BMW Sway Bar Kits

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

Black anodized billet sway bar end links to replace your flimsy and corroded factory units. Removable hardware for a lifetime serviceable component!

Your factory end link brackets are a one piece design with an integrated stud made of flimsy metal with no coating to protect from the elements. What happens is the end link hardware rusts right to the integrated stud and when you go to remove/replace the end links or brackets they are one strong turn and a snap away from needing to be replaced.

Not only did ECS come up with a stronger solution with a superior resistance to corrosion but went the extra mile to incorporate hardware that can be replaced time and time again so you will never need to replace the brackets themselves. The end link brackets feature chamfers to fit perfectly in factory location and make for a straight forward install. The brackets featuring a slotted area for the bolt head to sit so you don't have the headache of having to get a wrench in the tight space behind the bracket while installing them.

Kit Contents:

A pair of front end link brackets
Hardware needed for installation
Part Design:

Billet aluminum brackets
Zinc coated hardware
Superior corrosion resistance
Large upgrade from factory components

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Full set of black anodized billet sway bar end links to replace your flimsy and corroded factory units. Removable hardware for a lifetime serviceable component!

Your factory end link brackets are a one piece design with an integrated stud made of flimsy metal with no coating to protect from the elements. Over the years your end link hardware rusts right to the integrated stud and when you go to remove the end links or brackets they are one strong turn and a snap away from needing to be replaced.

Not only did ECS come up with a stronger solution with a superior resistance to corrosion but went the extra mile to incorporate hardware that can be replaced time and time again so you will never need to replace the brackets themselves. The end link brackets feature chamfers and locator pins to fit perfectly in factory location and make for a straight forward install. The brackets featuring a slotted area for the bolt head to sit so you don't have the headache of having to get a wrench in the tight space behind the bracket while installing them.

Kit Contents:

A set of front and rear end link brackets
Hardware needed for installation
Part Design:

Billet aluminum brackets
Zinc coated hardware
Superior corrosion resistance
Large upgrade from factory components

• Compatibility: Designed for BMW E38 7 Series (1994-2001) and E39 5 Series (1996-2003) models equipped with a 27mm front sway bar.
• Material: Made from high-performance polyurethane, providing superior durability compared to factory rubber bushings. Polyurethane is known for its longevity and resistance to common wear factors such as heat, oil, and road grime.
• Size: Precisely fits sway bars with a 27mm diameter, ensuring a perfect, tight fit for enhanced performance.
• Handling Benefits: By stiffening the sway bar connection to the chassis, these bushings improve body control during cornering, reduce body roll, and deliver more direct and responsive steering feedback. Ideal for drivers seeking better performance and handling stability.
• Long-Lasting Durability: The polyurethane material is more resilient than rubber, resisting the effects of cracking, deformation, and exposure to elements, which means longer service intervals and more consistent performance over time.
• Quiet Operation: Includes special lubrication to prevent noise, ensuring a smooth, quiet ride even under high-stress driving conditions.
• Easy Installation: Direct replacement for OEM bushings, no modifications or specialized tools needed. The upgrade is straightforward and provides an immediate improvement in handling.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

The Powerflex Front Sway Bar Bushing for the BMW E24, E28, E39, and Z3 models, specifically designed for a 14mm sway bar, is a performance-enhancing upgrade that significantly improves the vehicle's handling characteristics. By replacing the stock rubber bushings with high-performance polyurethane, this product provides a range of benefits that enhance both driving experience and suspension performance.

Key Benefits:

1. Enhanced Cornering Stability: The firmer polyurethane material of the bushing reduces unwanted flex in the sway bar, which minimizes body roll during cornering. This results in improved stability and traction, allowing for sharper handling and more confident navigation of curves.

2. Increased Durability: Unlike standard rubber bushings that can deteriorate over time due to environmental factors, Powerflex bushings are designed to resist wear and tear from heat, oil, and road debris. This durability ensures consistent performance and longevity, making them a reliable choice for both daily driving and performance applications.

3. Better Steering Feedback: The stiffer design improves the connection between the sway bar and the chassis, enhancing steering response and feedback. Drivers will experience a more connected feel to the road, leading to better control and an overall more engaging driving experience.

4. Simple Installation Process: Tailored specifically for the E24, E28, E39, and Z3 with a 14mm sway bar, these bushings are a direct replacement for the original components. The installation is straightforward, requiring no modifications, which makes it an easy upgrade for both DIY mechanics and professionals.

5. Versatile Performance: Whether for everyday use, spirited driving, or track applications, these bushings help optimize the vehicle's suspension setup. They improve overall handling dynamics and enhance tire contact with the road, resulting in a more responsive and stable driving experience.

This upgrade is perfect for BMW E24, E28, E39, and Z3 owners looking to enhance their vehicle's suspension performance. The Powerflex Front Sway Bar Bushing for the 14mm sway bar provides a solid solution for improving handling, stability, and overall driving enjoyment, making it an excellent choice for automotive enthusiasts seeking to elevate their driving experience.

 Powerflex Front Sway Bar Bushing (24mm) designed for the BMW E38 7 Series and E39 5 Series:

• Application: Specifically engineered to fit the front sway bar (24mm diameter) on BMW E38 (1994-2001) 7 Series and E39 (1996-2003) 5 Series.
• Construction: Manufactured from high-grade polyurethane, which is more resilient than standard rubber. This ensures longer durability and improved performance.
• Performance: These bushings significantly reduce body roll by increasing the stiffness of the sway bar, enhancing cornering stability, and providing a more direct and responsive feel during turns.
• Durability: Polyurethane bushings are resistant to cracking, warping, and deterioration caused by exposure to harsh elements such as oil, salt, and road debris.
• Size and Fitment: Tailored for 24mm front sway bars, ensuring a snug fit and easy installation as a direct replacement for factory bushings.
• Maintenance: Powerflex bushings come with a grease pack, reducing friction and squeaking noises for a quiet ride.
• Upgrade: Ideal for those seeking to improve the handling characteristics of their BMW without overly compromising ride comfort. Provides enhanced control for both daily driving and spirited performance driving.

These bushings are perfect for those wanting to upgrade their suspension setup for better handling and longevity.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Upgrade your BMW's suspension with BMW E8X E9X Replacement Bushings.

Engineered for durability and performance, these bushings provide improved handling and responsiveness. Specifically designed for BMW E8X and E9X models, they ensure a precise fit and reliable performance. Reduce vibrations and enhance driving comfort with these high-quality replacement bushings.

• Improved handling and responsiveness
• Specifically designed for BMW E8X and E9X models
• Precise fit for reliable performance
• Reduces vibrations for enhanced driving comfort
• High-quality construction for durability