Condor Speed Shop Stackable Rear Spring Pad Set - E30, E36 318ti, Z3 ...

T#:577554

Part#: SPGPAD

Ships in 4 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Designed to replace the stock rubber pads. Use them to adjust the ride height on the rear of your e30, e36 318ti or z3. Each set includes 3 pairs of pads of varying thickness (3.5mm, 5mm & 6mm). Use the thinnest pad for the lowest setting, or stack all 3 to raise the rear almost 15mm.

Show More Show Less

IRP Rear Shock Mount Upper Reinforcement Plates

T#:5282924

Part#: IRPRSMP-30

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. Rear shock mount reinforcement plates by IRP that fit a large number of E chassis 3 series cars between E30, E36, E46 and also the Z3 and Z4.

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

DTM Style Rear Trailing Arm Bushing Kit - w/ Fluro Motorsport Bearing...

T#:39025510

Part#: IRPDTM-30B

In Stock

$ 542.99 USD

Add to Wish List

Qty

$ 542.99 USD

Add to Wish List

Upgrade your rear trailing arms with this DTM-style adjustment kit from IRP. This kit replaces the stock bushing side of the rear trailing arm - requires cutting of the rear trailing arm and welding of the new bushings in place. Professional installation is highly recommended.

Show More Show Less

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Condor Speed Shop Rear Trailing Arm Pocket Reinforcement Plates - E36...

T#:577570

Part#: REIPLTRTAB36

Ships in 4 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Condor's Rear Trailing Arm Pocket Reinforcement Kit is one of the few kits in which the plate is not cut in the shape of a "C". A lot of companies cut them with an opening in order to have less waste when cutting. Their plates are fully connected all the way around making them stronger. This is a must-have reinforcement. The front mounting point of the rear trailing arm is a known area of failure on track driven E36s. Condor's 2-piece reinforcement plate kit reinforces the stock pocket bungs to prevent failure. Welding is required, includes rosette holes. *Does not fit 318ti.

Show More Show Less

M7 MAXX-G Heavy Duty Adjustable Swaybar Endlinks - 225-250mm (8.9-9.9...

T#:23383287

Part#: 10-510400

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.

Benefits:

Superior strength with forged alloy steel construction
Symmetric cornering performance enhancement
Bind-free suspension travel and better alignment
Adjustable length for precise chassis tuning
Corrosion-resistant black anodized finish
Proudly made in the USA

Show More Show Less

BMW Motorsport Rear Sway Bar Bushing - 14-15mm - E90 E92 E82 ...

T#:3213

Part#: 33558300883

Ships on Sep 17, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

This is the factory BMW Motorsport Group N high performance rear sway bar / swaybar bushing for cars with a 14/15mm sway bar. This heavy duty rubber bushing is stiffer than the stock bushing to improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushing.

Sold Individually

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i

Show More Show Less

Upper Strut Mount - Priced Each

We Price Match - Give Us A Call or Chat!

T#:14155796

Part#: 31 331110195

Back Ordered

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

M7 MAXX-G Heavy Duty Adjustable Swaybar Endlinks - 175-200mm (6.9-7.9...

T#:29002154

Part#: 10-510200

In Stock

$ 135.99 USD

Add to Wish List

Qty

$ 135.99 USD

Add to Wish List

MAXX-G High Performance Rear Sway Bar Link Kit Billet Aluminum - Heav...

T#:26238507

Part#: 70-510100

In Stock

$ 171.99 USD

Add to Wish List

Qty

$ 171.99 USD

Add to Wish List

Enhance the handling and durability of your MINI with the M7 Speed MAXX-G High Performance Billet Aluminum Adjustable Rear Sway Bar Link Kit. This set of 2 direct replacement parts is compatible with all Gen 3 MINI Coopers and BMW X1 & X2 models. Crafted from CNC machined billet aircraft-grade aluminum, these sway bar links feature durable 90A durometer urethane bushings and forged steel adjustable tie rod ends. The design ensures over 10 times the strength and rigidity of the stock plastic parts, resulting in reduced compliance in the suspension system, improved sway bar response, and increased wheel rate for enhanced grip and control. With sealed and permanently lubricated tie rod ends and corrosion-resistant finishes, this kit guarantees longevity and performance. Upgrade your MINI's handling with the MAXX-G link kit, backed by a lifetime guarantee.

Direct replacement for stock sway bar links
Over 10 times stronger and more rigid than stock plastic parts
Improved sway bar response and increased wheel rate
Sealed and permanently lubricated tie rod ends for longevity
Corrosion-resistant finishes for durability
Lifetime guarantee for all parts

Show More Show Less

MINI R60 R61 M7 2" Lifted Suspension | Stage 1 Kit

T#:26171669

Part#: 60-555100

Ships in 4 Business Days

$ 563.99 USD

Add to Wish List

Qty

$ 563.99 USD

Add to Wish List

Upgrade your MINI Countryman or Paceman with the Stage 1 Bundle from M7 Speed, combining industry-leading suspension components for ultimate performance. This bundle includes M7's solid billet aluminum lift kit and MAXX-G adjustable sway bar links, designed specifically for the R60 Countryman and R61 Paceman models. Enjoy enhanced road clearance, improved cornering performance, and easy installation with this comprehensive bundle.

Stage 1 Bundle includes lift kit and adjustable sway bar links
Lift kit raises your MINI Countryman or Paceman by 2 inches for increased road clearance
Precision-engineered components ensure proper fitment and safe performance
Adjustable sway bar links improve cornering performance and suspension alignment
Easy bolt-on installation with all necessary hardware included

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Condor Speed Shop - Control Arm Bushings Offset - E46

21mm insert for control arm.

T#:40782367

Part#: CONTROLBUSHOFF46

Ships in 3 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Polyurethan bushings with a offset insert for control arm.

VTT G8X Carbon Fiber Strut Braces - Anodized Ends

T#:26938445

Part#: VTT-G8X-CAR-STR

Ships in 10 Business Days

Starting at $ 776.99 USD

Add to Wish List

Starting at $ 776.99 USD

Add to Wish List

We took our popular Billet G8X strut bars and redesigned them to use genuine forged carbon fiber centers. No metal with ugly carbon overlay. This is a real carbon fiber strut bar with ends that are CNC machined from 6061-T6 aluminum, and anodized in Black, Red, or Clear.

Show More Show Less

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

T#:587122

Part#: DIFE30

Ships in 3 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.

Show More Show Less

Billet Strut Cross Braces For G30 G14 G15 G16

T#:27138580

Part#: BMSG30SB

Ships on Aug 31, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 2 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

Macht Schnell Aluminum Differential Bushing Kit - E9X M3

T#:4648688

Part#: 69.10.110

Ships in 9 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Sep 1, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

T#:16474811

Part#: 193926-9G

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

Adjustable Front Camber Bushings

T#:31522921

Part#: 193616-6H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...

T#:2408491

Part#: IRPRSB-90PU

Special Order: No Guaranteed ETA

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.

Show More Show Less

M7 MAXX-G Heavy Duty Adjustable Swaybar Endlinks - 200-225mm (7.9-8.9...

T#:26404914

Part#: 10-510300

In Stock

$ 135.99 USD

Add to Wish List

Qty

$ 135.99 USD

Add to Wish List

Enhance your Mini's performance and cornering capabilities with M7 MAXX-G Adjustable Swaybar Endlinks. Designed for both lowered and raised Minis, these endlinks offer numerous benefits including symmetric cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance. The forged and heat-treated alloy steel housings with sealed ball stud and socket design ensure durability and reliability even during aggressive driving. The adjustable length allows for precise chassis tuning and optimal grip and balance. Made in the USA, these endlinks are a must-have upgrade for any Mini enthusiast.

Improves symmetric cornering performance
Provides bind-free suspension travel
Enhances suspension alignment and chassis balance
Features forged alloy steel construction for strength and durability
Adjustable length for precise chassis tuning
Easy to install and adjust with simple hand tools

Upgrade your Mini's suspension with M7 MAXX-G Adjustable Swaybar Endlinks for optimal performance on the road or track.

Show More Show Less

Rear Adjustable Control Arms BMW F2x, F3x With FLURO Motorsport Beari...

T#:26871572

Part#: IRPACNA-FXMS

Special Order: No Guaranteed ETA

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!

Show More Show Less

M7 MAXX-G Heavy Duty Adjustable Swaybar Endlinks - 250-275mm (9.9-10....

T#:28869560

Part#: 10-510500

Ships in 2 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Do you own a lowered or raised MINI? Are you seeking improved symmetric cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance? Concerned about your OEM endlinks handling the new forces from a larger sway bar? Look no further than the M7 MAXX-G Adjustable Swaybar Endlinks! The MAXX-G endlinks feature forged and heat-treated SAE 4340 alloy steel (chrome moly) housings with permanently lubricated and sealed 10mm ball studs & socket design at each end. A castle nut and cotter pin lock on each stud ensure tightness during aggressive driving. The hex-shaped military-grade aluminum body with opposing 12mm (1/2") LH & RH threads allows easy adjustment with basic hand tools, ensuring safe and simple adjustability. These endlinks provide quiet operation and durability compared to typical spherical rod ends (heim joints) that can loosen and fail quickly. If you've altered the suspension geometry by lowering or raising your MINI, a set of MAXX-G Performance Suspension links is essential to realign your sway bar and maximize bind-free suspension travel and grip. The adjustability allows for removing pre-load from your sway bar, crucial for consistent left and right-hand turning balance. **SPEED SECRET:** Intentionally pre-loading a front or rear sway bar (left or right corner) can be a potent tuning tool and a significant performance advantage, particularly on tracks favoring high-speed one-direction corners. **CAUTION:** Understand the implications before adjusting the adjusters. **FEATURES:** - Engineered to fit all MINIs. - Forged alloy steel main body for superior strength. - Permanently lubricated and sealed OEM-style ball stud & socket design. - Stronger than stock links, designed to withstand higher loads from the largest sway bar installations. - Adjustable length for precise chassis tuning and maximum grip and balance. - Main body features 12mm (1/2") diameter LH & RH threads for straightforward adjustability. - Bright Black Anodized finish for corrosion protection. - M10 stud for easy fit into stock mounting points and all stock & aftermarket sway bars. - Sold as a pair. - Proudly Made In The USA!

Show More Show Less

MINI F53 R56 M7 MAXX-G Adjustable Camber Hybrid Polymer-MonoBall Link...

T#:23383299

Part#: 10-511102

In Stock

$ 400.99 USD

Add to Wish List

Qty

$ 400.99 USD

Add to Wish List

MAXX-G Adjustable Suspension Links, designed to add bind-free travel and straightforward camber adjustments to the rear suspension of any MINI. These links feature a solid aluminum 1" hex adjuster sleeve with opposing 3/4" left-hand and right-hand threads at each end, allowing effortless camber adjustment. The exclusive Hybrid Polymer MonoBall (HPMB) link end, a groundbreaking design in the industry, combines the benefits of a rod end for suspension movement with the vibration isolation and durability of a urethane bushing.

PRODUCT BENEFITS:

Enhances cornering performance and suspension alignment
Industry-first "Hybrid Polymer MonoBall" (HPMB) link ends
Combines advantages of monoball rod ends and urethane bushings
Offers bind-free high angular misalignment with noise-free operation
Forged alloy steel main housing with a sealed polymer race for vibration dampening
Serviceable, rebuildable, and greasable
Military-grade 6061-T6 aluminum adjuster sleeve for easy length adjustments
Made in the USA & GUARANTEED for LIFE!

Show More Show Less

Rear Adjustable Swaybar Endlinks | Lowered Ride Height

T#:29002095

Part#: 60-510300

Ships in 2 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Enhance Your MINI's Suspension with M7 MAXX-G Adjustable Swaybar Endlinks

Enhance the performance of your MINI's suspension with the M7 MAXX-G Adjustable Swaybar Endlinks. Whether your MINI is lowered or raised, these endlinks offer improved cornering performance, suspension alignment, and overall chassis balance. Engineered with forged alloy steel housings and permanently lubricated ball stud & socket design, they provide durability and bind-free suspension travel. The hex-shaped aluminum body allows for easy adjustment with hand tools, ensuring safe and precise tuning. These endlinks are quieter and longer-lasting compared to typical spherical rod ends, offering superior performance and reliability.

Benefits:

Forged alloy steel main body for strength and durability
Permanently lubricated and sealed OEM style ball stud & socket design
Adjustable length for precise chassis tuning
Hex-shaped aluminum body for easy adjustment with hand tools
Bright Black Anodized for corrosion protection

Show More Show Less

BMS Billet Strut Cross Braces - G29 BMW Z4

T#:27138575

Part#: BMSZ4SB

Ships on Aug 31, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

M7 Stage II Suspension Bundle

T#:29002171

Part#: 56-5M7551

Ships in 4 Business Days

$ 716.99 USD

Add to Wish List

Qty

$ 716.99 USD

Add to Wish List

Burger Motorsports Billet Strut Cross Braces - Blue - BMW G22/G23/G26...

T#:46924998

Part#: G22BSCB-BLU

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Silver - BMW G01 X3, G02 X4,...

T#:39126854

Part#: BMSBILSCB-SIL

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - BMW G22/G23/G26 ...

T#:46924996

Part#: G22BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

M7 R60 r61 2" Lifted Suspension | Stage 2 Kit

T#:29002168

Part#: 60-555219

Ships in 4 Business Days

$ 1,015.99 USD

Add to Wish List

Qty

$ 1,015.99 USD

Add to Wish List

BMS Billet Strut Cross Braces - Anodized Red - BMW G01 X3, G02 X4, F9...

T#:39126852

Part#: BMSBILSCB-RED

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

M7 MAXX-G Heavy Duty Adjustable Swaybar Endlinks - 150-175mm (5.9-6.9...

T#:29002152

Part#: 10-510100

Ships in 4 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Burger Motorsports Billet Strut Cross Braces - Silver - BMW G22/G23/G...

T#:46924997

Part#: G22BSCB-SIL

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

M7 Strut Tower "J-Brace" MINI R5X

T#:26305131

Part#: 56-5M7104

Ships in 2 Business Days

$ 414.99 USD

Add to Wish List

Qty

$ 414.99 USD

Add to Wish List

M7 Tuning J-Brace for R56 MINI Coopers

Elevate your Mini's performance with the M7 Tuning J-Brace, specially designed for R56 MINI Coopers equipped with the factory John Cooper Works intake. This brace enhances front-end stiffness, protects strut towers from mushrooming, and adds a stylish touch to your vehicle.

Improves handling and stability
Protects strut towers from damage
Enhances the aesthetic appeal of your Mini
Easy installation process
Made from high-strength 6061-T6 aluminum alloy for durability

Note: The J-Brace has been slightly modified for the 2011-2013 model year MINI Cooper S for better clearance to stock parts. This brace does not fit the base model Cooper (non 'S' model) or the JCW GP2 model.

Show More Show Less

Loaded Rear Strut - Rear Left

T#:23681826

Part#: 883061

Ships in 3 Business Days

$ 115.99 USD

Add to Wish List

Qty

$ 115.99 USD

Add to Wish List

Not FOR JCW Suspension cars or lowered suspension over stock.

MINI R Chassis M7 MAXX-G Heavy Duty Adjustable Swaybar Endlinks - 325...

T#:29002142

Part#: 10-510800

Ships in 4 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Burger Motorsports Billet Strut Cross Braces - Black - BMW G22/G23/G2...

T#:46924999

Part#: G22BSCB-BLK

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less