Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:11986
Part#: E9X-URSM
In Stock
Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
Fall Line - Corporate Logo
T#:27938407
Part#: FLM-G8X-1FECOTOE
In Stock
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

  • Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
  • Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
  • Simplified Setup: Eases camber adjustment and simplifies alignment processes.
  • Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
  • Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

  • G80 / G81 / G82 / G83 M3 & M4
  • F80 / F82 M3 & M4
  • G87 M2
  • F87 M2
Show More Show Less

Whiteline - Corporate Logo
T#:26938502
Part#: KDT919
In Stock
$ 96.99 USD
Free Shipping on orders $49 and up
After thorough development and material testing aimed at achieving strength, durability, geometry retention, and memory without compromising comfort, WHITELINE has introduced a progressive, long-chain Synthetic Elastomer. This groundbreaking material combines the advantages of solid bushings with the flexibility characteristics of rubber, striking an optimal balance between performance and comfort.
Show More Show Less

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Whiteline - Corporate Logo
T#:558797
Part#: W61923
In Stock
$ 77.99 USD
Free Shipping on orders $49 and up

Optimize rear suspension geometry with Whiteline suspension bushings. Often overlooked, Whiteline trailing arm bushings offer superior dynamic alignment precision by controlling excessive movement - providing driver reassurance for more predictable handling.

Features:

  • Performance - Whiteline's engineered "Synthetic Elastomer" bushings feature the quality ride of rubber at lower speeds and at higher speeds react when under cornering, accelerating and braking loads, for CHASSIS CONTROL and improved handling.
  • Durable - The advanced synthetic elastomer characteristics ensure superior elasticity, memory and outright durability for all forms of driving applications!
  • Resistant - Whiteline's synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering
  • Lubricant - Supplied with extreme pressure molybdenum disulphide (LM) based grease (where required) for extended life.
  • Installer Friendly - Designed with the installer in mind by reducing the need of specialized skills, tools and equipment.
  • Black - The neutral (black) appearance favored by restorers and racers.
  • Lifetime Warranty - All Whiteline bushing kits are backed by a lifetime warranty
Show More Show Less

Fall Line - Corporate Logo
T#:5580987
Part#: FLM-F87-1BFLINK
Ships in 10 Business Days
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

  • Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
  • Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
  • Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
  • Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
  • Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.
Show More Show Less
Whiteline - Corporate Logo
T#:379440
Part#: W63400
In Stock
$ 86.99 USD
Free Shipping
$ 86.99 USD
Free Shipping

These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.

Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.

Show More Show Less

Whiteline - Corporate Logo
T#:558800
Part#: KDT918
Ships in 3 Business Days
$ 60.99 USD
Free Shipping on orders $49 and up

Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

Features:

  • Performance - Whiteline's engineered "Synthetic Elastomer" bushings feature the quality ride of rubber at lower speeds and at higher speeds react when under cornering, accelerating and braking loads, for CHASSIS CONTROL and improved handling.
  • Durable - The advanced synthetic elastomer characteristics ensure superior elasticity, memory and outright durability for all forms of driving applications!
  • Resistant - Whiteline's synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering
  • Lubricant - Supplied with extreme pressure molybdenum disulphide (LM) based grease (where required) for extended life.
  • Installer Friendly - Designed with the installer in mind by reducing the need of specialized skills, tools and equipment.
  • Black - The neutral (black) appearance favored by restorers and racers.
  • Lifetime Warranty - All Whiteline bushing kits are backed by a lifetime warranty
Show More Show Less

Whiteline - Corporate Logo
T#:372193
Part#: KSB536
Ships in 1 Business Day
$ 182.88 USD
Free Shipping on orders $49 and up
BMWs need some added chassis strengthening in the front for best potential handling. Whiteline has the solution with a stylish polished aluminum strut brace that offers easy installation and increases chassis rigidity.

This part fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
Show More Show Less
Fall Line - Corporate Logo
T#:20979735
Part#: F8X/E9X-1FLCOCA
Ships on Sep 4, 2026
$ 995.00 USD
Free Shipping
$ 995.00 USD
Free Shipping
*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs
Show More Show Less
Whiteline - Corporate Logo
T#:362706
Part#: BBR44
Ships in 3 Business Days
$ 274.99

This product was last offered at the strikethrough price on
08-13-2026

$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping

Sway bars are an essential upgrade when trying to get the best handling capabilities out of your BMW. Stock sway bars allow for too much play and excessive body roll, not keeping the wheels as firmly planted as they should be. Whiteline offers their performance sway bar kits that are designed to improve your BMW's handling characteristics and come with upgraded polyurethane bushings as well.

This Whiteline 20mm sway bar gives you more grip, better handling, and better outright performance. Sway bar upgrades are one of the best dollar-for-dollar investments you can make, improving your BMW's handling dynamics without affecting the comfort or ride quality.

This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2007- 2013 E88 1 Series Convertible 128i 135i
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009-2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi 
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

 

Show More Show Less


Whiteline - Corporate Logo
T#:372192
Part#: BBR38Z
Ships in 1-2 days
$ 300.99 USD
$ 300.99 USD

Sway bars are an essential upgrade when trying to get the best handling capabilities out of your BMW. Stock sway bars allow for too much play and excessive body roll, not keeping the wheels as firmly planted as they should be. Whiteline offers their performance sway bar kits that are designed to improve your BMW's handling characteristics and come with upgraded polyurethane bushings as well.

This Whiteline 22mm sway bar gives you more grip, better handling, and better outright performance. Sway bar upgrades are one of the best dollar-for-dollar investments you can make, improving your BMW's handling dynamics without affecting the comfort or ride quality.

This part fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is 

Show More Show Less
Fall Line - Corporate Logo
T#:28038181
Part#: FLM-G8X-1BLCABO
Ships in 1 Business Day
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Experience championship-caliber performance with Fall-Line's Lower Control Arm Bearings, proudly Made in the USA. From years of competitive racing, Fall-Line is synonymous with producing top-tier suspension components that excel on the track. The weak link in the latest M Cars' rear camber arms is the rubber bushings, but Fall-Line's new lower control arm bearings offer a game-changing solution. This SKU replaces OEM BMW Part number: 33326792553 Key Features: Designed for all G8X and F8X M cars DMG Mori 5-Axis CNC machined for precision Full stainless bearing assembly including hats, bearings, housing, and spiral locks Sold in pairs; designed to replace the rear control/camber arm outer bearings (BMW Part Number: 33-32-6-792-553) By eliminating rubber from this critical feedback area, Fall-Line provides control over the tire's behavior and confidence behind the wheel at the limit. These bearings feature the largest FK spherical bearings on the market, ensuring strength and longevity even under competition-level loads. Stainless steel spiral locks offer 360 degrees of clamping force, securing the bearing from any potential movement. As a bonus, these spherical bearings outlast OEM rubber variants, eliminating the headache of repeated replacements over your ownership. Please note that, as with any elimination of suspension bushings, there may be a slight increase in noise, vibration, and harshness after installation. Upgrade your suspension with Fall-Line's Lower Control Arm Bearings and take your driving experience to the next level. Invest in championship-level performance with Fall-Line, the trusted name in motorsport.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:637422
Part#: BMSG20BSCB-BLUE
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less

Whiteline - Corporate Logo
T#:558799
Part#: KLC163
Ships in 3 Business Days
$ 167.99 USD
Free Shipping on orders $49 and up

Links are a common service item due to either worn or over compliant joints and possibly bent or snapped center bodies. Upgrade from the old units to Whiteline sway bar links with superior features that outlast and outperform the original equipment.

The threaded center rod allows for precise adjustment and can be cut to a needed length for precise suspension tuning.

Show More Show Less

Fall Line - Corporate Logo
T#:27938406
Part#: FLM-G8X-1BUNI
Ships in 1 Business Day
$ 395.00 USD
Free Shipping
$ 395.00 USD
Free Shipping
Upgrade your BMW's front suspension with our premium Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. This kit offers an advanced spherical bearing conversion, enhancing the performance of the bushing found within OEM BMW Part number: 31-10-8-095-668. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the car is put through its paces Made in the USA! Key Features: Spherical bearing conversion kit designed for precision and performance. Enhanced control and steering response without compromising ride comfort. Directly compatible with OEM BMW Part number: 31108095668. Perfectly complements G8X M3 and M4 models. Crafted with premium materials for long-lasting durability. Ideal for enthusiasts seeking improved handling during aggressive driving and track use. Take your BMW's performance to the next level with the Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. Elevate your driving experience today with this high-quality upgrade. Get yours now and experience the difference!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:637421
Part#: BMSG20BSCB-RED
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less

Fall Line - Corporate Logo
T#:28038192
Part#: FLM-F8X-G8X-1BRL
Ships in 1 Business Day
$ 198.00 USD
Free Shipping
$ 198.00 USD
Free Shipping
Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair
Show More Show Less
Fall Line - Corporate Logo
T#:28038203
Part#: FLM-E9X-1FRTAK
Back Ordered
$ 449.99 USD
Free Shipping
$ 449.99 USD
Free Shipping

Burger Motorsports - Corporate Logo
T#:39126850
Part#: BMSBILSCB-BLU
In Stock
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less

KMAC - Corporate Logo
T#:389667
Part#: 193926K
In Stock
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less
KMAC - Corporate Logo
T#:389661
Part#: 193616-1J
Ships on Sep 11, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
Show More Show Less
Whiteline - Corporate Logo
T#:372620
Part#: BBR36Z
Ships in 3 Business Days
$ 316.99 USD
$ 316.99 USD

Sway bars are an essential upgrade when trying to get the best handling capabilities out of your BMW. Stock sway bars allow for too much play and excessive body roll, not keeping the wheels as firmly planted as they should be. Whiteline offers their performance sway bar kits that are designed to improve your BMW's handling characteristics and come with upgraded polyurethane bushings as well.

This Whiteline 16mm sway bar gives you more grip, better handling, and better outright performance. Sway bar upgrades are one of the best dollar-for-dollar investments you can make, improving your BMW's handling dynamics without affecting the comfort or ride quality.

This part fits the following BMWs:
1982 - 1991 E30 318i 318is 325 325e 325es 325i 325is 325iC 325ix

Show More Show Less


Whiteline - Corporate Logo
T#:372180
Part#: KSB557
In Stock at Vendor
$ 228.99 USD
Free Shipping
$ 228.99 USD
Free Shipping

BMWs need some added chassis strengthening in the front for best potential handling. Whiteline has the solution with a stylish polished aluminum strut brace that offers easy installation and increases chassis rigidity.

This part fits the following BMWs:
1999-2006 E46 ALL

Show More Show Less
Alta Performance - Corporate Logo
T#:26404877
Part#: AMPSUS400
In Stock at Vendor
$ 168.99 USD
Free Shipping on orders $49 and up

Upgrade your Mini's suspension with ALTA Adjustable Front Endlinks for the R55, R56, R57, R58, and R59 models. These endlinks allow for precise adjustment, optimizing your vehicle's handling and performance. Crafted with durability in mind, they offer enhanced stability and control, especially during aggressive driving. Installation is straightforward, making it easy to achieve the perfect setup for your Mini.

  • Enhances suspension performance
  • Allows for precise adjustment
  • Improves handling and stability
  • Durable construction for long-lasting reliability
  • Easy installation process
Show More Show Less
Whiteline - Corporate Logo
T#:26538301
Part#: W53518
In Stock
$ 133.99 USD
Free Shipping on orders $49 and up
Following meticulous development and material testing focused on strength, durability, geometry retention, and memory while maintaining comfort, WHITELINE has engineered a progressive, long-chain Synthetic Elastomer. This pioneering material merges the advantageous properties of solid bushings with the flexibility of rubber.
Show More Show Less

Whiteline - Corporate Logo
T#:372857
Part#: W62384
Ships in 3 Business Days
$ 118.99 USD
Free Shipping on orders $49 and up

These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.

Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.

Show More Show Less

Burger Motorsports - Corporate Logo
T#:637424
Part#: BMSG20BSCB-BLK
Ships in 7 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Whiteline - Corporate Logo
T#:31556148
Part#: KLC232
Ships in 3 Business Days
$ 167.99 USD
Free Shipping on orders $49 and up

Fall Line - Corporate Logo
T#:28038216
Part#: FLM-E9X-1FECOTOE
In Stock at Vendor
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The standard toe link kit by Fall Line Motorsports is designed to simplify toe changes at an alignment facility while still keeping cost reasonable. The standard toe link kit keeps costs down by using a traditional jam nut design in a sturdy billet arm. Adjustable threaded rod ends turn into and out of the arm for a wide range of toe adjustment, and enable an alignment technician to easily set toe on a lowered car.
Show More Show Less
Whiteline - Corporate Logo
T#:39329338
Part#: BBR44Z
Ships in 3 Business Days
$ 264.99 USD
$ 264.99 USD
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline sway bar increases grip, increased grip equals better handling, and better handling equals better outright performance. It's the best dollar-for-dollar handling improvement you can make to your vehicle. Benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Show More Show Less

Fall Line - Corporate Logo
T#:5580972
Part#: FLM-E9X-1BLCABO
Ships in 3 Business Days
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less

KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Ships on Sep 11, 2026
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
KMAC - Corporate Logo
T#:388807
Part#: 195116-1J
Ships on Sep 11, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
3/2002-2006  R50 MINI  MINI Cooper
2005-2008  R52 MINI  MINI Cooper Convertible, MINI Cooper S Convertible.
3/2002-2006  R53 MINI  MINI Cooper S
Show More Show Less
Fall Line - Corporate Logo
T#:5580971
Part#: F8X-1BLCASB
Back Ordered
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less


Alta Performance - Corporate Logo
T#:23284094
Part#: AMPSUS310
Back Ordered
$ 283.99 USD
Free Shipping on orders $49 and up
Elevate your BMW's handling prowess with ALTA Sway Bars, meticulously crafted from solid steel using state-of-the-art precision bending equipment. These sway bars come with a durable powder-coated finish, offering robust corrosion resistance and a striking deep red appearance. With laser-cut and MIG welded bar ends, ALTA ensures superior precision and strength, setting them apart from competitors. The multiple endlink mounting holes allow customization of stiffness, providing up to a 400% increase over stock by adjusting the endlink position. ALTA Sway Bars feature centering rings to prevent sway bar movement during aggressive cornering, ensuring consistent performance. The inclusion of polyurethane bushings ensures a responsive feel and enhanced turn-in, with specially designed pockets to retain grease for extended maintenance intervals.
Show More Show Less
KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
Special Order: No Guaranteed ETA
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less

Whiteline - Corporate Logo
T#:26638232
Part#: W23394
Ships in 3 Business Days
$ 25.99 USD
Free Shipping on orders $49 and up
After extensive development and material testing focused on delivering strength, durability, geometry retention, and memory while maintaining comfort, WHITELINE has introduced a progressive, long-chain Synthetic Elastomer. This groundbreaking material merges the advantageous properties of solid bushings with the flexibility of rubber, resulting in improved performance attributes.
Show More Show Less

Fall Line - Corporate Logo
T#:5580964
Part#: E9X-1BRLINK
In Stock
$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD
Limited Qty Sale
Free Shipping
$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD
Limited Qty Sale
Free Shipping
Adjustable sway bar end links are an absolutely critical component for anyone who is serious about extracting the best possible handling from their M car. By varying the length of each link slightly, the alignment technician can ensure that the sway bar is completely unloaded and unstressed at static ride height, giving the car excellent chassis dynamics and truly even corner balance.
Show More Show Less

Whiteline - Corporate Logo
T#:27171926
Part#: BBF44Z
In Stock
$ 288.99 USD
$ 288.99 USD
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline sway bar increases grip, increased grip equals better handling, and better handling equals better outright performance. It's the best dollar-for-dollar handling improvement you can make to your vehicle. Benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Show More Show Less
Alta Performance - Corporate Logo
T#:754312
Part#: AMPSUS100
In Stock at Vendor
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping

ALTA Rear Control Arms are the ultimate upgrade for your MINI, replacing your rear lateral links with a solid and performance-focused design. These control arms enhance traction and handling while giving you precise control over camber and toe settings. The flexibility of ALTA control arms allows for fine-tuning without the hassle of removing and reinstalling the linkage. Simply adjust the lock nuts and twist the center section to achieve your desired settings.

These control arms are the perfect complement to other suspension products like springs, coilovers, or sway bars.

Key Features of ALTA Rear Control Arms:

  • CNC machined from 6061 aluminum rod for durability.
  • Heavy texture powder coating for corrosion resistance and added style.
  • Teflon-lined spherical rod ends for a solid connection and improved articulation.
  • Aircraft-quality spherical bearings for smooth and precise movement.
  • Injected Nylon around the ball center for quiet operation as the part ages.

For a comprehensive rear end upgrade, consider purchasing two sets of control arms to replace both upper and lower control arms. This minimizes deflection from the OEM rubber bushings and reduces weight. Please note that on models with Xenon-style headlamps, some modifications to the leveling sensor mounting may be necessary. For additional details, consult your ALTA dealer or our Tech Department.

ALTA Rear Control Arms come with high-quality hardware, including corrosion-resistant spacers and Grade 8 adjustment nuts.

Show More Show Less

Whiteline - Corporate Logo
T#:372178
Part#: BBF15Z
In Stock at Vendor
$ 377.99 USD
$ 377.99 USD

Sway bars are an essential upgrade when trying to get the best handling capabilities out of your BMW. Stock sway bars allow for too much play and excessive body roll, not keeping the wheels as firmly planted as they should be. Whiteline offers their performance sway bar kits that are designed to improve your BMW's handling characteristics and come with upgraded polyurethane bushings as well.

This Whiteline 30mm sway bar gives you more grip, better handling, and better outright performance. Sway bar upgrades are one of the best dollar-for-dollar investments you can make, improving your BMW's handling dynamics without affecting the comfort or ride quality.


This part fits the following BMWs:
2001 - 2006 E46 M3

Show More Show Less

Whiteline - Corporate Logo
T#:26538354
Part#: BBK001
In Stock
$ 622.99 USD
Free Shipping on orders $49 and up
Formulated to "Activate More Grip," BBK001 offers a holistic solution meticulously designed to enhance performance and elevate your vehicle's driving dynamics. Equipped with a 27mm 3-point adjustable front sway bar and a 22mm 2-point adjustable rear sway bar, the kit comes complete with front and rear sway bar links and mounting accessories, guaranteeing effortless installation and peak performance. Achieve perfect balance and meticulous tuning with the Whiteline Sway Bar Kit.
Show More Show Less
Fall Line - Corporate Logo
T#:5580939
Part#: FLM-F8XWUAK
In Stock
$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD
Limited Qty Sale
Free Shipping
$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD
Limited Qty Sale
Free Shipping
These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine-tuning within the full-suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.
Show More Show Less
Whiteline - Corporate Logo
T#:377430
Part#: KCA430
Ships in 3 Business Days
$ 115.99 USD
Free Shipping on orders $49 and up
$ 115.99 USD
Free Shipping on orders $49 and up

These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.

Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.

Show More Show Less