5100 Series AST Coilovers - MINI F55 F56 F57

T#:26171671

Part#: ACU-B1402S

Back Ordered

$ 3,213.00 USD

Add to Wish List

Qty

$ 3,213.00 USD

Add to Wish List

5100 Series Shock Absorbers for MINI

Enhance your MINI's performance with the 5100 Series shock absorbers, featuring innovative inverted/upside-down technology. These shock absorbers utilize race-proven design to provide exceptional strength and improved suspension geometry, ensuring optimal performance on both road and track environments. With the 5100 Series suspension, enjoy better performance than standard twin-tube designs, thanks to its adjustability and rebound control. The Monotube design separates oil and nitrogen, allowing for a larger piston and increased damper performance. This results in enhanced grip, control, and driver feedback. Additionally, the set includes front top mounts and is rebuildable for long-term use.

Benefits:

Enhanced performance compared to standard twin-tube designs
Innovative inverted technology for better suspension geometry
Adjustable rebound for personalized driving experience
Monotube design increases damper performance and sensitivity
Rebuildable set for long-term durability

Show More Show Less

5100 Series AST Coilovers

T#:27205370

Part#: ACU-B1301S

Back Ordered

$ 2,586.99 USD

Add to Wish List

Qty

$ 2,586.99 USD

Add to Wish List

AST 5200 Series Coilovers - E9X M3

T#:24643799

Part#: RIV-B1603SD

Back Ordered

$ 6,010.00 USD

Add to Wish List

Qty

$ 6,010.00 USD

Add to Wish List

AST 5300 Series Coilovers - 2021+ BMW M3 G80 / M4 G82

T#:29898448

Part#: RAC-B2112SD

Back Ordered

$ 8,127.00 USD

Add to Wish List

Qty

$ 8,127.00 USD

Add to Wish List

Are you the most dedicated enthusiast on the race track? Elevate your racing game to a championship level with the AST 3-WAY MOTORSPORT SUSPENSION. This advanced system empowers you to challenge your vehicle by independently adjusting rebound and low- and high-speed compression with a remote reservoir, providing distinct feedback and a unique driving sensation with each setting. ### Key Features: **Inverted Strut Design:** Built to withstand heavy side loads and braking forces, ensuring peak performance under intense conditions. **MONOTUBE Coilover Design:** Both front and rear dampers utilize this design, offering consistent performance and superior heat dissipation. **Adjustable Spring Rates:** Allows you to fine-tune your vehicle's suspension to meet your specific needs. **Rebound Adjustment:** With 12 distinct positions, you can control the damper's return to extension, affecting how the vehicle responds after compression and providing a unique driving experience with each setting. **Compression Adjustment:** Customize the suspension's response to compression with separate low- and high-speed controls: - **Low-Speed Compression:** Manages the suspension’s reaction to gentle, gradual forces. - **High-Speed Compression:** Handles rapid, forceful impacts. ### Benefits: - **Improved Handling:** Adjusting rebound and compression settings helps reduce body roll during cornering, enhancing responsiveness and maintaining tire contact for better traction. - **Customized Ride Comfort:** Fine-tune compression adjustments to balance performance and comfort, tailoring the ride quality to your preferences. - **Enhanced Front-End Grip:** Camber-adjustable front top mounts provide more wheel adjustment, transforming front-end grip and offering better control over your vehicle’s geometry. ### Additional Features: - **Solid Rear Top Mounts:** Ensure durability and stability under demanding conditions. With the AST 3-WAY MOTORSPORT SUSPENSION, you can fine-tune and customize three critical aspects of your vehicle's suspension, transforming your driving experience and elevating your performance. Designed for the most dedicated racing enthusiasts, this suspension system excels on both the road and the track.

Show More Show Less

AST 5300 Series Coilovers - E9X M3

T#:24643800

Part#: RAC-B1603SD

Back Ordered

$ 7,209.00 USD

Add to Wish List

Qty

$ 7,209.00 USD

Add to Wish List

Front Drop Links - Set 258mm to 276mm

T#:31522875

Part#: DLA-MINF-S

Back Ordered

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

AST 2016-2021 BMW M2 F87 / Competition LCI 5200 Series Coilovers ...

T#:38621397

Part#: RIV-B2104SD

Back Ordered

$ 6,714.00 USD

Add to Wish List

Qty

$ 6,714.00 USD

Add to Wish List

BMW F8X M2 M3 M4 Chassis Bracing

T#:4070463

Part#: F-BRACE

Ships in 1 Business Day

$ 99.00

This product was last offered at the strikethrough price on
02-23-2026

$ 94.00 USD

Add to Wish List

Qty

$ 94.00 USD

Add to Wish List

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
Easy Installation: Designed for straightforward installation with minimal modifications required.
Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.

Show More Show Less

AST Suspension Adjustable Lowering Springs - BMW G80 M3, G82 M4, G87 ...

T#:26738336

Part#: ASTALS-21-004

In Stock

5% off MSRP $ 1,235.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,173.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,235.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,173.99 USD

Add to Wish List

AST Adjustable Lowering Springs (ALS) are a great alternative to traditional lowering springs as they allow for a range of adjustment, not a fixed ride height. This is perfect for someone looking to dial in the exact ride height desired on their BMW. A major benefit of AST's ALS kit is direct compatibility with all stock factory suspension systems, such as adaptive/electronic suspension. Suspension ride height adjustments can be made without negatively affecting the electronic adjustment system or your BMW's driving dynamics. Product Details: Fits G87 M2 / G80 M3 / G82 M4/CSL and Competition Models with xDrive or RWD Optimized spring rates Front and Rear for improved dynamics Compatible with Adaptive M factory dampers w/ OEM EDC Lowers vehicle by 20-46mm front and 10-36mm rear Developed to be one of the lowest ride height ranges available for G series BMWs

Show More Show Less

Active Autowerke Differential Support Bracket (DSB) - E36

T#:397248

Part#: 13-004

Ships in 7 Business Days

5% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD

Add to Wish List

Qty

5% off MSRP

$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD

Add to Wish List

The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

Previously used Active Autowerke Part Number AA-DSB-E36

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Rear Subframe Reinforcement Kit

T#:397247

Part#: 13-005

Ships in 3 Business Days

5% off MSRP $ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD

Add to Wish List

Qty

5% off MSRP

$ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD

Add to Wish List

One of the most common issues with the E46 is that the subframe likes to tear away from the chassis. Fix this by welding in a Rear Subframe reinforcement kit.

Includes all necessary reinfored metal plates
Professional installation is required
Suspension must be realigned after installation

Fits the following BMWs:
1998 - 2006 E46 320i 323i 325i 325xi 328i 330i 323ci 325ci 330ci M3

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

ALTA Adjustable Front Endlinks - MINI R55 R56 R57 R58 R59

T#:26404877

Part#: AMPSUS400

In Stock at Vendor

$ 168.99 USD

Add to Wish List

Qty

$ 168.99 USD

Add to Wish List

Upgrade your Mini's suspension with ALTA Adjustable Front Endlinks for the R55, R56, R57, R58, and R59 models. These endlinks allow for precise adjustment, optimizing your vehicle's handling and performance. Crafted with durability in mind, they offer enhanced stability and control, especially during aggressive driving. Installation is straightforward, making it easy to achieve the perfect setup for your Mini.

Enhances suspension performance
Allows for precise adjustment
Improves handling and stability
Durable construction for long-lasting reliability
Easy installation process

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - G20 M340i 330i...

T#:637424

Part#: BMSG20BSCB-BLK

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

MINI R53 R56 ALTA Rear Swaybar - 22mm

T#:23284094

Part#: AMPSUS310

Back Ordered

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

Elevate your BMW's handling prowess with ALTA Sway Bars, meticulously crafted from solid steel using state-of-the-art precision bending equipment. These sway bars come with a durable powder-coated finish, offering robust corrosion resistance and a striking deep red appearance. With laser-cut and MIG welded bar ends, ALTA ensures superior precision and strength, setting them apart from competitors. The multiple endlink mounting holes allow customization of stiffness, providing up to a 400% increase over stock by adjusting the endlink position. ALTA Sway Bars feature centering rings to prevent sway bar movement during aggressive cornering, ensuring consistent performance. The inclusion of polyurethane bushings ensures a responsive feel and enhanced turn-in, with specially designed pockets to retain grease for extended maintenance intervals.

Show More Show Less

Rear Sway Bar End Links - G20 / G29 / A90 / A91

T#:22525948

Part#: WAS-427

In Stock

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Verkline is dedicated to delivering top-tier quality to enhance your driving experience. Their rear sway bar end links are the result of meticulous engineering, starting with a comprehensive 3D laser scan of your vehicle and CAD development of the wishbone. What sets their product apart is the extensive testing it undergoes, including Finite Element Analysis (FEA) and real-world road trials, ensuring you get a premium, high-performance solution. Key Advantages: User-Friendly Adjustability: Achieve precise corner weights without sway bar preload, maintaining consistent suspension heights for improved handling. Enhanced Strength and Rigidity: Enjoy a substantial increase in strength, which translates to superior handling performance. Replaceable High-Quality Uniballs: Say goodbye to the inconvenience of replacing the entire link due to ball joint wear. Our easily obtainable, high-quality uniballs make maintenance hassle-free. Outstanding Features: Bolt-In Installation: No need for vehicle modifications; our kit is designed for straightforward installation. Pre-Assembled Links: Ready to install out of the box, saving you time and effort. Robust High-Strength Pins: Precision-machined from high-strength steel for long-lasting durability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, ensuring top-notch quality and resilience. High-Quality Spherical Bearings and Uniballs: Offering exceptional articulation to prevent bending in any suspension setup. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of your end links. Comprehensive Mounting Kit: Everything you need for a seamless installation is included. OEM Sway Bar and Upright Compatibility: Seamlessly integrates with your existing setup. What's Included: A pair of CNC billet 6082 aluminum front sway bar links turnbuckles (two pieces) Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33506785607 / 33506785608 48830-WAA01

Show More Show Less

Rear Upper Adjustable Lateral Straight Links

T#:22525950

Part#: WAS-422

In Stock

Sale - Save 21% $ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Qty

Sale - Save 21%

$ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Verkline is excited to introduce their Rear Upper Adjustable Lateral Straight Links, the culmination of an extensive development and testing process. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, FEA (Finite Element Analysis) testing, and rigorous road trials. Now, enthusiasts have the opportunity to elevate their driving experience with these high-performance parts. Notable Advantages: Bump Steer and Anti-Squat Adjustability: Users can fine-tune their vehicle's bump steer and anti-squat characteristics for enhanced handling precision. Extended Camber Adjustment Range: These links provide a broader camber adjustment range, offering greater flexibility for alignment customization. Enhanced Strength and Rigidity: Verkline's design boasts increased strength and rigidity, resulting in an overall improvement in handling performance. Consistent Geometry: With no rubber components to flex, these links maintain consistent geometry during alignment adjustments, ensuring accuracy. Efficient Weight Design: Despite the additional functionality, these links maintain a weight profile similar to OEM components. Key Features: Bolt-In Kit: Installation is seamless, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying installation. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure durability and lightweight performance. Premium Motorsport Uniballs: These components feature high-quality motorsport uniballs for reliable and high-performance articulation. Uniball Rubber Boots: Protect against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything needed for installation is included, making setup efficient and straightforward. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. Included Components: Four T45 lightweight steel arms (two pairs) Thin locking nuts High-quality motorsport uniballs Spacer sleeves for assembling the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces the following part numbers: 33326878631 / 33326878632

Show More Show Less

ALTA MINI Rear Control Arms - Pair

T#:754312

Part#: AMPSUS100

In Stock at Vendor

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

ALTA Rear Control Arms are the ultimate upgrade for your MINI, replacing your rear lateral links with a solid and performance-focused design. These control arms enhance traction and handling while giving you precise control over camber and toe settings. The flexibility of ALTA control arms allows for fine-tuning without the hassle of removing and reinstalling the linkage. Simply adjust the lock nuts and twist the center section to achieve your desired settings.

These control arms are the perfect complement to other suspension products like springs, coilovers, or sway bars.

Key Features of ALTA Rear Control Arms:

CNC machined from 6061 aluminum rod for durability.
Heavy texture powder coating for corrosion resistance and added style.
Teflon-lined spherical rod ends for a solid connection and improved articulation.
Aircraft-quality spherical bearings for smooth and precise movement.
Injected Nylon around the ball center for quiet operation as the part ages.

For a comprehensive rear end upgrade, consider purchasing two sets of control arms to replace both upper and lower control arms. This minimizes deflection from the OEM rubber bushings and reduces weight. Please note that on models with Xenon-style headlamps, some modifications to the leveling sensor mounting may be necessary. For additional details, consult your ALTA dealer or our Tech Department.

ALTA Rear Control Arms come with high-quality hardware, including corrosion-resistant spacers and Grade 8 adjustment nuts.

Show More Show Less

Active Autowerke "G-Brace" - G80 G82 G83 G87 M2 M3 M4 S58

T#:25109039

Part#: AAG8XGBRACE

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Active Autowerke designed this piece to allow for more clearance with aftermarket mid-pipes. Factory clearance is tight and not conducive for larger than factory diameter piping. This piece allows for more clearance without sacrificing any structural rigidity and is made from high-strength 6061 aluminum to match the strength of the OEM brace.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - G20 M340i 330...

T#:637423

Part#: BMSG20BSCB-SIL

Ships on Aug 31, 2026

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Rear Adjustable Toe Links With Lockout Kit - G20 / G29 / A90 / A91 ...

T#:22492998

Part#: WAS-424

Ships in 2 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Verkline proudly offers a top-notch solution for BMW G20, G29, and Supra A90/A91 enthusiasts – our high-performance rear spring wishbone bushings. These precision-engineered components have undergone meticulous development, including 3D laser scanning, CAD design, FEA testing, and demanding road trials, ensuring uncompromising quality. With this kit, you can effortlessly upgrade the second bearing (number 13 on the picture) from rubber to uniball, perfectly complementing the factory uniball (mount number 18 on the picture). Enjoy a wide array of benefits, including: Augmented strength and rigidity for unmatched handling performance Maintain precise geometry during alignments by eliminating rubber deformation Key Features: A user-friendly bolt-in kit, requiring no vehicle modifications Pre-assembled inserts for a hassle-free installation Includes a specialized tool for easy insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with top-quality motorsport spherical bearings A comprehensive kit with all necessary components for straightforward mounting Compatible with OEM wishbone and upright components What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for upright and arm assembly A tool for easy insert replacement Printed installation instructions Fits these BMW models: BMW G20 BMW G29 Toyota Supra A90 / A91

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Aug 31, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Rear Spring Wishbone Bushings With Lockout Kit - G20 / G29 / A90 / A9...

T#:22492999

Part#: WAS-425

Special Order: No Guaranteed ETA

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock the full potential of your BMW G20, G29, and Supra A90/A91 with Verkline's rear spring wishbone bushings. This product is the culmination of extensive development and testing, featuring 3D laser scanning, CAD design, FEA analysis, and rigorous road trials. Experience a range of benefits, including: Enhanced strength and rigidity for superior handling performance Eliminate rubber deformations, preserving precise alignment during maintenance Key Features: A user-friendly bolt-in kit that requires no vehicle modifications Pre-assembled inserts for straightforward installation Included tool to prevent wishbone bending during insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with high-quality motorsport spherical bearings Comprehensive kit with all necessary components for seamless mounting Compatible with OEM wishbone and subframe components Please note that if you use lockout plates to block wishbone movement on the subframe, it's essential to correct the camber setting within the adjustable upper bent link. What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for arm assembly with the subframe A tool to prevent wishbone bending during insert replacement Printed installation instructions Fits these BMW models: BMW G20 330i, M340i BMW G29 Z4 M40i, 30i Toyota Supra A90 / A91

Show More Show Less

Rear Upper Adjustable Lateral Bent Links - G20 / G29 / A90 / A91 ...

T#:22525951

Part#: WAS-423

Ships in 10 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Verkline proudly introduces their Rear Upper Adjustable Lateral Bent Links, the result of a comprehensive development and testing program. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with these high-performance parts. Key Advantages: User-Friendly Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings, enabling precise alignment adjustments for improved handling. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these links maintain unaltered geometry during alignment adjustments, ensuring precision. Efficient Weight Design: Despite the added functionality, these links maintain a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications, ensuring a hassle-free setup. Pre-Assembled Wishbone: The wishbone comes pre-assembled with a predefined length, simplifying the installation process. CNC Machined Arm: Expertly crafted from 6082 T6 aluminum, these arms offer superior strength and durability. High-Quality Motorsport Uniballs and Spherical Bearings: These components feature top-tier uniballs and spherical bearings, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum wishbones (camber arms) Two pairs of CNC machined high-strength steel adjustment turnbuckles Thin locking nuts High-quality motorsport uniballs and spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33326881199

Show More Show Less

T#:578812

Part#: 010442

Special Order: No Guaranteed ETA

Sale - Save 3% $ 195.99

This product was last offered at the strikethrough price on
05-03-2026

$ 190.11 USD

Add to Wish List

Qty

Sale - Save 3%

$ 195.99

This product was last offered at the strikethrough price on
05-03-2026

$ 190.11 USD

Add to Wish List

Improve your BMW's handling! Bav's stress bar locks the top of your BMW's strut towers together to improve chassis stiffness and handling. The result is greater stability in hard cornering--a difference you can really feel, giving you greater confidence and control. Made of strong, lightweight aluminum, and it's manufactured in Germany.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Ultimate Full Suspension Set Bundle - A90 / A91 / G29 Z4

T#:22525972

Part#: WAS-400

Back Ordered

$ 7,922.99 USD

Add to Wish List

Qty

$ 7,922.99 USD

Add to Wish List

Verkline's journey to develop an exceptional suspension set for the Supra A9X and BMW Z4 G29 began from day one, and it was significantly influenced by Robert from Apex Nürburgring YouTube video. With a profound understanding of high-speed driving dynamics, Verkline collaborated with Apex to craft a suspension set that pushes the boundaries of performance. Key Components in the Full Set: Rear Lightweight Tubular Subframe (WAS-401) Front Caster Adjustable Control Arms (WAS-410) Front Lower Adjustable Control Arms (WAS-411) Front Bump Steer Adjustable Tie Rod Ends (WAS-412) Front Sway Bar End Links (WAS-413) Rear Adjustable Traction Links (WAS-421) Rear Upper Adjustable Lateral Straight Links (WAS-422) Rear Upper Adjustable Lateral Bent Links (WAS-423) Rear Adjustable Toe Links with a lockout kit (WAS-424) Rear Spring Wishbone Bushings with lockout kit (WAS-425) Rear Knuckle Bushings (WAS-426) Rear Sway Bar End Links (WAS-427) Comprehensive installation and suspension setup instructions (66 printed pages) Toyota Supra A9X and BMW Z4 G29 were designed for an exhilarating driving experience on the streets, but their factory settings may not suffice for those seeking high-performance capabilities. The issue lies in rear-end bump steer, which affects the toe angle during suspension travel. The Consequences of Bump Steer: Rear toe changes unpredictably, impacting stability and handling. During hard acceleration, the rear end tilts, resulting in toe-in. Under hard braking, the rear suspension rises, leading to toe-out. Verkline's Solution: To address these issues and enhance performance, Verkline offers three suspension setup presets (Track, Street, Drag) tailored to various driving styles. These presets provide precise alignment, ride height suggestions, and arm lengths, ensuring optimal kinematics for every designated use of the car. Say goodbye to unpredictable handling issues and experience stable and controlled driving with Verkline's Suspension Set for Toyota Supra A9X and BMW Z4 G29. Transform your car's performance with the expertise of Verkline and Apex Nürburgring. Fits these models: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29

Show More Show Less

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

T#:590105

Part#: ASTLS-14-2686

In Stock at Vendor

$ 242.00 USD

Add to Wish List

Qty

$ 242.00 USD

Add to Wish List

AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

Show More Show Less

AST Lowerings Springs - G20 M340i

T#:9545176

Part#: ASTLS-21-031

In Stock at Vendor

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

After doing a series of exterior mods, carbon, wheels, etc., you may be due for a lowering treatment. This kit for your G20 3 Series from AST Suspension, will allow you to sit 30mm lower in the front and 30mm lower in the rear, all at an affordable price!

Show More Show Less

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

T#:7640374

Part#: ASTLS-21-080

In Stock at Vendor

$ 461.99 USD

Add to Wish List

Qty

$ 461.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On

Show More Show Less

Rear Adjustable Traction Links - G20 / G29 / A90 / A91

T#:22525949

Part#: WAS-421

Back Ordered

$ 579.00 USD

Add to Wish List

Qty

$ 579.00 USD

Add to Wish List

Following an extensive development and testing process, Verkline is pleased to offer their rear adjustable toe links to all automotive enthusiasts. The brand's unwavering commitment to quality and performance is evident in every aspect of these meticulously engineered components. Key Benefits: User-Friendly Toe Adjustability: Enthusiasts can effortlessly achieve precise toe settings, ensuring optimal alignment for enhanced handling. Lockout Plates: Included to prevent wishbone movement on the subframe, preserving desired alignment settings. Enhanced Strength and Rigidity: Verkline's design provides a significant boost in strength and rigidity, resulting in improved handling performance. Consistent Geometry: Verkline guarantees that alignment settings remain unaffected during adjustments, eliminating the effects of rubber-induced deviations. Outstanding Features: Bolt-In Kit: No modifications are required, simplifying the installation process for users' convenience. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, saving both time and effort. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure both durability and lightweight performance. Premium Motorsport Uniballs: Verkline's components feature reliable and high-performance articulation. Uniball Rubber Boots: These boots offer protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Verkline includes all the necessary components for installation, streamlining the setup process. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. What's Included: Two pairs of T45 lightweight steel arms (four arms in total) Two pairs of clevises (four clevises in total) Thin locking nuts High-quality motorsport uniballs Lightweight aluminum spacer sleeves for easy arm assembly in the rear subframe Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can experience the precision and performance of Verkline's Rear Adjustable Toe Links, allowing them to elevate their vehicle's handling and alignment for a smoother and more controlled driving experience. Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91

Show More Show Less

Front Mount Camber Plates 3 Bolt Top - F82 M4

3-Bolt Fitment only, Will Not Fit Factory Struts

T#:554063

Part#: TMA-B15-A2-20F

Back Ordered

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The plates are made out of an exotic high grade aluminum and the bearing plus its carrier are made within very small tolerances that results in a unique noise free pillowball setup. AST uses the same materials and bearings as they use in the aviation industry. That is the reason the the top mounts are almost free of maintenance. AST guarantees a good quality product.

Show More Show Less

Front Sway Bar End Links - Toyota Supra A90 / A91

T#:22525958

Part#: WAS-413

Back Ordered

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Verkline is delighted to introduce their Front Sway Bar End Links, a product that has undergone a meticulous development process, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. This journey of innovation has led to the creation of high-performance sway bar end links, now available for automotive enthusiasts. Key Advantages: User-Friendly Length Adjustability: These end links offer effortless length adjustment, allowing users to achieve ideal corner weights without sway bar preload and ensuring consistent suspension heights. Enhanced Strength and Rigidity: Verkline's design prioritizes increased strength and rigidity, resulting in improved handling performance and better control. Replaceable High-Quality Uniballs: In the event of ball joint wear, these end links are designed to allow the replacement of easily accessible, high-quality uniballs, eliminating the need to change the entire component. Noteworthy Features: Bolt-In Kit: The installation process is straightforward and requires no modifications, ensuring a hassle-free setup. Pre-Assembled Links: The end links are conveniently pre-assembled, simplifying the installation procedure. Robust Pins: Precision-machined from high-strength steel, the pins ensure durability and longevity. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, the turnbuckles offer excellent strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, guaranteeing reliable and high-performance articulation. Uniball Rubber Boots: Designed to protect against dust and water, these rubber boots extend the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coilover Compatibility: The design seamlessly integrates with existing setups, including OEM sway bars and coilovers. Included Components: Two pairs of CNC billet 6082 aluminum front sway bar links turnbuckles Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions With Verkline's Front Sway Bar End Links, automotive enthusiasts can now experience enhanced precision and performance, allowing them to improve their vehicle's handling and suspension for a more controlled and responsive driving experience. These components are thoughtfully designed to seamlessly integrate with OEM sway bars and coilovers, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

Front Lower Adjustable Control Arms - Toyota Supra A90 / A91 ...

T#:22525955

Part#: WAS-411

In Stock

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

Verkline proudly presents their Front Adjustable Camber Arm, a product that has undergone a thorough development and testing program. These state-of-the-art components have followed a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with this high-performance camber arm. Key Advantages: Effortless Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings using a turnbuckle jackscrew, enabling precise alignment adjustments. Roll Center Adjustability: These camber arms offer roll center adjustability with spacers, providing greater control over the vehicle's handling dynamics. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these camber arms maintain unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings and Uniballs: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings and uniballs for convenience. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Robust, Adjustable Xenon Sensor Mounting: Designed for versatility and durability, offering compatibility with xenon sensors. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle, Subframe, and Xenon Sensor Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (camber arms) Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts High-quality motorsport spherical bearings and uniballs Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Set of pin spacers for roll center adjustment Adjustable xenon sensor mounting Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Camber Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. To optimize roll center, it's recommended to add spacers on the front toe link, which can be achieved using Verkline's bump steer adjustable tie rod ends. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

E36, E46, Z3 Rear Shock Mount Reinforcement (Sold Each)

T#:578621

Part#: B3300044

In Stock

Sale - Save 3% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

Qty

Sale - Save 3%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

This is a direct replacement for the factory BMW rear shock mount reinforcement, as equipped by BMW on Z3 models. This also fits all E36 and E46 models as well. Turner Motorsport makes our own that are thicker but these can also do a good job of preventing cracks and deformation of the rear shock towers. Priced per reinforcement plate. Order 2 to cover both rear shock towers. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. This item fits the following BMWs: 1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 325i 325is 328i 328is M3 (not for convertible models) 1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not for convertible models) 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Upper Control Arm with Bushing - Right

T#:579752

Part#: 51569

In Stock

Sale - Save 80% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Qty

Sale - Save 80%

$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Control arm with factory bushing for easy installation! If your control arm bushing is bad, it's worth buying this entire unit to save yourself time and money down the road.

MINI R Chassis Positive Steering Response System (PSRS) w/Urethane Bu...

T#:29002071

Part#: AMPSUS112

In Stock at Vendor

$ 216.99 USD

Add to Wish List

Qty

$ 216.99 USD

Add to Wish List

MINI R Chassis Positive Steering Response System (PSRS) w/Urethane Bushing

Engineered for Mini Cooper R Chassis owners seeking improved handling, this system offers a host of benefits:

Enhanced steering response for precise control
Reduced body roll for better cornering performance
Urethane bushings for improved durability and reliability
Easy installation with included hardware

Show More Show Less

T#:22525970

Part#: WAS-401

Ships in 10 Business Days

$ 3,069.00 USD

Add to Wish List

Qty

$ 3,069.00 USD

Add to Wish List

Following extensive development and testing, Verkline is thrilled to introduce this cutting-edge rear subframe to the global automotive community. Crafted with precision and performance in mind, this subframe is the result of a comprehensive process that includes 3D laser scanning, CAD development, Finite Element Analysis (FEA) testing, and rigorous road trials. Key Benefits: Significant Weight Reduction: This lightweight subframe is 6.5 kg lighter than the OEM rear subframe, resulting in a remarkable 33% reduction in weight on the rear axle, delivering enhanced vehicle performance. Optimized Rear Final Drive Position: The rear final drive has been strategically repositioned 10 mm upward to alleviate stress on the C.V. joints. This adjustment safeguards against premature joint wear, especially when lowering the vehicle. Robust Mounting: The subframe has eliminated rubber mounts in favor of a single, bolted mounting position. This design choice prevents rear subframe shifts during high-load situations. Bump Steer Adjustment: The subframe is equipped with additional bump steer adjustment capabilities, enabling users to fine-tune the bump steer by adjusting the rear toe link pickup point up and down. Polyurethane Mounts: Factory rubber mounts have been replaced with race car-grade black polyurethane mounts, substantially reducing movement during torque transfer and improving drivetrain performance. Key Features: Ample Underbody Access: The subframe provides more space for underbody access, facilitating easier maintenance and upgrades. Enhanced Chassis Rigidity: Constructed with a tubular frame design using T45 tubing and S355 metal sheets, this subframe bolsters chassis rigidity for superior handling. OEM Compatibility: Verkline has retained the OEM mounting points for wishbones, sway bars, brake lines, exhaust systems, and headlight range sensors, ensuring a seamless plug-and-play installation. Quality Assurance: Designed, fabricated, validated, and tested in Poland, each piece undergoes rigorous inspection by trained staff. Weldings are rigorously checked for cracks, and the entire product is meticulously examined before shipping. Aesthetically Pleasing: In addition to exceptional performance, the subframe boasts a visually appealing design that complements the vehicle's overall aesthetics. Included Components: Pre-assembled rear subframe powder coated in black (other color options available for an additional cost). Set of steel lockout wishbone positioning shims (24 pcs.) for precise Toe Link positioning and bump steer adjustment. Bolt and nut kit for easy installation of Toe Links (Zinc plated, grade 10.9). Set of steel lockout wishbone positioning shims (8 pcs.) for precise Camber wishbones positioning. Race polyurethane mounts for the rear differential. Mounting bolt for the exhaust system (Zinc plated, grade 10.9). Comprehensive printed installation instructions for a trouble-free setup. Elevate your vehicle's performance with Verkline's New Lightweight Tubular Adjustable Rear Subframe, which offers substantial weight reduction, improved handling, and enhanced rigidity. This innovative subframe ensures a precise, responsive, and high-performance driving experience. OEM Replacements for: – 33316794865 – 33316795830 – 51206WAA04 – 51206WAA05 Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29 Key Benefits: Significant Weight Reduction: This lightweight subframe is 6.5 kg lighter than the OEM rear subframe, resulting in a remarkable 33% reduction in weight on the rear axle, delivering enhanced vehicle performance. Optimized Rear Final Drive Position: The rear final drive has been strategically repositioned 10 mm upward to alleviate stress on the C.V. joints. This adjustment safeguards against premature joint wear, especially when lowering the vehicle. Robust Mounting: The subframe has eliminated rubber mounts in favor of a single, bolted mounting position. This design choice prevents rear subframe shifts during high-load situations. Bump Steer Adjustment: The subframe is equipped with additional bump steer adjustment capabilities, enabling users to fine-tune the bump steer by adjusting the rear toe link pickup point up and down. Polyurethane Mounts: Factory rubber mounts have been replaced with race car-grade black polyurethane mounts, substantially reducing movement during torque transfer and improving drivetrain performance. Key Features: Ample Underbody Access: The subframe provides more space for underbody access, facilitating easier maintenance and upgrades. Enhanced Chassis Rigidity: Constructed with a tubular frame design using T45 tubing and S355 metal sheets, this subframe bolsters chassis rigidity for superior handling. OEM Compatibility: Verkline has retained the OEM mounting points for wishbones, sway bars, brake lines, exhaust systems, and headlight range sensors, ensuring a seamless plug-and-play installation. Quality Assurance: Designed, fabricated, validated, and tested in Poland, each piece undergoes rigorous inspection by trained staff. Weldings are rigorously checked for cracks, and the entire product is meticulously examined before shipping. Aesthetically Pleasing: In addition to exceptional performance, the subframe boasts a visually appealing design that complements the vehicle's overall aesthetics. Included Components: Pre-assembled rear subframe powder coated in black (other color options available for an additional cost). Set of steel lockout wishbone positioning shims (24 pcs.) for precise Toe Link positioning and bump steer adjustment. Bolt and nut kit for easy installation of Toe Links (Zinc plated, grade 10.9). Set of steel lockout wishbone positioning shims (8 pcs.) for precise Camber wishbones positioning. Race polyurethane mounts for the rear differential. Mounting bolt for the exhaust system (Zinc plated, grade 10.9). Comprehensive printed installation instructions for a trouble-free setup. Elevate your vehicle's performance with Verkline's New Lightweight Tubular Adjustable Rear Subframe, which offers substantial weight reduction, improved handling, and enhanced rigidity. This innovative subframe ensures a precise, responsive, and high-performance driving experience. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts

Sub-Categories

5100 Series Shock Absorbers for MINI

Benefits:

BMW F8X M2 M3 M4 Chassis Bracing

Benefits:

Key Features of ALTA Rear Control Arms:

MINI R Chassis Positive Steering Response System (PSRS) w/Urethane Bushing

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results