BMW Suspension Parts

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

• Threaded body adjustable range of 20 mm
• Lowering of approx. 30-50 mm at front and rear
• Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
• Aluminum Spring plates and lock nuts
• Surface coating using Triple-C-Technology for long-lasting corrosion resistance
• Round threads for easy adjustment
• Quality sport springs made from highly durable material
• Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

This coilover kit fits the following BMWs:
2013+ F30/34 BMW 320i 328i/d 335i 330i 340i - xDrive models
2014+ F32/36 BMW 428i 435i 430i 440i - xDrive Coupes/Grand Coupes

​

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This item fits the following BMWs:
2001-2006 E46 BMW M3

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

• Precise response and excellent driving performance
• Springs and shocks road tested and fine-tuned to complement one another
• Bilstein Monotube/Inverted gas pressure technology
• TUV certified
• Made In Germany
• Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1991-1997 E31 BMW 840Ci 850Ci/i

Upgrade your E46 Non-M with the ECS Tuning Performance Coilover System, meticulously designed for daily drivers seeking enhanced performance without sacrificing comfort. These coilovers provide a smooth and comfortable ride similar to stock setups while delivering an aggressive aesthetic and significantly improved handling at a fraction of the cost.

Key Features:

• Performance Coilover System:
  • Sport-tuned, height, damping, and body adjustable suspension
  • High-quality materials and coatings for enhanced performance
  • Perfect ride height*
  • Spring Rates: Front 8kg/mm, Rear 10kg/mm
  • *May require adjustable shorter end links depending on fitment or desired ride height.

Performance Features:

• 32 levels of rebound damping adjustment
• Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
• Lowered ride height improves handling by lowering the center of gravity
• Adjustable front bodies maintain correct spring pre-load
• Adjustable front and rear bodies ensure shock operates in the correct valving range, regardless of ride height

Product Design:

• Strut and shock bodies finished with a durable gloss black powder coat
• Threaded portions clear zinc coated for optimum corrosion protection
• Coil springs powder-coated in Reflex Silver Metallic for durability
• Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
• Integrated bump stops for added protection

Upgrade further with the Turner Motorsport Control Arm Monoball Upgrade with housings (FCAB). Stock rubber front control arm bushings, while maximizing daily comfort, fall short for performance and racing enthusiasts. The Turner solution offers a no-compromise design, providing instantaneous cornering and braking response without modification.

Key Features:

• Bearing:
  • Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static)
• Housing:
  • 6061-T6, anodized housing with needle grease zerk for easy maintenance
  • In-house designed knurled OD for a perfect fit across housing diameters
• Bearing Insert Arm Adapter:
  • Precision CNC machined Delrin for a tight fit between the bearing and the control arm
• Performance:
  • Instant, crisp steering and braking response
  • Easy maintenance with long-lasting performance
  • Improved road feel without undesirable NVH
  • Grease before installation and with each oil service using high-quality Moly grease for maximum service life. Grease fitting tool - ES#3410138 or complete kit - ES#3411244.

Ensure your E46 delivers optimal handling and braking performance with these essential upgrades.

The B16 PSS9 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS9 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS9. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This coilover kit fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic

Unveiling the BMW Coilover Line, meticulously crafted for the daily driver's needs. Engineered to elevate performance, aesthetics, and comfort, these coilovers offer a perfect blend of firmness and compliance. With 32 levels of damping and height adjustments tailored to each car, they deliver an aggressive look and significantly enhanced handling.

Key Features:

• ECS Tuning Performance Coilover System:
  • Sport-tuned, height, damping, and body adjustable suspension
  • 32 levels of rebound damping adjustment
  • Adjustable front sway bar end links
  • Integrated camber plates for +/-1.5 degrees of adjustment
  • Lowering adjustment of 1.5" - 4"
  • Heat-treated, progressive rate coil springs (8k Front, 10K Rear)
  • Zinc-coated threaded portions for corrosion protection
  • Powder-coated Reflex Silver Metallic finish on coil springs
  • Red anodized, billet aluminum spring seats with locking collars
  • Anodized adjustable sway bar end links with heavy-duty bushings
  • Zinc-coated flanged nuts for shock & strut shaft pins
  • Rear shock adjuster housings black E-coated for durability
  • Integrated bump stops and dust boots

Turner Performance Adjustable Rear Toe Links:

Enhance stability and response with Turner's Performance Rear Toe Links. These links eliminate bushing deflection, providing increased rear toe adjustment crucial for lowered cars or performance alignments. With gun-drilled 2024 Aluminum center links, rotating clamp design, and low-friction Teflon-lined FK Heim joints, this pair ensures superior strength, durability, and ease of adjustment. A must-have for optimal grip on the track and extended tire life on the street.

Elevate the performance of your E36 M3 with the ECS Tuning Performance Coilover System. This sport-tuned suspension offers adjustable height, damping, and body settings, providing substantial performance benefits. Crafted with high-quality materials and coatings, it replaces worn suspension components while achieving the ideal ride height.

• Spring Rates: Front 6kg/mm, Rear 8kg/mm
• Performance Features:
  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling performance
  • Adjustable front bodies for personalized ride height and correct spring pre-load
• Product Design:
  • Durable gloss black powder coat on strut and shock bodies
  • Clear zinc-coated threaded portions for corrosion protection
  • Reflex Silver Metallic finish on powder-coated coil springs
  • Red anodized billet aluminum lower spring seats with locking collars
  • Integrated bump stops

Revitalize your E30/E36 with the FCAB and pre-installed monoball upgrade. This front control arm bushing replacement offers precise, predictable handling without the harshness of solid bushings. Greaseable and serviceable, it enhances performance without sacrificing daily driving comfort.

• Stock vs. Upgrade:
  • Stock rubber bushings designed for comfort, not optimal performance
  • Poly and delrin bushings compromise handling and wear prematurely
• Turner Front Control Arm Spherical Bearings:
  • Greaseable spherical bearing for improved precision and durability
  • 6061-T6 anodized housing with needle grease zerk for easy maintenance
  • Precision CNC machined Delrin arm adapter for a tight fit
• Performance Benefits:
  • Instant, crisp steering and braking response
  • Easy maintenance with long-lasting performance
  • Improved road feel without undesirable NVH

Ensure optimal performance with Turner's Front Control Arm Spherical Bearings – a must-have for track enthusiasts and a great upgrade for spirited driving on the streets.

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This coilover kit fits the following BMWs:
2014+ F22 BMW 228xi M235xi - Not for cars with EDC
2012+ F30 BMW 320xi 328xi 335xi - Sedan - Not for cars with EDC
2013+ F32 BMW 428xi 435xi - Coupe - Not for cars with EDC
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 428i xDrive Gran Coupe 435i xDrive Gran Coupe