Enhance your MINI's performance with the 5100 Series shock absorbers, featuring innovative inverted/upside-down technology. These shock absorbers utilize race-proven design to provide exceptional strength and improved suspension geometry, ensuring optimal performance on both road and track environments. With the 5100 Series suspension, enjoy better performance than standard twin-tube designs, thanks to its adjustability and rebound control. The Monotube design separates oil and nitrogen, allowing for a larger piston and increased damper performance. This results in enhanced grip, control, and driver feedback. Additionally, the set includes front top mounts and is rebuildable for long-term use.
These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts. 
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
The strut mount is a critical suspension component that provides a secure mounting point and pivot for your BMW's front strut. With higher mileage, the built-in bearing can wear out, leading to reduced suspension performance, increased noise, and compromised handling.
For optimal suspension function and durability, it’s recommended to replace the strut mounts whenever installing new front struts. Choose this premium replacement from Bremmen Parts for a reliable and long-lasting repair.
M7 Strut Reinforcement Plates 53-510101 are the ultimate solution for MINI owners facing the common issue of strut tower mushrooming caused by heavy impacts from shocks and low aspect ratio tires. Over time, MINI's shock towers can develop a convex shape, disrupting suspension alignment and leading to a noticeable pull to one side. The M7 Strut Reinforcement Plates (SRPs) address this problem by reinforcing the sheet metal and shock top plate, creating a durable surface that resists bending, even during hard impacts.
Designed specifically for the R50 Base Model Cooper, the R52 Convertible, and the R53 Cooper S, these SRPs are an essential upgrade for any MINI enthusiast. Constructed from CNC machined billet aluminum and black anodized for durability, the 1/2" (13mm) thick plates cover the entire surface of the strut tower, distributing loads evenly and providing peace of mind.
Whether you drive your MINI daily or push it to the limits on the track, M7 Strut Reinforcement Plates offer a cost-effective preventative measure against expensive suspension repairs. Easy to install in less than 20 minutes, the SRPs use the stock nuts for mounting and come with instructions that also guide you through fixing existing mushrooming.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Worn or broken sway bar end links can significantly impact your vehicle's handling, preventing the sway bar from functioning properly. Restore your suspension performance with a high-quality OE replacement sway bar end link from Bremmen. Upgrading to new end links reduces body roll, improves cornering, and enhances overall driving dynamics—an excellent way to refresh your suspension system.
Common signs of failing sway bar end links include loose handling in corners, knocking noises, and a sloppy feel when driving over bumps. Fortunately, replacing them is straightforward and can be done by any automotive enthusiast.
If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.
Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.
This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.
The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.
We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.
Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.
Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.
The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).
If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!
Please note:
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Air springs replace traditional coil springs in your vehicle's suspension system, providing the ability to automatically adjust the spring rate and ride height by inflating or deflating the spring assembly as needed. This ensures a smooth ride and optimal handling across various driving conditions.
However, over time, air springs can develop leaks, compromising their ability to maintain the necessary air pressure. When this happens, the suspension may fail to keep the vehicle level or provide a smooth ride.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Worn or broken sway bar end links can significantly impact your vehicle's handling, preventing the sway bar from functioning properly. Restore your suspension performance with a high-quality OE replacement sway bar end link from Bremmen. Upgrading to new end links reduces body roll, improves cornering, and enhances overall driving dynamics—an excellent way to refresh your suspension system.
Common signs of failing sway bar end links include loose handling in corners, knocking noises, and a sloppy feel when driving over bumps. Fortunately, replacing them is straightforward and can be done by any automotive enthusiast.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-07-2026
Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
There's finally an option to buy housings separate from the bushings, this way you don't have to live with the stress placed on the stock housings when pressing the old bushing out. The biggest benefit come in when there isn't already a pre-pressed in option for poly and spherical upgrades, this leaves the only option of pressing the old bushings out. Through out in-house testing when designing our poly and spherical upgrades we noticed that pressing the bushing out caused stress in some cases creating hairline cracks in the housing leaving it vulnerable to failure.
This item fits the following BMWs:
2001-2006 E46 BMW M3
MINI R56 Front Left Loaded Front Strut provides a convenient and efficient solution for replacing your vehicle’s front strut, spring, and strut mount. This pre-assembled unit eliminates the need for special disassembling tools, as it comes fully assembled, allowing for a quicker and easier installation with standard hand tools.
