BMW Suspension Parts

If you are looking for a wider range of camber adjustability in the rear of you car, the IRP Adjustable rear lower control arm is exactly what you need! Built to be much stronger than stock, these rear control arms feature inner monoball bushings and are built of steel, reducing the weight as well. These are perfect for a lowered car or for a track car that needs a greater level of rear adjustment.

Features:

• Strong Steel Construction
• Adjustable
• Painted Yellow For Corrosion Protection
• Weight Reduction
• Monoball Inner Mount

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension. 

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 80A durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 80A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.

Termed as a guide mount or front strut support, this vital component might be the source of those troublesome suspension noises such as squeaks or clunks as it wears over time. Serving for both passenger and driver sides, this mount attaches to the top of the strut, revealing the end thread when the spring and strut are compressed and locked. Professional installation is recommended. Compatible with EDC/DDC (Electronic Dampening Control) systems. FEBI, renowned as an OEM supplier, guarantees quality and compatibility.

Benefits:

• Reduces suspension noise (squeaks, clunks)
• Compatible with both passenger and driver sides
• Works with EDC/DDC systems
• Provided by FEBI, an OEM supplier

**For vehicles with stock style springs**

When looking to dial in your steering geometry and alignment for reduced tire where and/or better track handling, the stock suspension is quite limited. To fix this, you can install Camber/Caster plates such as these plates from IRP. Camber/Caster plates allow for adjustment of the top position of the shock's mounting position. These slight adjustments have a huge impact on the stance of the of the wheel when driving straight down the road and when turning into a corner. With simple adjustments, you can increase the grip of the tires in hard turns, improve tread life, or even just make an alignment correction for a vehicle with a lowered ride height. 

The IRP Camber Caster plates are made of an aircraft grade aluminum body, for strength and low weight, with an adjustable mounting plate that utilizes a steel monoball mounting point. This makes the plate resistant to corrosion and prevents deformation even with the stiffest shocks and springs.

Features:

• Decreased understeer
• Decreases outside edge tire wear
• Aircraft Grade Aluminum Construction
• Steel Monoball and Mounting Sleeves

Fits the following BMWs:
1991-1999 E36 BMW

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides. 

The IRP adjustable strut brace bar is a high quality brace that is constructed of 100% steel for guaranteed reinforcement and prevention of flex. The brace bar is painted black to ensure corrosion protection and to add to the looks of the engine bay.

Easily installed with basic hand tools.

Fits the following BMW chassis:
E46 BMW All Submodels

M7 Strut Reinforcement Plates 53-510101 are the ultimate solution for MINI owners facing the common issue of strut tower mushrooming caused by heavy impacts from shocks and low aspect ratio tires. Over time, MINI's shock towers can develop a convex shape, disrupting suspension alignment and leading to a noticeable pull to one side. The M7 Strut Reinforcement Plates (SRPs) address this problem by reinforcing the sheet metal and shock top plate, creating a durable surface that resists bending, even during hard impacts.

Designed specifically for the R50 Base Model Cooper, the R52 Convertible, and the R53 Cooper S, these SRPs are an essential upgrade for any MINI enthusiast. Constructed from CNC machined billet aluminum and black anodized for durability, the 1/2" (13mm) thick plates cover the entire surface of the strut tower, distributing loads evenly and providing peace of mind.

Whether you drive your MINI daily or push it to the limits on the track, M7 Strut Reinforcement Plates offer a cost-effective preventative measure against expensive suspension repairs. Easy to install in less than 20 minutes, the SRPs use the stock nuts for mounting and come with instructions that also guide you through fixing existing mushrooming.

• Prevents strut tower mushrooming
• Constructed from CNC machined billet aluminum
• Black anodized for long-lasting durability
• Covers the entire strut tower surface
• Designed for R50, R52, and R53 MINI models
• Easy installation with stock nuts
• Made in the USA