Find Parts That Fit Your Vehicle

BMW Sway Bar Kits

The next step in tuning your car's handling - after shocks/springs and camber plates - should be a set of swaybars. Using larger front and rear sway bars will give your car better/quicker turn-in and less bodyroll in corners. These bars replace the existing sway bars on the car for a clean and simple upgrade with very little downside. Sway bars should be matched with your springs/shocks to maintain a proper handling balance. In some cases only a front or rear bar is needed to positively change the balance and make the car more neutral. We sell sway bar kits from H&R, Racing Dynamics, OE BMW upgrades, and even some of our own designs. Swaybars are sold with new bushings. New links and other hardware are strongly recommended.

Sub-Categories

Sort By:

Fall Line - Corporate Logo
T#:5580987
Part#: FLM-F87-1BFLINK
Ships in 10 Business Days
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

  • Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
  • Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
  • Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
  • Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
  • Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.
Show More Show Less
Fall Line - Corporate Logo
T#:28038192
Part#: FLM-F8X-G8X-1BRL
Ships in 1 Business Day
$ 198.00 USD
Free Shipping
$ 198.00 USD
Free Shipping
Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair
Show More Show Less
M7 Speed - Corporate Logo
T#:23383287
Part#: 10-510400
In Stock
$ 159.99 USD
Free Shipping on orders $49 and up

Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.

Benefits:

  • Superior strength with forged alloy steel construction
  • Symmetric cornering performance enhancement
  • Bind-free suspension travel and better alignment
  • Adjustable length for precise chassis tuning
  • Corrosion-resistant black anodized finish
  • Proudly made in the USA
Show More Show Less


M7 Speed - Corporate Logo
T#:1150753
Part#: 10-510600
Ships in 3 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Fall Line - Corporate Logo
T#:5580964
Part#: E9X-1BRLINK
In Stock
$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD
Limited Qty Sale
Free Shipping
$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD
Limited Qty Sale
Free Shipping
Adjustable sway bar end links are an absolutely critical component for anyone who is serious about extracting the best possible handling from their M car. By varying the length of each link slightly, the alignment technician can ensure that the sway bar is completely unloaded and unstressed at static ride height, giving the car excellent chassis dynamics and truly even corner balance.
Show More Show Less

Verkline - Corporate Logo
T#:22525948
Part#: WAS-427
In Stock
$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Verkline is dedicated to delivering top-tier quality to enhance your driving experience. Their rear sway bar end links are the result of meticulous engineering, starting with a comprehensive 3D laser scan of your vehicle and CAD development of the wishbone. What sets their product apart is the extensive testing it undergoes, including Finite Element Analysis (FEA) and real-world road trials, ensuring you get a premium, high-performance solution. Key Advantages: User-Friendly Adjustability: Achieve precise corner weights without sway bar preload, maintaining consistent suspension heights for improved handling. Enhanced Strength and Rigidity: Enjoy a substantial increase in strength, which translates to superior handling performance. Replaceable High-Quality Uniballs: Say goodbye to the inconvenience of replacing the entire link due to ball joint wear. Our easily obtainable, high-quality uniballs make maintenance hassle-free. Outstanding Features: Bolt-In Installation: No need for vehicle modifications; our kit is designed for straightforward installation. Pre-Assembled Links: Ready to install out of the box, saving you time and effort. Robust High-Strength Pins: Precision-machined from high-strength steel for long-lasting durability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, ensuring top-notch quality and resilience. High-Quality Spherical Bearings and Uniballs: Offering exceptional articulation to prevent bending in any suspension setup. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of your end links. Comprehensive Mounting Kit: Everything you need for a seamless installation is included. OEM Sway Bar and Upright Compatibility: Seamlessly integrates with your existing setup. What's Included: A pair of CNC billet 6082 aluminum front sway bar links turnbuckles (two pieces) Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33506785607 / 33506785608 48830-WAA01
Show More Show Less
Fall Line - Corporate Logo
T#:28038220
Part#: FLM-E9X-1BRLINK
Ships in 3 Business Days
$ 198.00 USD
Free Shipping
$ 198.00 USD
Free Shipping
Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: New V2 photos coming soon! V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair
Show More Show Less

M7 Speed - Corporate Logo
T#:26238507
Part#: 70-510100
In Stock
$ 171.99 USD
Free Shipping on orders $49 and up

Enhance the handling and durability of your MINI with the M7 Speed MAXX-G High Performance Billet Aluminum Adjustable Rear Sway Bar Link Kit. This set of 2 direct replacement parts is compatible with all Gen 3 MINI Coopers and BMW X1 & X2 models. Crafted from CNC machined billet aircraft-grade aluminum, these sway bar links feature durable 90A durometer urethane bushings and forged steel adjustable tie rod ends. The design ensures over 10 times the strength and rigidity of the stock plastic parts, resulting in reduced compliance in the suspension system, improved sway bar response, and increased wheel rate for enhanced grip and control. With sealed and permanently lubricated tie rod ends and corrosion-resistant finishes, this kit guarantees longevity and performance. Upgrade your MINI's handling with the MAXX-G link kit, backed by a lifetime guarantee.

  • Direct replacement for stock sway bar links
  • Over 10 times stronger and more rigid than stock plastic parts
  • Improved sway bar response and increased wheel rate
  • Sealed and permanently lubricated tie rod ends for longevity
  • Corrosion-resistant finishes for durability
  • Lifetime guarantee for all parts
Show More Show Less

Genuine European BMW - Corporate Logo
T#:367006
Part#: 31352282655
Special Order: No Guaranteed ETA
$ 699.99 USD
Free Shipping
$ 699.99 USD
Free Shipping
Verkline - Corporate Logo
T#:22525958
Part#: WAS-413
Back Ordered
$ 299.00 USD
Free Shipping on orders $49 and up
Verkline is delighted to introduce their Front Sway Bar End Links, a product that has undergone a meticulous development process, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. This journey of innovation has led to the creation of high-performance sway bar end links, now available for automotive enthusiasts. Key Advantages: User-Friendly Length Adjustability: These end links offer effortless length adjustment, allowing users to achieve ideal corner weights without sway bar preload and ensuring consistent suspension heights. Enhanced Strength and Rigidity: Verkline's design prioritizes increased strength and rigidity, resulting in improved handling performance and better control. Replaceable High-Quality Uniballs: In the event of ball joint wear, these end links are designed to allow the replacement of easily accessible, high-quality uniballs, eliminating the need to change the entire component. Noteworthy Features: Bolt-In Kit: The installation process is straightforward and requires no modifications, ensuring a hassle-free setup. Pre-Assembled Links: The end links are conveniently pre-assembled, simplifying the installation procedure. Robust Pins: Precision-machined from high-strength steel, the pins ensure durability and longevity. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, the turnbuckles offer excellent strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, guaranteeing reliable and high-performance articulation. Uniball Rubber Boots: Designed to protect against dust and water, these rubber boots extend the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coilover Compatibility: The design seamlessly integrates with existing setups, including OEM sway bars and coilovers. Included Components: Two pairs of CNC billet 6082 aluminum front sway bar links turnbuckles Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions With Verkline's Front Sway Bar End Links, automotive enthusiasts can now experience enhanced precision and performance, allowing them to improve their vehicle's handling and suspension for a more controlled and responsive driving experience. These components are thoughtfully designed to seamlessly integrate with OEM sway bars and coilovers, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less
Verkline - Corporate Logo
T#:22525972
Part#: WAS-400
Back Ordered
$ 7,922.99 USD
$ 7,922.99 USD
Verkline's journey to develop an exceptional suspension set for the Supra A9X and BMW Z4 G29 began from day one, and it was significantly influenced by Robert from Apex Nürburgring YouTube video. With a profound understanding of high-speed driving dynamics, Verkline collaborated with Apex to craft a suspension set that pushes the boundaries of performance. Key Components in the Full Set: Rear Lightweight Tubular Subframe (WAS-401) Front Caster Adjustable Control Arms (WAS-410) Front Lower Adjustable Control Arms (WAS-411) Front Bump Steer Adjustable Tie Rod Ends (WAS-412) Front Sway Bar End Links (WAS-413) Rear Adjustable Traction Links (WAS-421) Rear Upper Adjustable Lateral Straight Links (WAS-422) Rear Upper Adjustable Lateral Bent Links (WAS-423) Rear Adjustable Toe Links with a lockout kit (WAS-424) Rear Spring Wishbone Bushings with lockout kit (WAS-425) Rear Knuckle Bushings (WAS-426) Rear Sway Bar End Links (WAS-427) Comprehensive installation and suspension setup instructions (66 printed pages) Toyota Supra A9X and BMW Z4 G29 were designed for an exhilarating driving experience on the streets, but their factory settings may not suffice for those seeking high-performance capabilities. The issue lies in rear-end bump steer, which affects the toe angle during suspension travel. The Consequences of Bump Steer: Rear toe changes unpredictably, impacting stability and handling. During hard acceleration, the rear end tilts, resulting in toe-in. Under hard braking, the rear suspension rises, leading to toe-out. Verkline's Solution: To address these issues and enhance performance, Verkline offers three suspension setup presets (Track, Street, Drag) tailored to various driving styles. These presets provide precise alignment, ride height suggestions, and arm lengths, ensuring optimal kinematics for every designated use of the car. Say goodbye to unpredictable handling issues and experience stable and controlled driving with Verkline's Suspension Set for Toyota Supra A9X and BMW Z4 G29. Transform your car's performance with the expertise of Verkline and Apex Nürburgring. Fits these models: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29
Show More Show Less


Genuine European BMW - Corporate Logo
T#:338670
Part#: TMS16594
Ships on Feb 8, 2027
Starting at $ 335.29 USD
Free Shipping
Starting at $ 335.29 USD
Free Shipping
For the M5 3.8 BMW offered an optional Nurburgring handling package with this 20mm rear sway bar. This is currently the biggest rear sway bar available anywhere and is a direct bolt-in replacement for the stock or aftermarket bar. This bar is complete with new rubber bushings with new brackets and links optional.

The larger bar will make the suspension stiffer than before, with less roll and less understeer. The larger rear bar will actually make the rear end rotate easier making the car more agile in tight corners. If you have stock E34 (non-sport) swaybars on now this 20mm Nring bar will be a huge difference. If you have an E34 sport suspension, E34 M5, 540i M Sport, or aftermarket cars the difference will be smaller. But since BMW installed this as part of a factory handling package it will be an improvement for track, autocross, or backroad handling.

Included in this package:
  • 33552227416 - E34 M5 3.8 Nurburgring 20mm rear swaybar
  • 33552227240 - 20mm rear swaybar bushings
  • optional 33506779734 - rear swaybar bushing brackets (not required but get rid of those rusty original ones!)
  • optional 33551135307 - rear swaybar links
    This sway bar upgrade fits the following BMWs:
    1989-1995 E34 BMW 525i 530i 535i 540i M5
  • Show More Show Less
    M7 Speed - Corporate Logo
    T#:26404914
    Part#: 10-510300
    In Stock
    $ 135.99 USD
    Free Shipping on orders $49 and up

    Enhance your Mini's performance and cornering capabilities with M7 MAXX-G Adjustable Swaybar Endlinks. Designed for both lowered and raised Minis, these endlinks offer numerous benefits including symmetric cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance. The forged and heat-treated alloy steel housings with sealed ball stud and socket design ensure durability and reliability even during aggressive driving. The adjustable length allows for precise chassis tuning and optimal grip and balance. Made in the USA, these endlinks are a must-have upgrade for any Mini enthusiast.

    • Improves symmetric cornering performance
    • Provides bind-free suspension travel
    • Enhances suspension alignment and chassis balance
    • Features forged alloy steel construction for strength and durability
    • Adjustable length for precise chassis tuning
    • Easy to install and adjust with simple hand tools

    Upgrade your Mini's suspension with M7 MAXX-G Adjustable Swaybar Endlinks for optimal performance on the road or track.

    Show More Show Less
    M7 Speed - Corporate Logo
    T#:23383299
    Part#: 10-511102
    In Stock
    $ 400.99 USD
    Free Shipping on orders $49 and up

    MAXX-G Adjustable Suspension Links, designed to add bind-free travel and straightforward camber adjustments to the rear suspension of any MINI. These links feature a solid aluminum 1" hex adjuster sleeve with opposing 3/4" left-hand and right-hand threads at each end, allowing effortless camber adjustment. The exclusive Hybrid Polymer MonoBall (HPMB) link end, a groundbreaking design in the industry, combines the benefits of a rod end for suspension movement with the vibration isolation and durability of a urethane bushing.

    PRODUCT BENEFITS:

    • Enhances cornering performance and suspension alignment
    • Industry-first "Hybrid Polymer MonoBall" (HPMB) link ends
    • Combines advantages of monoball rod ends and urethane bushings
    • Offers bind-free high angular misalignment with noise-free operation
    • Forged alloy steel main housing with a sealed polymer race for vibration dampening
    • Serviceable, rebuildable, and greasable
    • Military-grade 6061-T6 aluminum adjuster sleeve for easy length adjustments
    • Made in the USA & GUARANTEED for LIFE!
    Show More Show Less

    Meyle Rear Sway Bar Link - E30 E36 E24 E28
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579250
    Part#: 3003355102
    Ships on Oct 29, 2026
    $ 13.99 USD
    Free Shipping on orders $49 and up

    Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. Meyle sway bar links are the perfect option to restore body control and eliminate knocking noises.

    As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This stock replacement sway bar / swaybar link secures the rear sway bar ends to the chassis. Over time the rubber breaks down and can cause poor handling. Alternate part number 33551124375.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1983-1989 E24 BMW 633csi 635csi M6
    1982-1987 E23 BMW 733i 735i

    Show More Show Less

    M7 Speed - Corporate Logo
    T#:29002095
    Part#: 60-510300
    Ships in 1 Business Day
    $ 159.99 USD
    Free Shipping on orders $49 and up

    Enhance Your MINI's Suspension with M7 MAXX-G Adjustable Swaybar Endlinks

    Enhance the performance of your MINI's suspension with the M7 MAXX-G Adjustable Swaybar Endlinks. Whether your MINI is lowered or raised, these endlinks offer improved cornering performance, suspension alignment, and overall chassis balance. Engineered with forged alloy steel housings and permanently lubricated ball stud & socket design, they provide durability and bind-free suspension travel. The hex-shaped aluminum body allows for easy adjustment with hand tools, ensuring safe and precise tuning. These endlinks are quieter and longer-lasting compared to typical spherical rod ends, offering superior performance and reliability.

    Benefits:

    • Forged alloy steel main body for strength and durability
    • Permanently lubricated and sealed OEM style ball stud & socket design
    • Adjustable length for precise chassis tuning
    • Hex-shaped aluminum body for easy adjustment with hand tools
    • Bright Black Anodized for corrosion protection
    Show More Show Less
    M7 Speed - Corporate Logo
    T#:28869560
    Part#: 10-510500
    Ships in 1 Business Day
    $ 159.99 USD
    Free Shipping on orders $49 and up
    Do you own a lowered or raised MINI? Are you seeking improved symmetric cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance? Concerned about your OEM endlinks handling the new forces from a larger sway bar? Look no further than the M7 MAXX-G Adjustable Swaybar Endlinks! The MAXX-G endlinks feature forged and heat-treated SAE 4340 alloy steel (chrome moly) housings with permanently lubricated and sealed 10mm ball studs & socket design at each end. A castle nut and cotter pin lock on each stud ensure tightness during aggressive driving. The hex-shaped military-grade aluminum body with opposing 12mm (1/2") LH & RH threads allows easy adjustment with basic hand tools, ensuring safe and simple adjustability. These endlinks provide quiet operation and durability compared to typical spherical rod ends (heim joints) that can loosen and fail quickly. If you've altered the suspension geometry by lowering or raising your MINI, a set of MAXX-G Performance Suspension links is essential to realign your sway bar and maximize bind-free suspension travel and grip. The adjustability allows for removing pre-load from your sway bar, crucial for consistent left and right-hand turning balance. **SPEED SECRET:** Intentionally pre-loading a front or rear sway bar (left or right corner) can be a potent tuning tool and a significant performance advantage, particularly on tracks favoring high-speed one-direction corners. **CAUTION:** Understand the implications before adjusting the adjusters. **FEATURES:** - Engineered to fit all MINIs. - Forged alloy steel main body for superior strength. - Permanently lubricated and sealed OEM-style ball stud & socket design. - Stronger than stock links, designed to withstand higher loads from the largest sway bar installations. - Adjustable length for precise chassis tuning and maximum grip and balance. - Main body features 12mm (1/2") diameter LH & RH threads for straightforward adjustability. - Bright Black Anodized finish for corrosion protection. - M10 stud for easy fit into stock mounting points and all stock & aftermarket sway bars. - Sold as a pair. - Proudly Made In The USA!
    Show More Show Less

    M7 Speed - Corporate Logo
    T#:29002168
    Part#: 60-555219
    Ships in 3 Business Days
    $ 1,015.99 USD
    Free Shipping on orders $49 and up

    Rear Rubber Mount - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594514
    Part#: 33316792872
    Ships in 2 Business Days
    $ 53.99

    This product was last offered at the strikethrough price on
    05-04-2026

    $ 51.99 USD
    Free Shipping on orders $49 and up
    $ 51.99 USD
    Free Shipping on orders $49 and up
    Located on rear Sub Frame

    M7 Speed - Corporate Logo
    T#:29002128
    Part#: 70-520122
    Ships in 3 Business Days
    $ 364.99 USD
    $ 364.99 USD
    M7 Speed - Corporate Logo
    T#:1902867
    Part#: 60-555222
    Ships in 3 Business Days
    $ 1,040.99 USD
    Free Shipping
    $ 1,040.99 USD
    Free Shipping


    M7 Speed - Corporate Logo
    T#:29002069
    Part#: 60-555919
    Ships in 3 Business Days
    $ 834.99 USD
    $ 834.99 USD

    MINI R60 R61 M7 Rally Sport Suspension Kit - Stage 1

    The ultimate upgrade for MINI enthusiasts seeking top-tier performance. Enhance your driving experience with improved handling and control, designed specifically for rally sport enthusiasts.

    • Enhanced handling and control
    • Specifically designed for rally sport enthusiasts
    • Top-tier performance upgrade
    • Tailored for MINI R60 R61 M7 models
    Show More Show Less
    M7 Speed - Corporate Logo
    T#:29002164
    Part#: 60-555322
    Ships in 3 Business Days
    $ 1,746.99 USD
    $ 1,746.99 USD

    M7 Speed - Corporate Logo
    T#:29002165
    Part#: 60-555319
    Ships in 3 Business Days
    $ 1,721.99 USD
    $ 1,721.99 USD

    M7 Speed - Corporate Logo
    T#:26305132
    Part#: 60-520119
    In Stock
    $ 315.99 USD
    $ 315.99 USD

    Introducing the MAXX-G™ Performance Suspension rear anti-roll bars, also known as sway bars, tailored for the R60 Countryman and R61 Paceman. Engineered for MAXIMUM GRIP and MAXIMUM CORNERING G-FORCE, MAXX-G™ suspension components are designed to elevate the performance and thrill of your Mini. The ANTI-ROLL-KITs effectively reduce body roll, enhancing handling and cornering grip for an exhilarating driving experience. Key features include:

    • Reduction of body roll through increased stiffness over stock bars.
    • Improved handling and cornering grip in various driving scenarios.
    • Shifts handling balance from understeer towards neutral for enhanced fun.
    • Three sets of link connection points for precise handling adjustments.
    • Made in the USA from military-grade 4130 chrome-moly alloy steel.
    • Double-coated with durable HOT YELLOW powder coat for longevity.
    • Includes high-performance urethane bushings, strap clamps, silicone grease, and locking split collars.

    Complete your suspension upgrade with the MAXX-G™ ANTI-ROLL-KIT for unparalleled performance and driving pleasure.

    Show More Show Less
    M7 Speed - Corporate Logo
    T#:28770026
    Part#: 60-555922
    Ships in 3 Business Days
    $ 859.99 USD
    $ 859.99 USD

    Enhance your Mini's performance with the MINI R60 R61 M7 R60 R61 Rally Sport Suspension Kit - Stage 1. This Stage 1 suspension kit from M7 is designed to deliver improved handling and stability for an exhilarating driving experience.

    • Specifically designed for MINI R60 and R61 models
    • Provides enhanced handling and cornering performance
    • Reduces body roll for better stability during aggressive driving
    • Improves overall ride quality and comfort
    Show More Show Less

    M7 Speed - Corporate Logo
    T#:29002166
    Part#: 60-520122
    Ships in 3 Business Days
    $ 340.99 USD
    $ 340.99 USD
    M7 Speed - Corporate Logo
    T#:50311443
    Part#: 60-556019-1
    In Stock at Vendor
    New Item
    $ 452.99 USD
    $ 452.99 USD

    M7 Speed - Corporate Logo
    T#:50311437
    Part#: 60-555922-2
    Ships in 3 Business Days
    New Item
    $ 860.99 USD
    $ 860.99 USD

    Rear Sway Bar Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594570
    Part#: 33551093663
    Ships in 1-2 days
    $ 4.03 USD
    Free Shipping on orders $49 and up
    One of the most important connections in this system is the sway bar bushings. If they are soft or worn, some of that energy going to the other side is lost from too much sway bar flex or bushing give. To keep everything tight and responsive, it's best to replace your bushings.
    Show More Show Less
    Meyle - Corporate Logo
    T#:55030851
    Part#: 3166530001
    Ships on Oct 30, 2026
    New Item
    $ 298.99 USD
    $ 298.99 USD
    This MEYLE front stabilizer bar is a premium, exact-fit replacement designed to handle the rigorous load transitions of your BMW.
    Meyle - Corporate Logo
    T#:55030853
    Part#: 3166530002
    Ships on Oct 30, 2026
    New Item
    $ 298.99 USD
    $ 298.99 USD
    Maintain original handling dynamics and baseline stability on your F-chassis BMW with this premium front stabilizer bar from Meyle.


    Front Sway Bar End Link - Left
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5958714
    Part#: 37116859653
    Special Order: No Guaranteed ETA
    $ 31.99 USD
    Free Shipping on orders $49 and up
    Replacement MEYLE-ORIGINAL: True to OE sway bar end links. Sway bar end links, sometimes called stabilizer end links, are responsible for translating force between the sway bar and the suspension of a vehicle. Most are typically constructed with ball joint style connections at each end, though some are simple bushing connections. As end links wear out, you can notice a difference in the vehicles ability to deflect roll in corners, sloppy steering when navigating imperfections in the road, audible rattling when going over bumps, and overall loss of handling characteristics. End links are typically easy to replace, a maintenance item that can be accomplished by any automotive enthusiast in possession of a safe method of lifting their vehicle and a basic tool set. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Comparable OE Cross Reference - ​ 37116857627 37116859653
    Show More Show Less
    Front Sway Bar End Link - Right
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5958720
    Part#: 37116857628
    Special Order: No Guaranteed ETA
    $ 33.99 USD
    Free Shipping on orders $49 and up
    Replacement MEYLE-ORIGINAL: True to OE sway bar end links. Sway bar end links, sometimes called stabilizer end links, are responsible for translating force between the sway bar and the suspension of a vehicle. Most are typically constructed with ball joint style connections at each end, though some are simple bushing connections. As end links wear out, you can notice a difference in the vehicles ability to deflect roll in corners, sloppy steering when navigating imperfections in the road, audible rattling when going over bumps, and overall loss of handling characteristics. End links are typically easy to replace, a maintenance item that can be accomplished by any automotive enthusiast in possession of a safe method of lifting their vehicle and a basic tool set. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Comparable OE Cross Reference - ​ 37116857628 37116859654
    Show More Show Less
    Meyle Rear Sway Bar Bushing - BMW F22/23 F3X
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:35829338
    Part#: 33356792197
    Special Order: No Guaranteed ETA
    $ 7.84 USD
    Free Shipping on orders $49 and up
    $ 7.84 USD
    Free Shipping on orders $49 and up
    The sway bar in your vehicle links both lower control arms. During cornering, the inner wheel tends to roll under, but the sway bar acts as a spring to prevent this. A critical part of this system is the sway bar bushings. If they become soft or worn, energy transfer is compromised due to excessive sway bar flex or bushing movement. To maintain tight and responsive handling, it’s essential to replace the bushings.
    Show More Show Less

    Rear Sway Bar End Link - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594572
    Part#: 33551094619
    Ships on Dec 24, 2026
    $ 15.99 USD
    Free Shipping on orders $49 and up
    The sway bar on your vehicle is essentially a connection between the left and right lower control arms. When you take a corner in your vehicle, the sway bars flex and rebound like a spring. Stock bars give a stock performance.
    Show More Show Less

    Meyle Sway Bar Bushing - E61, E82, E88
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579348
    Part#: 3146150024
    Special Order: No Guaranteed ETA
    $ 8.37 USD
    Free Shipping on orders $49 and up
    $ 8.37 USD
    Free Shipping on orders $49 and up
    Fits 12mm rear sway bar only
    Sway Bar Bushing - Rear
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5958679
    Part#: 37126771939
    Special Order: No Guaranteed ETA
    $ 8.99 USD
    Free Shipping on orders $49 and up
    Inner sway bar bracket bushings for rear sway bar. Meyle OE style rubber bushings meet or exceed OE quality and reliability. ​Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Inner diameter 1 [mm]50 mm Inner diameter 2 [mm]58,5 mm Required quantity2 Comparable OE Cross Reference - 37126771939
    Show More Show Less

    Rear Stabilizer Link
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5944114
    Part#: 33506861482
    Special Order: No Guaranteed ETA
    $ 25.99 USD
    Free Shipping on orders $49 and up
    $ 25.99 USD
    Free Shipping on orders $49 and up
    For the rear sway bar. Replace faulty or damaged sway bar links to restore stability and safety on the road. Meyle's quality replacement sway bar links are engineered to meet or exceed OE performance and reliability. Length - 140mm Thread - M12x1.5
    Show More Show Less
    Front Sway Bar Bushing - Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594571
    Part#: 31351094554
    Special Order: No Guaranteed ETA
    $ 11.99 USD
    Free Shipping on orders $49 and up
    $ 11.99 USD
    Free Shipping on orders $49 and up
    One of the most important connections in this system is the sway bar bushings. If they are soft or worn, some of that energy going to the other side is lost from too much sway bar flex or bushing give. To keep everything tight and responsive, it's best to replace your bushings.
    Show More Show Less

    Front Stabilizer End Link - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:36438832
    Part#: 31356778831
    Special Order: No Guaranteed ETA
    $ 20.99 USD
    Free Shipping on orders $49 and up

    Meyle Rear Sway Bar End Link - E39
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579251
    Part#: 3003355105
    Ships on Dec 24, 2026
    $ 18.99 USD
    Free Shipping on orders $49 and up

    Replacement REAR sway bar / swaybar link for all 1997-2003 5 series sedans and wagons. Made by Meyle, this is a very common wear item in the E39 suspension, especially when the car has been driven hard. While replacing this part, also check the sway bar bushing bracket for signs of stress or failure. It can be used on both the left and right side of the car. Two required per car, and are sold individually.

    As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i 540i M5

    Show More Show Less
    Rear Sway Bar Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:35964542
    Part#: 33556776559
    Special Order: No Guaranteed ETA
    $ 14.99 USD
    Free Shipping on orders $49 and up
    The sway bar bushing acts as a secure mount for the sway bar while reducing the translation of vibration to the chassis, and ultimately, to the driver. If any wear is detected, replace them for reassurance that your vehicle's handling is not being sacrificed by such a simple part to replace.
    Show More Show Less
    Sway Bar Bushing - Rear
    We Price Match - Give Us A Call or Chat! For vehicles without Electronic Damper Control (EDC)
    Meyle - Corporate Logo
    T#:5958727
    Part#: 33556788058
    Special Order: No Guaranteed ETA
    $ 10.99 USD
    Free Shipping on orders $49 and up
    MEYLE-ORIGINAL: True to OE sway bar bushing Sway bar bracket bushings attach the sway bar to the body of the vehicle. Worn or cracked bushings can allow the bar to have too much play, preventing it from doing its job properly. Cracked or damaged bushings should be replaced. This typically requires the removal of the sway bar, depending on the application. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Fitting Position - Rear Axle Right, Rear Axle Left Inner diameter [mm]17.5 mm Stabilizer Diameter [mm]18.5 mm Comparable OE Cross Reference - 33556788058
    Show More Show Less