BMW Suspension Parts

Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not ...

T#:11953

Part#: E9X-REAR-MOUNTS

Ships in 3 Business Days

Sale - Save 14% $ 96.73

This product was last offered at the strikethrough price on
08-14-2026

$ 82.82 USD

Add to Wish List

Qty

Sale - Save 14%

$ 96.73

This product was last offered at the strikethrough price on
08-14-2026

$ 82.82 USD

Add to Wish List

A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

OE Rear Upper Shock Mount Kit w/ Hardware - F3X F2X

T#:639047

Part#: 33506862725KT2

In Stock

Sale - Save 3% $ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Qty

Sale - Save 3%

$ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a OE Lemforder replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Guide Support - This item fits the following BMW Chassis: F22,F30,F31,F32,F33,F36

Show More Show Less

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Front Control Arm Refresh Kit - F22, F23, F30, F31, F32, F33, F36 ...

T#:42099866

Part#: 31126854727TKT

In Stock

Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Qty

Sale - Save 3%

$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Give your BMW the sharp handling it was engineered for with the Front Control Arm Refresh Kit, the perfect solution for a complete front suspension overhaul.

Front Suspension Refresh Kit - F2X, F3X

T#:711928

Part#: 31126852991KT2

Ships on Aug 17, 2026

$ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 490.99 USD

Add to Wish List

Qty

$ 490.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

Show More Show Less

Condor Speed Shop Stackable Rear Spring Pad Set - E30, E36 318ti, Z3 ...

T#:577554

Part#: SPGPAD

Ships in 3 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Designed to replace the stock rubber pads. Use them to adjust the ride height on the rear of your e30, e36 318ti or z3. Each set includes 3 pairs of pads of varying thickness (3.5mm, 5mm & 6mm). Use the thinnest pad for the lowest setting, or stack all 3 to raise the rear almost 15mm.

Show More Show Less

1-series Strut/Shock Mount Kit - E82 128i, 135i

T#:11958

Part#: E82MOUNTKIT

Ships in 3 Business Days

Sale - Save 11% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 150.16 USD

Add to Wish List

Qty

Sale - Save 11%

$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 150.16 USD

Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:

front upper strut mounts (also known as a guide support), 31306775098

A. rear upper-top shock mounts, 33506771737

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33506771738

D. rear upper supporting cup, 33526764418 (sits over bumpstop)

rear lower shock mount (installs on spring arm), 33526768544
Buy as a package and save $!!

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i - Coupe
2008-2012 E88 BMW 128i 135i - Convertible

Show More Show Less

E24 635CSi, E28 528e/535i Bilstein/H&R Sport Suspension Package (M5, ...

T#:401628

Part#: E28SPORT1KT

Ships in 3 Business Days

$ 1,265.99

This product was last offered at the strikethrough price on
08-13-2026

$ 1,138.99 USD

Add to Wish List

Qty

$ 1,138.99 USD

Add to Wish List

This suspension package of Bilstein Sport shocks and H&R Sport springs will lower the ride height and firm up the suspension to provide less bodyroll and better handling. This E24 and E28 suspension package is firm but not harsh and can be used on daily-driven street cars as well as backroad and weekend corner carvers.

H&R Sport springs lower the ride height by 1.25" and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs. The ride quality is a little stiffer than a stock E28 M5.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Although this suspension is listed for the E28 M5 and E24 M6, the original rear self-leveling system must be disabled or removed.

Parts list:

1 set - H&R Sport Springs (50428)
1 pair - Bilstein Front Sport struts (P36-0243 / 34-181546)
1 pair - Bilstein Rear Sport Shocks (B46-0607 / 24-006071)

This item fits the following BMWs:
1982-1988 E28 BMW 528e 533i 535i 535is M5
1982-1989 E24 BMW 633csi 635csi M6

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

T#:11954

Part#: TMS11954

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Shocks and spring Installation Kit - 3 Bolt Top Mount - F22/3 F30/2/3...

T#:553619

Part#: 31306863135KT2

In Stock

$ 611.99

This product was last offered at the strikethrough price on
03-11-2026

$ 564.99 USD

Add to Wish List

Qty

$ 564.99 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

F22/23 228i 228i xDrive M235i M235i xDrive without EDC and production date up 03/2015

F30 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive without EDC and production date up 03/2015

F32/33/36 428i 428i xDrive 435i 435i xDrive

Show More Show Less

E46Xi FRONT CONTROL ARM BRACKET KIT WITH E46 325Xi/330Xi FRONT CONTRO...

T#:401618

Part#: TSU4695PBX/16KT

In Stock

Sale - Save 19% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

Qty

Sale - Save 19%

$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

Show More Show Less

E30 Complete Front & Rear Suspension Rebuild Kit

T#:21735879

Part#: E30SUPRBM1042KT

Ships in 4 Business Days

Sale - Save 8% $ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Experience a new level of comfort and control with our Level 3 Comprehensive Suspension Service for your beloved E30 BMW. Say goodbye to clunks, squeaks, and wandering issues plaguing your vehicle's front and rear ends. We provide an all-in-one solution to address these problems, offering superior performance and durability, ensuring your E30 drives better than ever before. Front-End Upgrades: Lemforder Front Lower Control Arms: Replace worn-out control arms with Lemforder precision-engineered components for enhanced stability and handling. Solid Rubber E36 M3 Front Control Arm Bushings: Improve steering feel and responsiveness with these solid rubber bushings, guaranteeing a more connected driving experience. Lemforder Front Sway Bar End Links: Upgrade your sway bar end links to Lemforder for enhanced durability and reduced play, further enhancing your E30's handling. Sachs Front Strut Mounts: Ensure smooth and controlled ride quality with Sachs front strut mounts, providing improved shock absorption and longevity. Lemforder Inner and Outer Tie Rod Assemblies: Replace your tie rod assemblies with Lemforder precision for precise steering and handling. All Required Retaining Hardware: We include all the necessary hardware to ensure a seamless installation, saving you time and hassle. Rear-End Enhancements: Rear Trailing Arm Bushings: Upgrade your rear trailing arm bushings for improved stability and handling characteristics. Rear Stabilizer Links: Replace worn stabilizer links for better control and reduced body roll during cornering. Upgraded Rear Shock Mounts from the E46 M3: Experience improved ride comfort and handling with upgraded rear shock mounts from the E46 M3. ECS Rear Shock Mount Reinforcement Plates: Ensure the longevity and reliability of your shock mounts with ECS reinforcement plates, protecting against deformation. Rear Shock Mount Hardware and Gasket: We provide all necessary hardware and gaskets to complete the installation seamlessly. Rear Subframe Mounts: Enhance rear-end stability and performance with upgraded rear subframe mounts. Differential Bushing: Improve power delivery and drivetrain response with a new differential bushing.

Show More Show Less

E9X M3 Front Control Arm Upgrade Kit w/ Installation Hardware ...

T#:30430683

Part#: 37142283867EKT2

In Stock

Sale - Save 14% $ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Qty

Sale - Save 14%

$ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

T#:5389743

Part#: 37142283867TMSKT

Ships in 1 Business Day

Sale - Save 15% $ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,124.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,124.84 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

Suspension Reinforcement Kit E36

T#:15777304

Part#: 002478ECS01-KT

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The ECS rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The ECS Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.

Show More Show Less

Coilover Installation Hardware - (3/5/6-Bolt M8)

T#:14684339

Part#: 07119905032TKT

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

All the hardware you need to remove and replace your front and rear suspension with new coilovers.

This Kit includes the following items:

FRONT

Front strut pinch bolts - QTY 2
Front strut pinch bolt nuts - QTY 2
Control arm ball-joint nuts - QTY 4
REAR

Lower shock mounting bolts - QTY 2
Lower shock locking nuts - QTY 2
Upper shock mounting bolts - QTY 6
Shock mounts - QTY 2
Shock pads - QTY 2

Show More Show Less

Lower Front Control Arm Kit - Featuring Turner Motorsport Bushings ...

T#:5416780

Part#: 31126777851TMSKT

Ships on Sep 1, 2026

$ 591.99

This product was last offered at the strikethrough price on
05-13-2026

$ 535.99 USD

Add to Wish List

Qty

$ 535.99 USD

Add to Wish List

The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right Meyle HD control arms with pressed in ball joints Turner 80a poly control arm bushings - pre-installed into the brackets All the necessary mounting hardware

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Rear Chassis Reinforcement Kit

T#:597378

Part#: E36REARCHASSISRK

Ships in 5 Business Days

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

Condor Speed Shop's .125" steel Rear Chassis Reinforcement Kit includes everything you need to reinforce the back half of your chassis. The subframe plates are designed to reinforce the subframe mounting points on the chassis of your e36. This is where cracks usually start to form. You can use these plates to repair a cracked chassis or to prevent cracks from forming and avoid costly repairs. The front mounting point of the rear trailing arm is a known area of failure on track-driven E36s. This is a must-have reinforcement. This 6-piece reinforcement plate kit reinforces the stock pocket bungs to prevent failure. .125 (1/8) inch thick 4 rear subframe reinforcement plates 2 rear trailing arm reinforcement plates *Requires welding, professional installation is recommended.*

Show More Show Less

Strut Mount & Bearing Replacement Kit - F3X

T#:855009

Part#: 31306881929KT2

In Stock

$ 336.99

This product was last offered at the strikethrough price on
03-11-2026

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Rear Upper And Lower Shock Mount Kit

T#:5498488

Part#: 33506767010KT

Ships in 3 Business Days

Sale - Save 11% $ 145.99

This product was last offered at the strikethrough price on
08-14-2026

$ 130.04 USD

Add to Wish List

Qty

Sale - Save 11%

$ 145.99

This product was last offered at the strikethrough price on
08-14-2026

$ 130.04 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts

Show More Show Less

Shocks and spring Installation Kit - E82 E88 E90 E92 E93 Non M ...

T#:553668

Part#: 31306775098KT2

Ships in 3 Business Days

$ 354.42 USD

Add to Wish List

Qty

$ 354.42 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

E82/88 128i 135i

E90/92/93 325i 328i 330i 335i 335is

Show More Show Less

Strut Mount Replacement Kit - F3X Adaptive M Suspension

T#:855013

Part#: 31306881930KT2

In Stock

$ 386.99

This product was last offered at the strikethrough price on
06-08-2026

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

T#:339943

Part#: E46-MY-DIFF

In Stock

$ 88.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster

Show More Show Less

Condor Speed Shop Adjustable Rear Trailing Arm Bushing Kit - E10 E21 ...

T#:578349

Part#: ADJRTAB

Ships in 3 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Designed specifically for those of you who prefer not to weld in toe and camber adjustment plates. If you have a lowered or track prepped BMW then you need this adjustable bushing kit. Condor's bushings feature in-car adjustability for camber and toe of up to +/- 1 degree. Their simple design allows for easy and accurate adjustment using the included stainless steel spanner wrench. Once adjusted, trailing arm bolts lock down the CNC machined center cores firmly in place. Condor's UHMW bushings and hard-coat anodized aluminum center cores will stiffen the rear trailing arms while giving you the benefit of adjustable suspension geometry.

Show More Show Less

Suspension Reinforcement Kit

T#:5416754

Part#: 51717036781TMSKT

In Stock

Sale - Save 16% $ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

Qty

Sale - Save 16%

$ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

Includes RTAB limiter, rear shock tower reinforcement plates and BMW Strut tower plates. If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.

Show More Show Less

OEM TRW Front Upper Control Arm - Right - E82 1M, E9X M3

T#:338043

Part#: 31102283576

In Stock

Starting at $ 88.99 USD

Add to Wish List

Starting at $ 88.99 USD

Add to Wish List

This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

3-series Front and Rear Strut/Shock Mount Kit - E9X Xi AWD

T#:340289

Part#: TMS11957

Ships in 3 Business Days

Sale - Save 9% $ 167.99

This product was last offered at the strikethrough price on
08-14-2026

Starting at $ 153.36 USD

Add to Wish List

Sale - Save 9%

$ 167.99

This product was last offered at the strikethrough price on
08-14-2026

Starting at $ 153.36 USD

Add to Wish List

New mounts should be installed whenever you are replacing the struts and shocks on your E90 and E92 3-series. The mounts keep the cabin isolated from annoying noises and impacts. Just like any other rubber mount, these will go bad over time, which allows more harshness and vibration to the chassis along with clunking noises. Replace them now to avoid doubling the labor charges down the road. When installing new shocks, that is the perfect time to also replace the mounts. There are no special tools required and don't take any extra time!

Included in the Xi Mount Kit:

front upper strut mounts (also known as a guide support), 31336775097 or 31306785962

A. rear upper-top shock mounts, 33506771737

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33506771738

D. rear upper supporting cup, 33526764418 (sits over bumpstop)

rear lower shock mount (installs on spring arm), 33526768544
Buy as a package and save $!! Select the kit that fits the production date of your car below.

This item fits the following BMWs:
2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe

Show More Show Less

Eventuri BMW G8X M2 / M3 / M4 CSL Carbon Strut Brace - Gloss Finish ...

T#:39565572

Part#: EVE-S58-CF-STR

Ships in 3 Business Days

$ 2,195.00 USD

Add to Wish List

Qty

$ 2,195.00 USD

Add to Wish List

Upgrade your BMW G8X M2, M3, or M4 CSL today with the Eventuri BMW G8X M2 / M3 / M4 CSL Carbon Strut Brace - Gloss Finish, and experience enhanced performance, improved handling, and a race-inspired aesthetic under the hood.

Show More Show Less

E30 325e/325i/M3 H&R-Bilstein Sport Suspension

T#:4128

Part#: E30SPORT

Ships on Nov 24, 2026

$ 1,232.75

This product was last offered at the strikethrough price on
04-08-2026

$ 1,089.14 USD

Add to Wish List

Qty

$ 1,089.14 USD

Add to Wish List

If E30 needs a little more pep in the corners, this is an excellent suspension package. H&R Sport springs and Bilstein Sport shocks for the E30 will lower the ride height for an aggressive stance and stiffer springs will improve handling and balance in the corners. This suspension is a favorite among our E30 fans because the car corners better without a punishing ride. Perfect for daily-driven E30s who want to carry more speed through the corners.

H&R Sport springs lower the ride height by 1.25" and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:

1 set - H&R Sport Springs (50406)
1 pair - Bilstein Front Sport strut inserts (P36-0335 / 34-003350)
1 pair - Bilstein Rear Sport Shocks (B36-2027 / 24-020275)

Fitment note: Front strut inserts fit the larger 51mm strut housings. These were standard for all 6-cylinder E30s, all M3, and 1989-1992 318i/is. Other models used a smaller strut housing which requires a different Bilstein insert.

This item fits the following BMWs:
1984-1992 E30 BMW 325e 325es 325i 325ic 325is

Show More Show Less

Shocks and spring Installation Kit - E46 M3 Coupe

T#:553630

Part#: 31332229165KT2

In Stock

Sale - Save 1% $ 662.99

This product was last offered at the strikethrough price on
05-01-2026

$ 653.39 USD

Add to Wish List

Qty

Sale - Save 1%

$ 662.99

This product was last offered at the strikethrough price on
05-01-2026

$ 653.39 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

E46 M3 Coupe

Show More Show Less

Hotchkis Front Adjustable Performance End Link Set - E46 BMW ...

T#:376583

Part#: 25826F

Back Ordered

5% off MSRP $ 289.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 274.99 USD

Add to Wish List

Qty

5% off MSRP

$ 289.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 274.99 USD

Add to Wish List

Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links.

Product Features:

Specifically designed for the BMW E46 3 Series and M3's.
High articulation ball ends for maximum range of motion
Range of Adjustment 11" Shortest, 12" Longest
Optimum end link alignment on lowered cars.
Increased sway bar effectiveness.
Increased end link strength.

Fits the following BMWs:
1999-2006 E46 BMW All Submodels

Show More Show Less

Strut Mount & Bearing Replacement Kit - F3X

T#:855008

Part#: 31306855817KT2

In Stock

Sale - Save 8% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 228.01 USD

Add to Wish List

Qty

Sale - Save 8%

$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 228.01 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Shocks and spring Installation Kit - E46 Non M Coupe & Sedan ...

T#:553609

Part#: 51717036781KT2

In Stock

Sale - Save 7% $ 477.80

This product was last offered at the strikethrough price on
03-24-2026

$ 444.43 USD

Add to Wish List

Qty

Sale - Save 7%

$ 477.80

This product was last offered at the strikethrough price on
03-24-2026

$ 444.43 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a aftermarket suspension on your vehicle.

Fits the following BMW's

E46 323ci 323i 325ci 325i 325xi 328ci 328i 330ci 330i 330xi

Show More Show Less

Turner Front Suspension Refresh Kit - Level 1 - E46 Non-M RWD, Z4 2.5...

T#:582865

Part#: T31122343352KT

In Stock

Sale - Save 27% $ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD

Add to Wish List

Qty

Sale - Save 27%

$ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Front Control Arm Bushings

Show More Show Less

Front Lower Control Arm - Right - E82 1M, E9X M3

T#:338352

Part#: 31102283578X

Ships in 5 Business Days

$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

Starting at $ 102.99 USD

Add to Wish List

Starting at $ 102.99 USD

Add to Wish List

This right/passenger's front lower control arm - also know as a wishbone - 31102283578 . This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2012 E92 BMW M3 Coupe
2008-2012 E93 BMW M3 Convertible

Show More Show Less

MMX Performance Lowering Spring Kit - BMW G42 230i/M240i RWD ...

T#:31656075

Part#: MMR08-1702

Ships in 2 Business Days

$ 332.99 USD

Add to Wish List

Qty

$ 332.99 USD

Add to Wish List

MMX Performance Lowering Springs for the BMW G42 230i strike the ideal balance between sharper handling and a more aggressive stance, all without compromising ride comfort. With a drop of approximately 20mm at the front and 15mm at the rear, the G42 gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in. Lowering the car’s centre of gravity makes a real difference to the way it drives. Body roll is noticeably reduced, turn-in feels sharper, and overall dynamics are greatly improved, all while retaining the comfort and refinement you’d expect from a BMW. Thanks to carefully chosen progressive spring rates, low-speed ride quality remains smooth and, in fact, actually feels more composed around town. But push on and the G42’s chassis comes alive: it feels lighter on its feet, more direct, and properly responsive through the corners. Just what the 230i needed. Visually, the difference is just as striking. The lower ride height gives the car a more aggressive, purposeful stance without being over-the-top. Go any lower or firmer than these, and you risk upsetting the balance, leading to a crashy, unsettled ride. That’s why MMX Springs are engineered specifically to work in harmony with both static and Adaptive M dampers. Features: 20mm front / 15mm rear drop for a sportier stance. Sharpened handling with reduced body roll. Smooth ride quality thanks to progressive spring rates. More responsive chassis feel at higher speeds. Compatible with adaptive & static dampers. No bouncing or crashing – perfectly matched spring rates Premium Metallic Grey finish Direct fit for BMW 230i G42

Show More Show Less

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

E82 128i Rear Sway Bar Parts Kit

T#:180694

Part#: TMS180694

Ships in 1 Business Day

$ 167.99

This product was last offered at the strikethrough price on
05-07-2026

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

The non-Sport E82 128i did not come with a rear sway bar. If you're adding the Sport package bar or another aftermarket type you will need this additional package of mounting parts and rear swaybar links to complete the install. This package includes:

rear sway bar bushing brackets, 33556780707
bracket mounting screws, 07119907125
rear sway bar links, 33556764428
lower link mounting bolts, 07119903931
upper link mounting nuts, 33326768884

This kit also makes a nice package as part of a rear suspension overhaul.

This item fits the following BMWs:
2008-2012 E82 BMW 128i without sport package

Show More Show Less

Cup Kit/Coilover Installation Kit - With Spring Pads (5-Bolt M8) ...

T#:6683664

Part#: 313068819291KT

In Stock

$ 673.99

This product was last offered at the strikethrough price on
03-11-2026

$ 626.99 USD

Add to Wish List

Qty

$ 626.99 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Turner Front Suspension Refresh Kit - Level 1 - E90/91/92 325/328/330...

T#:582866

Part#: T31126768989KT

Ships in 1-2 days

Sale - Save 16% $ 514.26

This product was last offered at the strikethrough price on
02-27-2026

$ 432.79 USD

Add to Wish List

Qty

Sale - Save 16%

$ 514.26

This product was last offered at the strikethrough price on
02-27-2026

$ 432.79 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Front Control Arm Bushings
Front Sway Bar End Links & Bushings
Front Ball Joints
New Hardware

Show More Show Less

Front Control Arm Bracket Kit - E30, E36, Z3

T#:343068

Part#: TSU9995PB3KT

In Stock

Sale - Save 18% $ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD

Add to Wish List

Qty

Sale - Save 18%

$ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD

Add to Wish List

Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Suspension Installation Kit - E9x X-drive

T#:5403281

Part#: 31306775098TMSKT

Ships in 3 Business Days

Sale - Save 4% $ 382.99

This product was last offered at the strikethrough price on
08-14-2026

$ 366.87 USD

Add to Wish List

Qty

Sale - Save 4%

$ 382.99

This product was last offered at the strikethrough price on
08-14-2026

$ 366.87 USD

Add to Wish List

Everything you need to install coilovers, shocks/struts, or a cup kit on your BMW. Don't let weak mounts and corroded hardware yield less-than-positive results!If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job. Kit includes: - 2 front strut mounts with hardware - 2 front bump stops - 2 rear strut mounts with hardware - 2 rear bump stops

Show More Show Less

M3/1M Front and rear Control Arm Upgrade Kit

T#:557628

Part#: 33322283547KT9

Ships in 5 Business Days

Sale - Save 12% $ 966.99

This product was last offered at the strikethrough price on
03-13-2026

$ 852.47 USD

Add to Wish List

Qty

Sale - Save 12%

$ 966.99

This product was last offered at the strikethrough price on
03-13-2026

$ 852.47 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less