BMW Suspension Parts

OEM TRW Front Right Control Arm - E82 1 M Coupe, E9X M3

T#:304215

Part#: 31102283578

Ships in 5 Business Days

$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Improve your BMW's driving experience by addressing the wear and tear caused by years on the road. The suspension takes a beating from pot holes, speed bumps, and road hazards, leading to a weakened and sloppy feel. Enhance safety and ride comfort by replacing worn components, such as the control arm.

Improved driving experience and ride comfort
Enhanced safety through the replacement of worn suspension components
Non-serviceable ball joints and other components addressed for prolonged lifespan
Control arm replacement for a better feel and handling
Recommended replacement in pairs for optimal performance
Suitable for both front and rear suspension upgrades
Referred to as a wishbone by BMW
Performance upgrade for non-M3 models, recommended to replace in pairs due to heavy-duty nature

Show More Show Less

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

T#:3666

Part#: JTD909

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

OEM TRW Front Left Control Arm - E82 1 M Coupe, E9X M3

T#:304217

Part#: 31102283577

In Stock

42% off MSRP $ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

42% off MSRP

$ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Enhance your driving experience with our premium suspension upgrade for your BMW. Over time, the road can take a toll on your suspension, leading to a sloppy and weak feel while driving. Our solution? Replace the control arm – a critical component that, after years of service, may wear out. Boost safety and ride comfort with this easy upgrade.

Improved driving experience
Enhanced safety
Better ride comfort
Extended service life of replacement parts

If you're considering replacing any part of your front or rear suspension, opt for doing it in pairs (both left and right sides). This ensures optimal performance and longevity of the replacement parts. In the BMW world, it's often referred to as a wishbone.

For non-M3 models, this isn't just a replacement – it's a performance upgrade. These heavy-duty components are recommended to be replaced in pairs to maximize their efficiency and provide a seamless driving experience.

Show More Show Less

OEM TRW Front Upper Control Arm - Left - E82 1M, E9X M3

T#:304216

Part#: 31102283575

In Stock

$ 90.99 USD

Add to Wish List

Qty

$ 90.99 USD

Add to Wish List

This left/driver's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard ...

T#:27938407

Part#: FLM-G8X-1FECOTOE

In Stock

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
Simplified Setup: Eases camber adjustment and simplifies alignment processes.
Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

G80 / G81 / G82 / G83 M3 & M4
F80 / F82 M3 & M4
G87 M2
F87 M2

Show More Show Less

TRW Front Thrust arm - Left - F22, F23, F30, F32, F33, F36

T#:395054

Part#: 31126855741

Back Ordered

$ 133.99

This product was last offered at the strikethrough price on
03-06-2026

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

Thrust arm with ball joint

TRW M3/1M Front Control Arm Upgrade Kit - with Level Sensor Rod - BMW...

Will add about .75 degrees of negative camber to the front for improved handling and tire wear

T#:557629

Part#: 31102283577MKT1

Ships in 5 Business Days

$ 430.04

This product was last offered at the strikethrough price on
04-28-2026

$ 401.28 USD

Add to Wish List

Qty

$ 401.28 USD

Add to Wish List

The M3 control arm upgrade is for people who want a very serious change in the ride/handling of the car. These are the factory OEM E9X M3 upper control arms, so the ride will not be much different than a standard M3. But it is a very large jump compared to the stock E9X arms and bushings, since they are not fluid-filled and have a harder rubber compound than the stock or Meyle HD bushings. These are direct replacements for the original arms, do not require any modification to install, and will add about .75 degrees of negative camber to the front for improved handling and tire wear

Show More Show Less

TRW Right Rear Wishbone

T#:348929

Part#: 33322283546

In Stock

$ 136.14

This product was last offered at the strikethrough price on
04-27-2026

$ 67.36 USD

Add to Wish List

Qty

$ 67.36 USD

Add to Wish List

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

33322283546

TRW Rear Guide Rod - Right - E82, E90, E92, E93

T#:341238

Part#: 33322283548

In Stock

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Connects the spindle assembly to the rear subframe

TRW Left Rear Wishbone

T#:348928

Part#: 33322283545

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

33322283545

TRW Rear Guide Rod - Left - E82, E90, E92, E93

T#:348950

Part#: 33322283547

Ships in 1 Business Day

$ 175.52

This product was last offered at the strikethrough price on
03-17-2026

$ 78.06 USD

Add to Wish List

Qty

$ 78.06 USD

Add to Wish List

Connects the spindle assembly to the rear subframe

TRW Front Thrust arm - Right - F22, F23, F30, F32, F33, F36

T#:395053

Part#: 31126855742

In Stock

$ 127.99

This product was last offered at the strikethrough price on
03-10-2026

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

Thrust arm with ball joint

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit

T#:5580987

Part#: FLM-F87-1BFLINK

Back Ordered

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.

Show More Show Less

Fall-Line Motorsports Lower Coil Over Camber Arm & Shim Set - G8X / F...

T#:20979735

Part#: F8X/E9X-1FLCOCA

Back Ordered

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs

Show More Show Less

M3/1M Upper Control Arm Upgrade Kit - Rear

T#:341241

Part#: 33322283547KT4

Ships in 1 Business Day

$ 600.99

This product was last offered at the strikethrough price on
03-13-2026

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

Show More Show Less

OEM TRW Front Thrust Arm Set - F22/23 F3X

T#:395055

Part#: 31126855742KT

Back Ordered

$ 260.99

This product was last offered at the strikethrough price on
03-06-2026

$ 247.99 USD

Add to Wish List

Qty

$ 247.99 USD

Add to Wish List

The thrust arm keeps the lower wheel straight and contacting the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement.

OEM TRW Front Control Arm Kit - BMW E90/E92/E93 M3, E82 1M

T#:377447

Part#: 31102283577KT1

Ships in 5 Business Days

$ 423.99

This product was last offered at the strikethrough price on
04-28-2026

$ 382.99 USD

Add to Wish List

Qty

$ 382.99 USD

Add to Wish List

Over the years, the road takes a serious toll on your suspension. Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience and improve safety and ride comfort, replace suspension components as they wear. After years of service, non-serviceable ball joints and other components begin to wear out. Because some components cannot be replaced, the only solution is the replacement of the entire arm. This OEM TRW kit includes all four front control arms for the E9X M3 / E82 1M. Replacing all four at once will provide the most service life out of replacement parts and ensure they are all performing properly. This kit is intended for installation on Halogen headlight-equipped models, as a headlight level sensor rod is not included.

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Sway Bar End Link Kit - V2 ...

T#:28038192

Part#: FLM-F8X-G8X-1BRL

Ships in 1 Business Day

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Lower Control Arm Bearing Set - ...

T#:28038181

Part#: FLM-G8X-1BLCABO

Ships in 1 Business Day

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Experience championship-caliber performance with Fall-Line's Lower Control Arm Bearings, proudly Made in the USA. From years of competitive racing, Fall-Line is synonymous with producing top-tier suspension components that excel on the track. The weak link in the latest M Cars' rear camber arms is the rubber bushings, but Fall-Line's new lower control arm bearings offer a game-changing solution. This SKU replaces OEM BMW Part number: 33326792553 Key Features: Designed for all G8X and F8X M cars DMG Mori 5-Axis CNC machined for precision Full stainless bearing assembly including hats, bearings, housing, and spiral locks Sold in pairs; designed to replace the rear control/camber arm outer bearings (BMW Part Number: 33-32-6-792-553) By eliminating rubber from this critical feedback area, Fall-Line provides control over the tire's behavior and confidence behind the wheel at the limit. These bearings feature the largest FK spherical bearings on the market, ensuring strength and longevity even under competition-level loads. Stainless steel spiral locks offer 360 degrees of clamping force, securing the bearing from any potential movement. As a bonus, these spherical bearings outlast OEM rubber variants, eliminating the headache of repeated replacements over your ownership. Please note that, as with any elimination of suspension bushings, there may be a slight increase in noise, vibration, and harshness after installation. Upgrade your suspension with Fall-Line's Lower Control Arm Bearings and take your driving experience to the next level. Invest in championship-level performance with Fall-Line, the trusted name in motorsport.

Show More Show Less

Fall-Line Motorsports G8X M2 / M3 / M4 Front Monoball Conversion ...

T#:27938406

Part#: FLM-G8X-1BUNI

Ships in 1 Business Day

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Upgrade your BMW's front suspension with our premium Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. This kit offers an advanced spherical bearing conversion, enhancing the performance of the bushing found within OEM BMW Part number: 31-10-8-095-668. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the car is put through its paces Made in the USA! Key Features: Spherical bearing conversion kit designed for precision and performance. Enhanced control and steering response without compromising ride comfort. Directly compatible with OEM BMW Part number: 31108095668. Perfectly complements G8X M3 and M4 models. Crafted with premium materials for long-lasting durability. Ideal for enthusiasts seeking improved handling during aggressive driving and track use. Take your BMW's performance to the next level with the Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. Elevate your driving experience today with this high-quality upgrade. Get yours now and experience the difference!

Show More Show Less

Fall-Line Motorsports E9X M3 / E82 1M Billet Aluminum Rear Trailing A...

T#:28038203

Part#: FLM-E9X-1FRTAK

Back Ordered

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

Fall-Line Motorsports E9X M3 / E82 1M Adjustable Toe Arm Set - Standa...

T#:28038216

Part#: FLM-E9X-1FECOTOE

Back Ordered

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The standard toe link kit by Fall Line Motorsports is designed to simplify toe changes at an alignment facility while still keeping cost reasonable. The standard toe link kit keeps costs down by using a traditional jam nut design in a sturdy billet arm. Adjustable threaded rod ends turn into and out of the arm for a wide range of toe adjustment, and enable an alignment technician to easily set toe on a lowered car.

Show More Show Less

Rear Lower Control Arm Bearing Set - Outer - E9X M3/E82 1M

T#:5580972

Part#: FLM-E9X-1BLCABO

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Rear Lower Control Arm Cup Subframe Bearing Set - E9X M3/E82 1M ...

T#:5580971

Part#: F8X-1BLCASB

Back Ordered

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Front Upper Control Arm - Right - E82, E89, E9X

T#:3182

Part#: 31126769798

Ships on Sep 9, 2026

$ 157.11 USD

Add to Wish List

Qty

$ 157.11 USD

Add to Wish List

This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OEM replacement and fits all non-Xi BMW E90 E92 E93 325i 328i 330i 335i models, E82 128i 135i, and E89 Z4. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer at a fraction of the cost for the OE BMW part.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i 335is
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Front Upper Control Arm - Left - E63 - Direct Replacement

T#:2342

Part#: 31126774829

In Stock at Vendor

$ 170.99

This product was last offered at the strikethrough price on
03-01-2026

$ 152.99 USD

Add to Wish List

Qty

$ 152.99 USD

Add to Wish List

This upper front control arm (also known as a thrust arm or tension strut) is a direct replacement for the original part and is TRW brand.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

This item fits the following BMWs:
2004+ E63 6 Series BMW 645ci 650i M6
2004+ E64 6 Series BMW 645ci Convertible 650i Convertible M6 Convertible

Show More Show Less

Rear Upper Adjustable Lateral Straight Links

T#:22525950

Part#: WAS-422

In Stock

Sale - Save 21% $ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Qty

Sale - Save 21%

$ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Verkline is excited to introduce their Rear Upper Adjustable Lateral Straight Links, the culmination of an extensive development and testing process. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, FEA (Finite Element Analysis) testing, and rigorous road trials. Now, enthusiasts have the opportunity to elevate their driving experience with these high-performance parts. Notable Advantages: Bump Steer and Anti-Squat Adjustability: Users can fine-tune their vehicle's bump steer and anti-squat characteristics for enhanced handling precision. Extended Camber Adjustment Range: These links provide a broader camber adjustment range, offering greater flexibility for alignment customization. Enhanced Strength and Rigidity: Verkline's design boasts increased strength and rigidity, resulting in an overall improvement in handling performance. Consistent Geometry: With no rubber components to flex, these links maintain consistent geometry during alignment adjustments, ensuring accuracy. Efficient Weight Design: Despite the additional functionality, these links maintain a weight profile similar to OEM components. Key Features: Bolt-In Kit: Installation is seamless, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying installation. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure durability and lightweight performance. Premium Motorsport Uniballs: These components feature high-quality motorsport uniballs for reliable and high-performance articulation. Uniball Rubber Boots: Protect against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything needed for installation is included, making setup efficient and straightforward. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. Included Components: Four T45 lightweight steel arms (two pairs) Thin locking nuts High-quality motorsport uniballs Spacer sleeves for assembling the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces the following part numbers: 33326878631 / 33326878632

Show More Show Less

TRW M3/1M Front Control Arm Upgrade Kit - w/o Level Sensor Rod - BMW ...

Will add about .75 degrees of negative camber to the front for improved handling and tire wear

T#:390706

Part#: 31102283577T

Ships in 5 Business Days

$ 423.55

This product was last offered at the strikethrough price on
04-28-2026

$ 382.96 USD

Add to Wish List

Qty

$ 382.96 USD

Add to Wish List

The M3 control arm upgrade is for people who want a very serious change in the ride/handling of the car. These are the factory OEM E9X M3 upper control arms, so the ride will not be much different than a standard M3. But it is a very large jump compared to the stock E9X arms and bushings, since they are not fluid-filled and have a harder rubber compound than the stock or Meyle HD bushings. These are direct replacements for the original arms, do not require any modification to install, and will add about .75 degrees of negative camber to the front for improved handling and tire wear

Show More Show Less

Rear Sway Bar End Links - G20 / G29 / A90 / A91

T#:22525948

Part#: WAS-427

In Stock

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Verkline is dedicated to delivering top-tier quality to enhance your driving experience. Their rear sway bar end links are the result of meticulous engineering, starting with a comprehensive 3D laser scan of your vehicle and CAD development of the wishbone. What sets their product apart is the extensive testing it undergoes, including Finite Element Analysis (FEA) and real-world road trials, ensuring you get a premium, high-performance solution. Key Advantages: User-Friendly Adjustability: Achieve precise corner weights without sway bar preload, maintaining consistent suspension heights for improved handling. Enhanced Strength and Rigidity: Enjoy a substantial increase in strength, which translates to superior handling performance. Replaceable High-Quality Uniballs: Say goodbye to the inconvenience of replacing the entire link due to ball joint wear. Our easily obtainable, high-quality uniballs make maintenance hassle-free. Outstanding Features: Bolt-In Installation: No need for vehicle modifications; our kit is designed for straightforward installation. Pre-Assembled Links: Ready to install out of the box, saving you time and effort. Robust High-Strength Pins: Precision-machined from high-strength steel for long-lasting durability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, ensuring top-notch quality and resilience. High-Quality Spherical Bearings and Uniballs: Offering exceptional articulation to prevent bending in any suspension setup. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of your end links. Comprehensive Mounting Kit: Everything you need for a seamless installation is included. OEM Sway Bar and Upright Compatibility: Seamlessly integrates with your existing setup. What's Included: A pair of CNC billet 6082 aluminum front sway bar links turnbuckles (two pieces) Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33506785607 / 33506785608 48830-WAA01

Show More Show Less

Rear Sway Bar End Link Kit - E9X M3/E82 1M

T#:5580964

Part#: E9X-1BRLINK

In Stock

$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD

Limited Qty Sale

Add to Wish List

Adjustable sway bar end links are an absolutely critical component for anyone who is serious about extracting the best possible handling from their M car. By varying the length of each link slightly, the alignment technician can ensure that the sway bar is completely unloaded and unstressed at static ride height, giving the car excellent chassis dynamics and truly even corner balance.

Show More Show Less

Control Arm - Right

T#:594010

Part#: 33326770060

In Stock

Sale - Save 25% $ 121.08

This product was last offered at the strikethrough price on
05-03-2026

$ 91.32 USD

Add to Wish List

Qty

Sale - Save 25%

$ 121.08

This product was last offered at the strikethrough price on
05-03-2026

$ 91.32 USD

Add to Wish List

One item to replace is the control arm. After years of service, the non-serviceable ball joints and other components can begin to wear out. Because some components cannot be replaced, the only solution is replacement of the entire arm.

Show More Show Less

Front Upper Control Arm - Right - E63 - Direct Replacement

T#:2347

Part#: 31126774830

In Stock at Vendor

$ 196.99

This product was last offered at the strikethrough price on
07-30-2026

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

This upper front control arm (also known as a thrust arm or tension strut) is a direct replacement for the original part and is TRW brand.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

This item fits the following BMWs:
2004+ E63 6 Series BMW 645ci 650i M6
2004+ E64 6 Series BMW 645ci Convertible 650i Convertible M6 Convertible

Show More Show Less

OEM TRW Front Control Arm Kit - BMW E90/E92/E93 M3, E82 1M

T#:341225

Part#: 31102283577MKT

Ships in 5 Business Days

$ 441.87

This product was last offered at the strikethrough price on
04-28-2026

$ 401.28 USD

Add to Wish List

Qty

$ 401.28 USD

Add to Wish List

Over the years, the road takes a serious toll on your suspension. Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience and improve safety and ride comfort, replace suspension components as they wear. After years of service, non-serviceable ball joints and other components begin to wear out. Because some components cannot be replaced, the only solution is the replacement of the entire arm. This OEM TRW kit includes all four front control arms for the E9X M3 / E82 1M. Replacing all four at once will provide the most service life out of replacement parts and ensure they are all performing properly. This kit also includes a front replacement headlight level sensor rod, which should be replaced any time the control arms are replaced on Xenon (HID) headlight-equipped models.

Show More Show Less

Rear Upper Control Arm Set - F8X

T#:5580939

Part#: FLM-F8XWUAK

In Stock

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine-tuning within the full-suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.

Show More Show Less

Front Upper Control Arm - Right - E60 Xi - Direct Replacement ...

T#:1915

Part#: 31106770686

Ships in 1-2 days

$ 155.99 USD

Add to Wish List

Qty

$ 155.99 USD

Add to Wish List

This upper front control arm (BMW may call it a thrust arm or tension strut) comes with the inner bushings and is a direct replacement for the original part, made by Tier 1 supplier TRW.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

This arm includes the inner rubber bushing but the outer ball joint is sold separately.

This item fits the following BMWs:
2004-2010 E60 5 Series 525xi 528xi 530xi 535xi & xDrive models

Show More Show Less

Rear Upper Adjustable Lateral Bent Links - G20 / G29 / A90 / A91 ...

T#:22525951

Part#: WAS-423

Ships in 10 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Verkline proudly introduces their Rear Upper Adjustable Lateral Bent Links, the result of a comprehensive development and testing program. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with these high-performance parts. Key Advantages: User-Friendly Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings, enabling precise alignment adjustments for improved handling. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these links maintain unaltered geometry during alignment adjustments, ensuring precision. Efficient Weight Design: Despite the added functionality, these links maintain a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications, ensuring a hassle-free setup. Pre-Assembled Wishbone: The wishbone comes pre-assembled with a predefined length, simplifying the installation process. CNC Machined Arm: Expertly crafted from 6082 T6 aluminum, these arms offer superior strength and durability. High-Quality Motorsport Uniballs and Spherical Bearings: These components feature top-tier uniballs and spherical bearings, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum wishbones (camber arms) Two pairs of CNC machined high-strength steel adjustment turnbuckles Thin locking nuts High-quality motorsport uniballs and spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33326881199

Show More Show Less

Fall-Line Motorsports G8x / F8x M2 / M3 / M4 Rear Upper Control Arm B...

T#:27938412

Part#: FLM-G8X-1BRUCA

Back Ordered

$ 385.00 USD

Add to Wish List

Qty

$ 385.00 USD

Add to Wish List

MADE IN THE USA. Rubber bushings found in the G8X’s rear upper arms are the last weak link in an otherwise rigid suspension. The original BMW bushings yield to cornering forces applied to the suspension, resulting in camber and toe change that is not ideal for performance driving. Fall Line’s kit replaces the soft upper control arm bushings with spherical bearings, enabling the rear suspension arms to move smoothly through their travel and giving the rear of a car a more solid, planted feel. The reduced geometry change allows for the car to retain its desired alignment, maintaining better control over the tire’s behavior under heavy load. Designed to replace the inner bushings of the rear upper control arms; BMW Part Numbers: 33322284777, 33329504611, and 33329504612. The BMW M cars feature a subframe that is directly mounted to the chassis by BMW M, to reduce suspension compliance and improve performance and driving feel. Similarly, the Fall Line upper control arm bearings rigidly mount the suspension arms to the subframe, increasing driver feedback, reducing geometry change, and improving performance. As with any elimination of suspension bushings, more feedback does equate to more road and suspension noise. While the Fall Line rear upper control arm bearings are a substantial performance improvement, please do be prepared for increased noise, vibration, and harshness after installing the parts. Product Details: DMG Mori 5-Axis CNC machined Full stainless bearing assembly (hats, bearing, housing, spiral locks) Price is per set of 4 (2 per side); designed to replace the inner bushings of the rear upper control arms (BMW Part Numbers: 33-32-2-284-777, 33-32-9-504-611, & 33-32-9-504-612)

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Lower Tension / Fixed Toe Arm Se...

T#:27938408

Part#: FLM-G8X-1FRTAK

Ships in 3 Business Days

$ 679.99 USD

Add to Wish List

Qty

$ 679.99 USD

Add to Wish List

This item can function as the Rear Lower Tension Arm, as well as a Fixed Toe Arm. This SKU replaces OEM BMW Part number: 33322284534 Experience championship-level performance with Fall-Line Motorsports' precision-engineered suspension components. Crafted from aircraft-grade billet aluminum and finished with military-spec hard coat anodizing, these components are designed to elevate your driving experience to victory. Improved Handling and Durability Fall-Line's F8X / G8X lower tension arms and fixed toe arms are built to excel in motorsport conditions. Their CNC-machined, one-piece construction ensures both strength and longevity. Featuring the largest FK spherical bearings on the market, these arms eliminate rubber from critical areas, giving you ultimate control over your car's tire behavior and enhancing your confidence behind the wheel. Stainless steel spiral locks provide 360-degree clamping force for a secure fit under competition-level loads. Long-Lasting Performance Our spherical bearings outlast OEM rubber variants, sparing you the hassle of repeated replacements. While these suspension upgrades offer improved feedback and handling, they may result in a slight increase in noise, vibration, and harshness. Product Details: Compatible with all G8X and F8X M cars DMG Mori 5-Axis CNC machined 6061-T6 aluminum Full stainless bearing assembly (hats, bearing, housing, spiral locks) Sold in pairs; designed to replace rear trailing/tension arms (BMW Part Number: 33-32-2-284-534) MIL Spec hard coat clear anodizing Made in the USA Fixed toe arms retain factory Eccentric bolt adjustment

Show More Show Less

Fall-Line Motorsports F8X M2 / M3 / M4 Rear Upper Control Arm Set ...

T#:28038190

Part#: FLM-F8X-1FWUAK

In Stock

$ 1,040.00 USD

Add to Wish List

Qty

$ 1,040.00 USD

Add to Wish List

From years of competitive race experience, Fall-Line has become synonymous with producing not only championship caliber race cars, but the finest suspension components that help propel them to victory. As the final piece within Fall-Line’s suite of rear suspension offerings for the F8X M2 / M3 / M4, these upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine tuning within the full suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions. These arms are direct replacements for BMW Part No. 33322284777. The F8X cars will notice an immediate difference due to its unique subframe and chassis relationship—torsional rigidity is further improved with the addition of these arms with only marginal increases in NVH. As an added benefit, the spherical bearings will outlast the OEM rubber variants, saving the headache of repeated replacement over your ownership. Product Details: Fits all F8X M2 / M3 / M4 Motorsport clamp-style fastener for faster, more reliable alignment adjustments Long-life FK spherical bearings Made in USA Replaces OEM BMW Part Numbers: 33-32-2-284-777

Show More Show Less

Fall-Line Motorsports E9X M3 / E82 1M Rear Sway Bar End Link Kit - V2...

T#:28038220

Part#: FLM-E9X-1BRLINK

Ships in 3 Business Days

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: New V2 photos coming soon! V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair

Show More Show Less

Fall-Line Motorsports E9X M3 / E82 1M Front Mono Ball Conversion Kit ...

T#:28038194

Part#: FLM-E9X-1BUNI

In Stock

$ 423.00 USD

Add to Wish List

Qty

$ 423.00 USD

Add to Wish List

Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M3’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M3. *V2 improved design also incorporates hard coat clear anodized finish*

Show More Show Less

TRW Front Lower Control Arm - Right - F30

T#:593199

Part#: 31126852992

In Stock at Vendor

$ 96.99

This product was last offered at the strikethrough price on
05-07-2026

$ 93.99 USD

Add to Wish List

Qty

$ 93.99 USD

Add to Wish List

Includes bushing and ball joint

Rear Spring Wishbone Bushings With Lockout Kit - G20 / G29 / A90 / A9...

T#:22492999

Part#: WAS-425

Special Order: No Guaranteed ETA

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock the full potential of your BMW G20, G29, and Supra A90/A91 with Verkline's rear spring wishbone bushings. This product is the culmination of extensive development and testing, featuring 3D laser scanning, CAD design, FEA analysis, and rigorous road trials. Experience a range of benefits, including: Enhanced strength and rigidity for superior handling performance Eliminate rubber deformations, preserving precise alignment during maintenance Key Features: A user-friendly bolt-in kit that requires no vehicle modifications Pre-assembled inserts for straightforward installation Included tool to prevent wishbone bending during insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with high-quality motorsport spherical bearings Comprehensive kit with all necessary components for seamless mounting Compatible with OEM wishbone and subframe components Please note that if you use lockout plates to block wishbone movement on the subframe, it's essential to correct the camber setting within the adjustable upper bent link. What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for arm assembly with the subframe A tool to prevent wishbone bending during insert replacement Printed installation instructions Fits these BMW models: BMW G20 330i, M340i BMW G29 Z4 M40i, 30i Toyota Supra A90 / A91

Show More Show Less

Fall-Line Motorsports Front Mono Ball Conversion Kit - F87 M2 ...

T#:598880

Part#: FLM-F87-1BUNI

Ships in 1 Business Day

$ 423.00 USD

Add to Wish List

Qty

$ 423.00 USD

Add to Wish List

Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M2. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M2 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M2’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M2.

Show More Show Less

Front Caster Adjustable Control Arms - Toyota Supra A90 / A91 ...

T#:22525953

Part#: WAS-410

Ships in 10 Business Days

$ 1,199.00 USD

Add to Wish List

Qty

$ 1,199.00 USD

Add to Wish List

Verkline is pleased to present the Front Adjustable Caster Arm, a product that has undergone extensive development and rigorous testing. This cutting-edge component is the result of a comprehensive process, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with this high-performance caster arm. Key Benefits: Effortless Caster Adjustability: Enthusiasts can easily fine-tune their caster settings using a turnbuckle jackscrew, allowing for precise alignment customization. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, delivering improved handling performance. Consistent Geometry: With no rubber components to flex, this caster arm maintains unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings for convenience. Efficient Weight Design: Despite offering additional functionality, this caster arm maintains a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings: These bearings provide increased articulation capability, ensuring reliability. Wishbone Protection: Designed to prevent extensive side-swinging, reducing the risk of collisions with the knuckle or steering rod. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (caster arms) Two pairs of CNC billet 6082 aluminum arm mounts Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts Four high-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Caster Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

Rear Adjustable Toe Links With Lockout Kit - G20 / G29 / A90 / A91 ...

T#:22492998

Part#: WAS-424

Ships in 2 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Verkline proudly offers a top-notch solution for BMW G20, G29, and Supra A90/A91 enthusiasts – our high-performance rear spring wishbone bushings. These precision-engineered components have undergone meticulous development, including 3D laser scanning, CAD design, FEA testing, and demanding road trials, ensuring uncompromising quality. With this kit, you can effortlessly upgrade the second bearing (number 13 on the picture) from rubber to uniball, perfectly complementing the factory uniball (mount number 18 on the picture). Enjoy a wide array of benefits, including: Augmented strength and rigidity for unmatched handling performance Maintain precise geometry during alignments by eliminating rubber deformation Key Features: A user-friendly bolt-in kit, requiring no vehicle modifications Pre-assembled inserts for a hassle-free installation Includes a specialized tool for easy insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with top-quality motorsport spherical bearings A comprehensive kit with all necessary components for straightforward mounting Compatible with OEM wishbone and upright components What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for upright and arm assembly A tool for easy insert replacement Printed installation instructions Fits these BMW models: BMW G20 BMW G29 Toyota Supra A90 / A91

Show More Show Less

Front Bump Steer Adjustable Tie Rod Ends - Toyota Supra A90 / A91 ...

T#:22525957

Part#: WAS-412

Ships in 10 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Verkline is proud to unveil their Front Bump Steer Adjustable Tie Rod Ends, the culmination of extensive development and rigorous testing. These cutting-edge components have undergone a meticulous journey, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with these high-performance tie rod ends. Key Advantages: User-Friendly Length Adjustability: Enthusiasts can easily fine-tune the tie rod end's length to achieve optimal corner weights without sway bar preload, ensuring even suspension heights. Enhanced Strength and Rigidity: Verkline's design guarantees increased strength and rigidity, resulting in improved handling performance. Replaceable High-Quality Uniballs: In case of ball joint wear, there's no need to replace the entire tie rod end. Verkline utilizes easily obtainable, high-quality uniballs for convenience. Noteworthy Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Links: The tie rod ends arrive pre-assembled, simplifying the installation process. Robust Full-Length Pins: Precision-machined from high-strength steel, these pins ensure durability and reliability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, these turnbuckles offer superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coil-Over Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front tie rod ends Two pairs of CNC machined Cr-Mo upright pins Thin locking nuts High-quality motorsport spherical bearings Set of pin spacers for bump steer adjustment Printed installation instructions Automotive enthusiasts can now experience the precision and performance of Verkline's Front Bump Steer Adjustable Tie Rod Ends, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. These components are designed to be compatible with OEM sway bars and coil-over setups, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

Trailing Arm Mono Ball Conversion Kit - E36/E46 M3

T#:5580954

Part#: FLM-E46-1BUNI

Ships in 3 Business Days

$ 408.00 USD

Add to Wish List

Qty

$ 408.00 USD

Add to Wish List

Fall Line’s mono ball spherical bearing conversion kit transforms the rear suspension feel of the E46 and E36 M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results