5100 Series AST Coilovers - MINI F55 F56 F57

T#:26171671

Part#: ACU-B1402S

Back Ordered

$ 3,213.00 USD

Add to Wish List

Qty

$ 3,213.00 USD

Add to Wish List

5100 Series Shock Absorbers for MINI

Enhance your MINI's performance with the 5100 Series shock absorbers, featuring innovative inverted/upside-down technology. These shock absorbers utilize race-proven design to provide exceptional strength and improved suspension geometry, ensuring optimal performance on both road and track environments. With the 5100 Series suspension, enjoy better performance than standard twin-tube designs, thanks to its adjustability and rebound control. The Monotube design separates oil and nitrogen, allowing for a larger piston and increased damper performance. This results in enhanced grip, control, and driver feedback. Additionally, the set includes front top mounts and is rebuildable for long-term use.

Benefits:

Enhanced performance compared to standard twin-tube designs
Innovative inverted technology for better suspension geometry
Adjustable rebound for personalized driving experience
Monotube design increases damper performance and sensitivity
Rebuildable set for long-term durability

Show More Show Less

5100 Series AST Coilovers

T#:27205370

Part#: ACU-B1301S

Back Ordered

$ 2,586.99 USD

Add to Wish List

Qty

$ 2,586.99 USD

Add to Wish List

AST 5200 Series Coilovers - E9X M3

T#:24643799

Part#: RIV-B1603SD

Back Ordered

$ 6,010.00 USD

Add to Wish List

Qty

$ 6,010.00 USD

Add to Wish List

AST 5300 Series Coilovers - 2021+ BMW M3 G80 / M4 G82

T#:29898448

Part#: RAC-B2112SD

Back Ordered

$ 8,127.00 USD

Add to Wish List

Qty

$ 8,127.00 USD

Add to Wish List

Are you the most dedicated enthusiast on the race track? Elevate your racing game to a championship level with the AST 3-WAY MOTORSPORT SUSPENSION. This advanced system empowers you to challenge your vehicle by independently adjusting rebound and low- and high-speed compression with a remote reservoir, providing distinct feedback and a unique driving sensation with each setting. ### Key Features: **Inverted Strut Design:** Built to withstand heavy side loads and braking forces, ensuring peak performance under intense conditions. **MONOTUBE Coilover Design:** Both front and rear dampers utilize this design, offering consistent performance and superior heat dissipation. **Adjustable Spring Rates:** Allows you to fine-tune your vehicle's suspension to meet your specific needs. **Rebound Adjustment:** With 12 distinct positions, you can control the damper's return to extension, affecting how the vehicle responds after compression and providing a unique driving experience with each setting. **Compression Adjustment:** Customize the suspension's response to compression with separate low- and high-speed controls: - **Low-Speed Compression:** Manages the suspension’s reaction to gentle, gradual forces. - **High-Speed Compression:** Handles rapid, forceful impacts. ### Benefits: - **Improved Handling:** Adjusting rebound and compression settings helps reduce body roll during cornering, enhancing responsiveness and maintaining tire contact for better traction. - **Customized Ride Comfort:** Fine-tune compression adjustments to balance performance and comfort, tailoring the ride quality to your preferences. - **Enhanced Front-End Grip:** Camber-adjustable front top mounts provide more wheel adjustment, transforming front-end grip and offering better control over your vehicle’s geometry. ### Additional Features: - **Solid Rear Top Mounts:** Ensure durability and stability under demanding conditions. With the AST 3-WAY MOTORSPORT SUSPENSION, you can fine-tune and customize three critical aspects of your vehicle's suspension, transforming your driving experience and elevating your performance. Designed for the most dedicated racing enthusiasts, this suspension system excels on both the road and the track.

Show More Show Less

AST 5300 Series Coilovers - E9X M3

T#:24643800

Part#: RAC-B1603SD

Back Ordered

$ 7,209.00 USD

Add to Wish List

Qty

$ 7,209.00 USD

Add to Wish List

Front Drop Links - Set 258mm to 276mm

T#:31522875

Part#: DLA-MINF-S

Back Ordered

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

AST 2016-2021 BMW M2 F87 / Competition LCI 5200 Series Coilovers ...

T#:38621397

Part#: RIV-B2104SD

Back Ordered

$ 6,714.00 USD

Add to Wish List

Qty

$ 6,714.00 USD

Add to Wish List

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

BMW F8X M2 M3 M4 Chassis Bracing

T#:4070463

Part#: F-BRACE

Ships in 1 Business Day

$ 99.00

This product was last offered at the strikethrough price on
02-23-2026

$ 94.00 USD

Add to Wish List

Qty

$ 94.00 USD

Add to Wish List

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
Easy Installation: Designed for straightforward installation with minimal modifications required.
Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.

Show More Show Less

Active Autowerke Differential Support Bracket (DSB) - E36

T#:397248

Part#: 13-004

Ships in 7 Business Days

5% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD

Add to Wish List

Qty

5% off MSRP

$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD

Add to Wish List

The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

Previously used Active Autowerke Part Number AA-DSB-E36

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

Show More Show Less

Rear Subframe Reinforcement Kit

T#:397247

Part#: 13-005

Ships in 3 Business Days

5% off MSRP $ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD

Add to Wish List

Qty

5% off MSRP

$ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD

Add to Wish List

One of the most common issues with the E46 is that the subframe likes to tear away from the chassis. Fix this by welding in a Rear Subframe reinforcement kit.

Includes all necessary reinfored metal plates
Professional installation is required
Suspension must be realigned after installation

Fits the following BMWs:
1998 - 2006 E46 320i 323i 325i 325xi 328i 330i 323ci 325ci 330ci M3

Show More Show Less

Active Autowerke "G-Brace" - G80 G82 G83 G87 M2 M3 M4 S58

T#:25109039

Part#: AAG8XGBRACE

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Active Autowerke designed this piece to allow for more clearance with aftermarket mid-pipes. Factory clearance is tight and not conducive for larger than factory diameter piping. This piece allows for more clearance without sacrificing any structural rigidity and is made from high-strength 6061 aluminum to match the strength of the OEM brace.

Show More Show Less

VTT G8X Carbon Fiber Strut Braces - Anodized Ends

T#:26938445

Part#: VTT-G8X-CAR-STR

Ships in 10 Business Days

Starting at $ 776.99 USD

Add to Wish List

Starting at $ 776.99 USD

Add to Wish List

We took our popular Billet G8X strut bars and redesigned them to use genuine forged carbon fiber centers. No metal with ugly carbon overlay. This is a real carbon fiber strut bar with ends that are CNC machined from 6061-T6 aluminum, and anodized in Black, Red, or Clear.

Show More Show Less

Vargas Carbon Fiber Strut Braces - Black (G2X)

T#:4662411

Part#: VTT-G2X-STRBLK

Ships in 10 Business Days

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Black. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.

Show More Show Less

Vargas Carbon Fiber Strut Braces - Blue (G2X)

T#:4662413

Part#: VTT-G2X-STRBLU

Ships in 4 Business Days

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Blue. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.

Show More Show Less

AST Suspension Adjustable Top Mount Camber Plates - OEM Damper - BMW ...

T#:32980571

Part#: TMA-B20-A2-20F

In Stock at Vendor

$ 1,140.00 USD

Add to Wish List

Qty

$ 1,140.00 USD

Add to Wish List

The latest innovative design from the expert engineers at AST Suspension is a solution for BMW owners seeking additional camber adjustment while retaining the factory struts. AST Suspension’s lowering spring and adjustable lowering spring sets can be combined with the camber-adjustable top mounts, meaning customers who have already equipped their vehicles with those components can now improve camber adjustability without losing the electronic dampers’ OE functionality. These new top mounts provide an additional 0° to -4.2° of camber adjustment, improving on factory adjustments done via the OE arms. AST Suspension opted for solid bushings made from 7075 high-grade aluminum with stainless steel inserts, manufactured in Japan. AST Suspension has employed these bearings in various applications for over 25 years, and they are trusted for their long-lasting anti-wear characteristics that have led to success in endurance racing. As an added benefit, these motorsport-quality bearings are effectively silent, preserving factory NVH. AST Suspension specializes in producing suspension components for vehicles serving regular street use and competition purposes such as race, rally, autocross, and more. The company has continuously evolved since its establishment in 2000 and has always taken pride in its work. By combining in-house design and production with technical know-how, industry experience, and road-and-track testing, AST Suspension consistently produces exceptional suspension components at a competitive price. Features: Adjustment from 0 degrees to -4.2 degrees of camber Retains full functionality of OE dampers Compatible with AST Lowering Springs and Adjustable Lowering Springs

Show More Show Less

Bavarian Autosport Rear Stress Bar - E30 BMW

T#:578812

Part#: 010442

Special Order: No Guaranteed ETA

Sale - Save 3% $ 195.99

This product was last offered at the strikethrough price on
05-03-2026

$ 190.11 USD

Add to Wish List

Qty

Sale - Save 3%

$ 195.99

This product was last offered at the strikethrough price on
05-03-2026

$ 190.11 USD

Add to Wish List

Improve your BMW's handling! Bav's stress bar locks the top of your BMW's strut towers together to improve chassis stiffness and handling. The result is greater stability in hard cornering--a difference you can really feel, giving you greater confidence and control. Made of strong, lightweight aluminum, and it's manufactured in Germany.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

T#:590105

Part#: ASTLS-14-2686

In Stock at Vendor

$ 242.00 USD

Add to Wish List

Qty

$ 242.00 USD

Add to Wish List

AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

Show More Show Less

AST Lowerings Springs - G20 M340i

T#:9545176

Part#: ASTLS-21-031

In Stock at Vendor

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

After doing a series of exterior mods, carbon, wheels, etc., you may be due for a lowering treatment. This kit for your G20 3 Series from AST Suspension, will allow you to sit 30mm lower in the front and 30mm lower in the rear, all at an affordable price!

Show More Show Less

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

T#:7640374

Part#: ASTLS-21-080

In Stock at Vendor

$ 461.99 USD

Add to Wish List

Qty

$ 461.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On

Show More Show Less

E36, E46, Z3 Rear Shock Mount Reinforcement (Sold Each)

T#:578621

Part#: B3300044

In Stock

Sale - Save 3% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

Qty

Sale - Save 3%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

This is a direct replacement for the factory BMW rear shock mount reinforcement, as equipped by BMW on Z3 models. This also fits all E36 and E46 models as well. Turner Motorsport makes our own that are thicker but these can also do a good job of preventing cracks and deformation of the rear shock towers. Priced per reinforcement plate. Order 2 to cover both rear shock towers. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. This item fits the following BMWs: 1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 325i 325is 328i 328is M3 (not for convertible models) 1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not for convertible models) 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Upper Control Arm with Bushing - Right

T#:579752

Part#: 51569

In Stock

Sale - Save 80% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Qty

Sale - Save 80%

$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Control arm with factory bushing for easy installation! If your control arm bushing is bad, it's worth buying this entire unit to save yourself time and money down the road.

Vargas Carbon Fiber Strut Braces - Titanium (G2X)

T#:4662392

Part#: VTT-G2X-STRTI

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from T2 Titanium and anodized in genuine T2 Titanium with a rainbow finish. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.

Show More Show Less

Vargas Turbo CNC Billet Aluminum Strut Brace Kit - G80 M3, G82 M4 ...

Available for pre-order now!

T#:1996177

Part#: VTT-G8X-STRUT

Ships in 10 Business Days

Starting at $ 661.99 USD

Add to Wish List

Starting at $ 661.99 USD

Add to Wish List

BMW's G80 and G82 M cars are arguably two of the best-built BMW chassis to date, but it does have a few shortcomings. One of the first design weaknesses many people notice right away are the ugly, simplistic front strut brace bars. With the level of detail put into the rest of the M3 and M4, these plain steel bars seem like an afterthought. Vargas Turbo Technologies felt there was major room for improvement and set out to design a new brace kit that is aesthetically pleasing while retaining the strength and fitment of the OE bars. The result is a beautiful, functional 3 piece design with an interlinking "V" bar and center support bar. These Strut Braces are CNC machined from 6061-T6 aluminum and are anodized in Black, Red, or Clear.

Show More Show Less

VTT F9X X3/4M Billet Aluminum Short Strut Braces

T#:26938501

Part#: VTT-F9X-STRUT

Ships in 10 Business Days

Starting at $ 230.99 USD

Add to Wish List

Starting at $ 230.99 USD

Add to Wish List

While BMW did a beautiful job on the F9X X3/4M’s they sure decided to get cheap out on the strut bars. Ugly steel bars with no real pop or aesthetically pleasing qualities seem like an afterthought to such a well-thought-out car. Well, here at VTT we decided to do something about it, and immediately took our bars off, and let our engineers go to work on a solution. What they came up with is beautiful, and functional. 100% CNc machined from 6061-T6 aluminum and anodized in a variety of colors The result adds a gorgeous look to your X3/4M engine bay, and what BMW should have done from the factory.

Show More Show Less

AST Suspension Adjustable Lowering Springs - BMW F95/F96 2020+ X5M X6...

T#:49857444

Part#: ASTALS-21-012

In Stock at Vendor

10% off MSRP $ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,332.00 USD

Add to Wish List

Qty

10% off MSRP

$ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,332.00 USD

Add to Wish List

AST Adjustable Lowering Springs (ALS) are a great alternative to traditional lowering springs as they allow for a range of adjustment, not a fixed ride height. This is perfect for someone looking to dial in the exact ride height desired on their BMW.

Show More Show Less

Vargas Front Bushing Insert Kit - BMW G42 2

T#:51672719

Part#: VTT-A9X-G42-FRON

Ships in 10 Business Days

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

The VTT Front Bushing Insert Kit is the definitive solution for owners looking to eliminate the "slop" in their drivetrain.

Vargas Double Adjust Drag Shock Kit - BMW E9X 3

T#:51778132

Part#: VTT-E9/8X-DRAG-S

Ships in 10 Business Days

$ 1,104.99 USD

Add to Wish List

Qty

$ 1,104.99 USD

Add to Wish List

The VTT BMW E9X/E8X Double Adjust Drag Shock Kit is the ultimate suspension upgrade for serious enthusiasts looking to shave seconds off their ET.

Vargas Rear Bushing Insert (Front Side Only) - BMW F9X X3/4M ...

T#:51672721

Part#: VTT-X3M-RIFS

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

The VTT Street Series Rear Bushing Inserts are the perfect "OEM Plus" upgrade for the F97/F98 chassis.

Vargas Double Adjust Drag Shock Kit - Toyota A90/91 Supra

T#:51778131

Part#: VTT-SUPRA-DRAG-S

Ships in 10 Business Days

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

Maximize your Supra’s racing potential with the VTT Double Adjust Drag Shock Kit, a comprehensive solution designed to eliminate the compromises of the stock Mag-Ride system.

Vargas Double Adjust Drag Shock Kit - BMW F3X, G2X, Toyota A90/91 Sup...

T#:51778129

Part#: VTT-F/G-DRAG-SHO

Ships in 10 Business Days

$ 1,104.99 USD

Add to Wish List

Qty

$ 1,104.99 USD

Add to Wish List

Maximize your BMW’s potential at the drag strip with the VTT Double Adjust Drag Shock Kit.

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

T#:56001958

Part#: SPLRUAE9XKT2

Ships in 2 Business Days

$ 1,258.00 USD

Add to Wish List

Qty

$ 1,258.00 USD

Add to Wish List

This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links

Show More Show Less

Active Autowerke Chassis Brace - G2X M340i/M440i

T#:51320825

Part#: 11-129

Ships in 3 Business Days

$ 332.00 USD

Add to Wish List

Qty

$ 332.00 USD

Add to Wish List

Active Autowerke designed this piece to allow for more clearance with aftermarket mid-pipes. Factory clearance is tight and not conducive for larger than factory diameter piping. This piece allows for more clearance without sacrificing any structural rigidity and is made from high-strength 6061 aluminum to match the strength of the OEM brace.

Show More Show Less

Vargas Billet Ride Height Bracket - Toyota GR Supra (A90/A91) ...

T#:51672702

Part#: VTT-A9X-RIDE-BRA

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas Billet Ride Height Bracket is the "peace of mind" upgrade every MKV Supra owner needs.

AST Suspension Adjustable Lowering Springs - BMW M5 G99

T#:41728762

Part#: ASTALS-21-021

In Stock at Vendor

$ 1,332.00 USD

Add to Wish List

Qty

$ 1,332.00 USD

Add to Wish List

AST Adjustable Lowering Springs (ALS) are a great alternative to traditional lowering springs as they allow for a range of adjustment, not a fixed ride height. This is perfect for someone looking to dial in the exact ride height desired on their BMW. A major benefit of AST's ALS kit is direct compatibility with all stock factory suspension systems, such as adaptive/electronic suspension. Suspension ride height adjustments can be made without negatively affecting the electronic adjustment system or your BMW's driving dynamics.

Show More Show Less

Upper Control Arm Ball Joint - E53

T#:579797

Part#: 52322

Special Order: No Guaranteed ETA

Sale - Save 20% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD

Add to Wish List

Mounting bolts sold separately. Two required per ball joint.

Sway Bar Link - Front

T#:579821

Part#: 52501

Special Order: No Guaranteed ETA

Sale - Save 20% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Bavarian Autosport Front Stress bar - E34 525i

T#:578804

Part#: 010412

Special Order: No Guaranteed ETA

Sale - Save 3% $ 297.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.05 USD

Add to Wish List

Qty

Sale - Save 3%

$ 297.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.05 USD

Add to Wish List

Add chassis stiffness and style to your E34.

Rear Suspension Carrier / Differential Mount - Front Left - E46 E83 ...

T#:579685

Part#: 50259

Special Order: No Guaranteed ETA

Sale - Save 20% $ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD

Add to Wish List

Rear subframe bushings are a common failure point, creating a clunking condition and unwarranted subframe shifting under load. Replace your bad bushings with these new units from Bavarian Autosport.

Sway Bar Link - Front Left

T#:579840

Part#: 53338

Special Order: No Guaranteed ETA

Sale - Save 20% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Sway Bar Link - Front Right - E39

T#:579841

Part#: 53339

Special Order: No Guaranteed ETA

Sale - Save 20% $ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 13.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 13.59 USD

Add to Wish List

Common cause of clunking noises and a loss of handling performance.

Bavarian Autosport Front Stress bar - E36 OBDI (1992-1995)

T#:578805

Part#: 010414

Special Order: No Guaranteed ETA

Sale - Save 20% $ 289.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 289.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Add stiffness and style to your E36.

Lowering Springs Set - R57 MINI Convertible S/JCW

T#:31556190

Part#: ASTLS-14-1338

Back Ordered

$ 256.99 USD

Add to Wish List

Qty

$ 256.99 USD

Add to Wish List

Lowering Springs Set - F56 MINI Cooper S/JCW

T#:27005166

Part#: ASTLS-17-070

Back Ordered

$ 213.00 USD

Add to Wish List

Qty

$ 213.00 USD

Add to Wish List

Lowering Springs Set - R58 MINI Coupe S/JCW

T#:31556130

Part#: ASTLS-14-1341

Back Ordered

$ 256.99 USD

Add to Wish List

Qty

$ 256.99 USD

Add to Wish List

Lowering Springs Set - R56 MINI Cooper

T#:31522868

Part#: ASTLS-14-1333

Back Ordered

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

Vargas Carbon Fiber Strut Braces - Red (G2X)

T#:4662414

Part#: VTT-G2X-STRRED

Back Ordered

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Red. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.

Show More Show Less

Lowering Springs Set - F56 MINI Cooper

T#:31556191

Part#: ASTLS-17-069

Back Ordered

$ 212.99 USD

Add to Wish List

Qty

$ 212.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Suspension Parts

Sub-Categories

5100 Series Shock Absorbers for MINI

Benefits:

BMW F8X M2 M3 M4 Chassis Bracing

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results