Enhance your MINI's performance with the 5100 Series shock absorbers, featuring innovative inverted/upside-down technology. These shock absorbers utilize race-proven design to provide exceptional strength and improved suspension geometry, ensuring optimal performance on both road and track environments. With the 5100 Series suspension, enjoy better performance than standard twin-tube designs, thanks to its adjustability and rebound control. The Monotube design separates oil and nitrogen, allowing for a larger piston and increased damper performance. This results in enhanced grip, control, and driver feedback. Additionally, the set includes front top mounts and is rebuildable for long-term use.
These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts. 
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
02-23-2026
The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.
This product was last offered at the strikethrough price on
05-29-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.
Previously used Active Autowerke Part Number AA-DSB-E36
This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3
M7 Strut Reinforcement Plates 53-510101 are the ultimate solution for MINI owners facing the common issue of strut tower mushrooming caused by heavy impacts from shocks and low aspect ratio tires. Over time, MINI's shock towers can develop a convex shape, disrupting suspension alignment and leading to a noticeable pull to one side. The M7 Strut Reinforcement Plates (SRPs) address this problem by reinforcing the sheet metal and shock top plate, creating a durable surface that resists bending, even during hard impacts.
Designed specifically for the R50 Base Model Cooper, the R52 Convertible, and the R53 Cooper S, these SRPs are an essential upgrade for any MINI enthusiast. Constructed from CNC machined billet aluminum and black anodized for durability, the 1/2" (13mm) thick plates cover the entire surface of the strut tower, distributing loads evenly and providing peace of mind.
Whether you drive your MINI daily or push it to the limits on the track, M7 Strut Reinforcement Plates offer a cost-effective preventative measure against expensive suspension repairs. Easy to install in less than 20 minutes, the SRPs use the stock nuts for mounting and come with instructions that also guide you through fixing existing mushrooming.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
One of the most common issues with the E46 is that the subframe likes to tear away from the chassis. Fix this by welding in a Rear Subframe reinforcement kit.
Fits the following BMWs:
1998 - 2006 E46 320i 323i 325i 325xi 328i 330i 323ci 325ci 330ci M3
If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.
Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.
This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.
The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.
We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.
Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.
Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.
The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).
If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!
Please note:
Swapping in E46 control arms into your E30 or E36 significantly increases negative camber by widening the track width and also gives you more clearance for more steering angle. Condor's CNC machined control arm brackets are made from solid steel and are fitted with a solid hex-shaped bushing. Designed for the street or the track, they hold the control arm steady and eliminate "shimmy" caused by stock bushings. They sharpen steering and improve overall driving feel. Comparable to the NLA Treehouse E36 & E30 Eyeball Arms.
Easiest install of any aftermarket solution
Allow clearance for E30 M50 Conversion exhaust
Street Approved, marginal increase in NVH
Easy Installation, no need for a press
CNC machined steel construction
Solid design without the maintenance of spherical bearings
Heavy-Duty replaceable UHMW insert. Don't be misinformed, UHMW is the best material for these inserts. Delrin is not self-lubricating and will crack and degrade over time.
Powder coated white for corrosion resistance
Improve caster with M3 offset geometry
Keep proper steering geometry under high loads
Made in the U.S.A.
Fitment:
E30 84-91 3 Series
E36 92-98 3 series & Z3
Note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36
Be sure to measure your control arms to determine if you need 21mm or 23mm. Meyle makes a standard e46 control arm and a Heavy Duty control arm. Most HD arms have a hex that is larger in size (23mm). Lifetime Warranty
Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.
Swapping in E46 control arms into your E30 or E36 will significantly increase negative camber by widening the track width and will also give you more clearance for more steering angle. Condor's conversion bushings are machined from UHMW due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change). They've designed them offset to re-center the wheel and give your e30/e36 the correct caster. They will include a stainless-steel insert that tightly presses over the hex pattern on the E46 control arms. You do not need to grind down your control arms or make any other modifications to your chassis. Please note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36.
Fitment:
Fits the following Meyle and Lemforder arms with 21-22MM Hex.
LEMFORDER ZHP - 31122282121 & 31122282122
LEMFORDER - 31126777851 & 31126777852
MEYLE HD - 31126777851 & 31126777852
*Please note that Meyle makes a standard e46 control arm and a Heavy Duty control arm. SOME HD arms have a hex that is larger in size. These HD control arms may need to be shaved 1-2 mm for proper fitment.
M7 Speed introduces a unique suspension product for the popular Generation 1 MINI Cooper models R50 through R53. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and this product is great for Rally Cross.
Engineered to convert the mild-mannered MINI into a more capable and versatile daily driver, this kit is perfect for spirited adventure motoring, weekend overlanding, living off the grid, or navigating pothole-riddled urban streets. The M7 Speed 2" Lift Kit lifts the MINI 2" higher, plus an additional lift from larger diameter tires (up to an extra 1.5"). No additional modifications are required—just bolt it in, realign, and enjoy! Enhance your MINI with aftermarket wheels and larger tires for a more durable, practical, and enjoyable vehicle.
M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Known for exceptional customer service and product innovation, the company is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. M7 Speed is located in Mooresville, North Carolina, also known as Race City USA.
M7 Speed proudly introduces a unique suspension product for the popular Generation 2 MINI Cooper models R55 through R59. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and they are great for Rally Cross.
Engineered to transform the mild-mannered MINI into a more capable and versatile daily driver, this product is perfect for today’s lifestyle. Whether it's for spirited adventure motoring, weekend overlanding, living off the grid, or tackling pothole-riddled urban streets, the M7 Speed 2" Lift Kit makes it possible. By installing this lift kit, the MINI is elevated by 2 inches, plus an additional lift from larger diameter tires (up to an extra 1.5 inches). No additional modifications are required—simply bolt it in, perform a realignment, and enjoy! Add aftermarket wheels and larger tires to create a unique, durable, and practical vehicle that everyone will love.
The M7 Speed Stage 1 Kit includes everything needed for the transformation. This kit features precision-fabricated lift blocks and a set of MAXX-G heavy-duty adjustable front sway bar links. These shorter links are necessary to prevent suspension bind that can occur with stock-length sway bar links.
M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Renowned for exceptional customer service and product innovation, M7 Speed is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, also known as Race City USA, M7 Speed is at the epicenter of North American motorsports.
Upgrade your MINI Countryman or Paceman with the Stage 1 Bundle from M7 Speed, combining industry-leading suspension components for ultimate performance. This bundle includes M7's solid billet aluminum lift kit and MAXX-G adjustable sway bar links, designed specifically for the R60 Countryman and R61 Paceman models. Enjoy enhanced road clearance, improved cornering performance, and easy installation with this comprehensive bundle.
Enhance the handling and durability of your MINI with the M7 Speed MAXX-G High Performance Billet Aluminum Adjustable Rear Sway Bar Link Kit. This set of 2 direct replacement parts is compatible with all Gen 3 MINI Coopers and BMW X1 & X2 models. Crafted from CNC machined billet aircraft-grade aluminum, these sway bar links feature durable 90A durometer urethane bushings and forged steel adjustable tie rod ends. The design ensures over 10 times the strength and rigidity of the stock plastic parts, resulting in reduced compliance in the suspension system, improved sway bar response, and increased wheel rate for enhanced grip and control. With sealed and permanently lubricated tie rod ends and corrosion-resistant finishes, this kit guarantees longevity and performance. Upgrade your MINI's handling with the MAXX-G link kit, backed by a lifetime guarantee.
This product was last offered at the strikethrough price on
08-10-2026
This product was last offered at the strikethrough price on
08-10-2026
Enhance your MINI's handling by stiffening its chassis with the newly redesigned M7 Rear Chassis Brace. This upgrade is crucial for maximizing tire grip, allowing your suspension components—such as springs, shocks, and sway bars—to function optimally and keep your tires in better contact with the ground, resulting in improved grip.
Upgrade your MINI's chassis with the M7 Rear Chassis Brace and experience a significant improvement in grip and handling.
