lowering of up to 70mm, providing enhanced stability, traction, and cornering speed. Built with high-quality components, this system ensures consistent performance for every driving condition. Engineered in Germany and tested on the Nürburgring, the Bilstein EVO T1 Coilover Kit delivers unmatched durability, handling precision, and an aggressive stance.

• Street & track performance – Optimized for daily driving with the ability to handle track conditions
• 10-stage damping adjustability – Customizable rebound and compression settings for precision handling
• Ride height adjustability – Allows lowering up to 70mm for improved aerodynamics and an aggressive stance
• Durable OE-grade construction – Built for long-lasting performance and reliability
• German engineering – Nürburgring-tested for enhanced handling, stability, and cornering control

BMW E36 Bilstein Evo R Front And Rear Suspension Kit is a high-performance coilover system engineered for motorsports enthusiasts seeking superior handling and precision. Designed to excel in extreme track conditions, this kit features 2-way manually adjustable dampers and monoball mounting equipment for enhanced responsiveness. The independent compression and rebound adjustment system offers 100 unique tuning variations, allowing for optimal suspension customization. Adjustable monoball upper mounts (where applicable) provide precise camber adjustments to improve cornering grip and stability. With monotube damper construction and premium components, the Bilstein EVO R delivers consistent, race-proven performance. Hand-built in Germany, this suspension system incorporates advanced technology refined through Bilstein’s Nürburgring racing expertise.

• 2-way adjustable damping – Independently fine-tune compression and rebound with 100 setting variations
• Motorsports-grade performance – Engineered for extreme track conditions with precision handling
• Height and camber adjustability – Customizable suspension setup for improved cornering and stability
• Monotube damper construction – Delivers consistent, high-performance damping under race conditions
• German engineering – Hand-built with race-tested technology derived from Nürburgring development

Black anodized billet sway bar end links to replace your flimsy and corroded factory units. Removable hardware for a lifetime serviceable component!

Your factory end link brackets are a one piece design with an integrated stud made of flimsy metal with no coating to protect from the elements. Over the years the end link hardware rusts right to the integrated stud and when you go to remove the end links or brackets they are one strong turn and a snap away from needing to be replaced.

Not only did ECS come up with a stronger solution with a superior resistance to corrosion but went the extra mile to incorporate hardware that can be replaced time and time again so you will never need to replace the brackets themselves. The end link brackets feature chamfers and locator pins to fit perfectly in factory location and make for a straight forward install. The brackets featuring a slotted area for the bolt head to sit so you don't have the headache of having to get a wrench in the tight space behind the bracket while installing them.

Kit Contents:

A pair of rear end link brackets
Hardware needed for installation
Part Design:

Billet aluminum brackets
Zinc coated hardware
Superior corrosion resistance
Large upgrade from factory components

Due to their soft rubber construction, OE strut mounts are known to wear at an accelerated rate. Many high-mileage vehicles fall victim to strut mount failure, which is commonly associated with annoying clunks, groans, or rattles from the front suspension.

With this issue in mind, ECS Tuning developed their heavy-duty front strut mount with upgraded, higher durometer rubber to resolve sloppy handling and increase longevity. Manufactured precisely within OEM tolerances, these mounts are a perfect fit for your MINI.

Features:

Reduces deflection: Increases vehicle handling and cornering dynamics by removing deflection within the strut mount. Increases longevity: Upgraded rubber construction makes for a stiffer mount, less prone to cracking and general degradation. Developed in-house: Designed and tested by ECS Tuning engineers, this mount is sure to outlast an OE replacement. Upgrade to a better strut mount without sacrificing ride comfort! Improve longevity and ride control all at once.

BMW E46 Z4 Rear Polyurethane Differential Bushing Performance is the ultimate upgrade for enhancing the connection between your BMW's chassis and differential. Designed by Turner Motorsport, this performance bushing replaces the soft factory rubber with durable polyurethane, offering superior control and response. By minimizing vibrations and reducing deflection, this bushing ensures a more direct and responsive driving experience, making it a must-have for any performance-oriented BMW E46 or Z4 owner.

• Enhanced Performance: Replaces the soft factory rubber with durable polyurethane for improved driveline response.
• Reduced Vibrations: Minimizes vibrations between the chassis and differential, providing a more connected driving experience.
• Increased Durability: Made from high-quality polyurethane, offering long-lasting performance under demanding conditions.
• Improved Control: Reduces deflection, ensuring a more precise and responsive handling experience.

The ECS Strut Tower Bar Kit in striking wrinkle black finish goes beyond aesthetics - it offers essential functionality. This kit significantly reduces chassis flex, contributing to a stiffer suspension setup. Moreover, it plays a crucial role in triangulating the front end, resulting in more consistent suspension geometry that enhances your vehicle's performance.

It's essential to ensure that the strut tower plates sit flush against the strut towers. Any misalignment may indicate minor deformations in your strut towers. However, this can be easily addressed using a block of wood and a hammer to reinstate the ideal alignment.

BILSTEIN B4 OE Replacement Series Gas Pressure Shocks and Struts for BMW

The Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically designed for BMW vehicles, offering the perfect solution to maintain the original ride quality while meeting or exceeding OE standards. These dampers are ideal for drivers who want to restore their BMW's original performance and handling, backed by Bilstein's renowned quality.

Key Benefits:

• Maintains constant damping characteristics under any load
• Delivers consistent performance and handling, providing a fresh "new car" feel
• Utilizes proven Bilstein gas pressure technology for reliable performance
• Meets high OEM quality standards for durability and reliability
• Comes with a limited lifetime warranty against defects in material and workmanship

Due to their soft rubber construction, OE strut mounts are known to wear at an accelerated rate. Many high-mileage vehicles fall victim to strut mount failure, which is commonly associated with annoying clunks, groans, or rattles from the front suspension.

With this issue in mind, ECS Tuning developed their heavy-duty front strut mount with upgraded, higher durometer rubber to resolve sloppy handling and increase longevity. Manufactured precisely within OEM tolerances, these mounts are a perfect fit for your BMW.

Features:

Reduces deflection: Increases vehicle handling and cornering dynamics by removing deflection within the strut mount. Increases longevity: Upgraded rubber construction makes for a stiffer mount, less prone to cracking and general degradation. Developed in-house: Designed and tested by ECS Tuning engineers, this mount is sure to outlast an OE replacement. Upgrade to a better strut mount without sacrificing ride comfort! Improve longevity and ride control all at once.

Elevate your driving experience with enhanced performance and aesthetics. ECS lowering springs are crafted to optimize both handling and comfort, striking the perfect balance between performance and drivability. With an average lowering range of 1.6", enjoy the benefits of a lower center of gravity, resulting in superior cornering and enhanced steering feedback. Not only do these lowering springs improve handling, but they also deliver a remarkable aesthetic transformation by reducing the wheel gap, giving your car a more planted and fitted appearance.

The example pictures shown are of both xDrive(Red F22) and Rwd(Blue F22)

Features and Design:

Average FRONT lowering of 1.0" - 1.4"
Average REAR lowering of 1.2" - 1.6"
Lowered center of gravity
Compatible with cars equipped with EDC
Linear style springs
Black powder coating with red ECS logo
MADE IN THE USA
Designed specifically for your chassis these ECS lowering springs feature a linear style spring similar to a coilover. The issue with coilovers is the rough ride due to a drastic drop and much higher spring rates. When you have a higher spring rate like coilovers, it takes much more force to compress the spring, leading to a much more rigid ride. ECS lowering springs provide a happy medium between the factory suspension and coilover suspension. Our springs are stiffer than factory but softer than a coilover spring to achieve the balance of increased performance and aesthetics while retaining a comfortable ride.

The ECS Tuning Billet Front Sway Bar Mounting Kit will provide your vehicle with a more rigid mounting solution from the sway bar to chassis than the OEM steel brackets. With an improved sway bar mounting bracket and the included polyurethane sway bar bushings you can expect to achieve an increase in rear sway bar effectiveness and less body roll as a result.

PART DESIGN

The front sway bar mounting brackets are made from a solid piece of 6061-T6 billet aluminum that are precision CNC-machined to bolt into the OEM mounting location while utilizing greaseable, polyurethane bushings. They are Type II black anodized for corrosion protection and include zinc flake coated Class 12.9 alloy steel bolts for premium performance.

The red polyurethane bushings feature a greaseable channel for extended service life and quieter operation than standard polyurethane bushings.

PERFORMANCE FEATURES

Billet & poly mounts replacing the OEM steel & rubber configuration you can expect faster reaction speed and greater effectiveness from your front sway bar due to less deflection. This translates to better handling with sharper, flatter cornering with reduced body roll.

PRODUCT DEVELOPMENT

ECS Billet Front Sway Bar Mounting Kit was designed, engineered, tested and quality inspected by the Research and Development team in our Wadsworth, Ohio facility to ensure the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.

INSTALLATION AND SUPPORT

Installation is simple. Simply unbolt your front sway bar mounting brackets and slip over our poly bushings and billet mounting brackets with the included hardware. That's it! Enjoy better handling and a crisp front suspension.

SPECIAL NOTE: You can use any conventional automotive bearing grease for service.

Enhance your BMW’s performance and style with this unbeatable combo! The Turner Motorsport Carbon Fiber Strut Brace and Engine Cover are the ultimate pair to upgrade chassis stability and engine bay aesthetics—all with a single purchase.

G20/G42 Carbon Fiber Strut Brace

For G20 and G42 BMW models equipped with the B48 or B58 engines, the driving thrill is undeniable. Yet, these cars lack a crucial component found in high-performance M models: structural chassis bracing. With Turner Motorsport’s 3-point Carbon Fiber Strut Brace, you’re adding the missing link to your BMW, mirroring the handling stability of an M3 or M4. This is the only strut brace that elevates G20/G42 handling by emulating the stiffness of an M-series chassis, giving you a dynamic edge on both road and track.

The strut brace fits seamlessly into your BMW using the original factory hardware and an included stud kit, offering a hassle-free, direct installation with no modifications required. Designed and tested in-house by Turner Motorsport, this brace reduces chassis flex, enhancing control during spirited driving and providing a tighter, more responsive feel. Constructed from high-strength carbon fiber with billet aluminum end brackets, this strut brace boosts performance while adding an eye-catching focal point to your engine bay.

Strut Brace Features:

Enhanced Chassis Rigidity: Reduces flex by linking the strut towers, promoting a more precise steering response. Street and Track Ready: Engineered for the best of both worlds, offering stability in all driving conditions. Premium Carbon Fiber & Billet Aluminum: Lightweight yet highly rigid, with a stunning woven 2x2 twill finish. Easy Installation: Fits perfectly with stock mounting points using supplied hardware, ensuring a hassle-free setup. Carbon Fiber: Performance & Style

Turner’s strut brace uses structural carbon fiber, designed to endure the rigors of aggressive driving without compromising aesthetics. The brace's distinct, gloss-finished carbon fiber weave adds a sophisticated, high-performance look akin to exotic supercars. Engineered for precision, this brace effectively distributes cornering forces between the strut towers, minimizing chassis distortion and maintaining optimal wheel alignment, even in hard turns.

Turner Motorsport G-Chassis Carbon Fiber Engine Cover for B58 Engines

Give your G-Chassis BMW’s engine bay a polished, refined look with Turner’s Carbon Fiber Engine Cover. This direct replacement cover is crafted from hand-laid, gloss-finished carbon fiber, delivering a resilient, UV-protected finish. With an OE-style indentation for the BMW badge, this cover complements your engine bay with a sleek, factory look that stands out.

Engine Cover Highlights:

Direct Fitment: Seamlessly replaces the stock cover, utilizing factory mounting grommets and hardware. Durable Gloss Finish: Ensures long-lasting shine and UV protection. Distinctive Style: A premium upgrade that elevates the aesthetic of your B58 engine. Installation Notes:

Simply transfer the OE grommets and badge from the stock cover to the carbon fiber engine cover for a perfect fit—installation takes seconds!