Transmission Cooler

CSF Performance DCT Transmission Cooler - F8x M3/M4

2X Entries For Our G87 M2 Sweepstakes!

T#:401085

Part#: 8081

In Stock

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Featuring a dual-core design that provides a 67% increase in cooling rows for greater cooling efficiency, the CSF Performance DCT Transmission Cooler is the ultimate plug-n-play transmission cooler. This radiator utilizes a single row, high pressure, 26mm multi channel microtube and fits the stock location, giving you a 30% increase in cooling efficiency with an easy and simple installation.

Show More Show Less

CSF Race-spec DCT/6speed Transmission Oil Cooler - E9x M3 S65, E9X 33...

2X Entries For Our G87 M2 Sweepstakes!

T#:384660

Part#: 8042

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

CSF is one of the premier cooling product specialists available on the market today. One item that is often overlooked is the oil cooler. Luckily CSF has taken up the task of upgrading the oil cooler as well. If the oil runs too hot, it can lead to a reduction in wear protection and damage to the head, block, or the turbo system. This unit features a dual-pass design with 20% more surface area and 30% greater efficiency than stock, but still fits in the stock location without any issues. Alternative to OE # 17227521376 Fits the following BMW: 2006-2013 E9X BMW M3 335 2009-2015 E84 BMW X1 35iX

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - 335 W/Thermostat ...

T#:21045476

Part#: BMS-335-TC-WTH

Back Ordered

$ 573.00 USD

Add to Wish List

Qty

$ 573.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - E9X 335

T#:1347205

Part#: N54N55TRANSCOOL

In Stock

$ 444.99

This product was last offered at the strikethrough price on
06-16-2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2006-2011 E90 Sedan 335i/335ix 2006-2013 E90 E91 Sedan/Touring 335d (M57 diesel) 2006-2011 E91 Touring 335i/335ix 2011-2013 E92 Coupe 335is 2007-2013 E92 Coupe 335i/335ix 2006-2013 E93 Convertible 335i/335ix Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

BMW S58 G8X High Performance Automatic Transmission Oil Cooler ...

2X Entries For Our G87 M2 Sweepstakes!

T#:13233495

Part#: 8221

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Introducing the High-Performance Automatic Transmission Oil Cooler for your G80 M3 or G82/83 M4 from CSF! The folks at CSF have created a full suite of cooling products for the G8X chassis. If you are looking to push your BMW to the limits, look no further.

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - E82/88 135

T#:19461751

Part#: BMSTRANSCOOLER

Special Order: No Guaranteed ETA

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

BMS Transmission Oil Cooler - BMW F-Chassis Gen 1 Oil Cooler ...

T#:14915970

Part#: FG1B58TOC

Back Ordered

7% off MSRP $ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD

Add to Wish List

Qty

7% off MSRP

$ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD

Add to Wish List

Everyone knows that high heat is the enemy of your automatic transmission. And that higher power levels generate more transmission fluid heat which will cause a trans slip. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity B58 Gen1 Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity front-mounted air to trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs within the front bumper behind the driver-side kidney grills providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW B58 Gen1 F chassis automatic car running larger than factory turbos. 165ºF (74ºC) transmission oil cooler Improved Racing thermostat included The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity included: (1) High capacity transmission oil cooler (2) Brackets (1) Billet adapter (2) Coolant plugs (1) Improved Racing 165F Thermostat + fittings (4)-10 AN crimped PTFE/SS/Nylon covered lines (6) M6x1.0x12mm bolts, washers and nuts (1) M6x1.0x20mm bolt Compatible with both RHD and LHD, RWD and AWD, ZF8HP50 and ZF8HP70 Transmissions.

Show More Show Less

Automatic Transmission Thermostat Kit

T#:56254893

Part#: 17111437362KT2

In Stock

$ 75.13 USD

Add to Wish List

Qty

$ 75.13 USD

Add to Wish List

We built this Turner Motorsport Cooling Overhaul Kit to hit the key failure points around your automatic transmission heat exchanger and expansion tank mounting setup without breaking the bank.

N54/N55 BMW Automatic Transmission Cooler - 135 W/Thermostat ...

T#:21045475

Part#: BMS-135-TC-WTH

Ships on Sep 1, 2026

$ 573.00 USD

Add to Wish List

Qty

$ 573.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

CSF High-Performance Heat Exchanger & Transmission Cooler Module - F9...

2X Entries For Our G87 M2 Sweepstakes!

T#:38229113

Part#: 8331

Ships in 3 Business Days

$ 1,289.00 USD

Add to Wish List

Qty

$ 1,289.00 USD

Add to Wish List

The F97 X3M and F98 X4M are powered by the same high-performance S58 engine found in the G8X M3, M4, and M2. While these SUVs deliver impressive power and speed, they also suffer from the same heat management challenges as their sedan and coupe counterparts. That’s where CSF’s advanced cooling solutions come in—becoming essential upgrades for S58 owners, even for those keeping their engines mostly stock. After over a year of development and testing, CSF is proud to introduce the Front Mount Heat Exchanger & Transmission Cooler Module for the F9X X3M and X4M. One of the biggest challenges in developing a Front Mount Heat Exchanger for these models was limited space. Unlike the G8X models, the X3M and X4M feature a different transmission oil cooler, restricting the available room for a larger heat exchanger due to the mounting cradle. After extensive testing with smaller core designs, CSF determined that integrating the Heat Exchanger with a Transmission Cooler Upgrade was the optimal solution for maximizing both size and performance. By combining both components into a single cooling module, CSF achieved a design that accommodates the same core size as the G8X Heat Exchanger. The integrated Auto Transmission Cooler utilizes the same dual-core design as the G8X Transmission Cooler and is seamlessly fitted to the new Heat Exchanger. This innovative all-in-one module not only addresses two major cooling issues for the X3M and X4M but also reduces overall costs—savings that are passed along to the customer. Compared to the stock heat exchanger, CSF’s upgraded design offers significant improvements. The TIG-welded aluminum tanks are much larger than the OE plastic tanks, providing superior strength and fluid volume. A 2-row 42mm core increases cooling efficiency and capacity, utilizing CSF’s Exclusive B-Tube Technology to enhance airflow and heat dissipation. Multi-louvered fins further expand the heat exchange surface area, improving overall cooling performance while maintaining proper airflow. Built entirely from high-strength aluminum, this system ensures maximum durability and reliability. The mounting tabs and brackets are significantly stronger than the factory plastic components, offering improved longevity. Additionally, the heat exchanger includes an integrated bolt-on metal rock guard, which is far more robust than the stock plastic version—providing better protection against road debris and ensuring greater confidence in the system’s resilience. CSF’s Transmission Cooler features an innovative dual-pass design that dramatically enhances cooling performance. Unlike the OEM single-core cooler, CSF’s front-to-back stacked core design more than doubles the surface area and nearly triples the core volume. Engineers leveraged the extra space freed up by replacing the OE cooler and oversized plastic cradle, effectively doubling cooling capacity while maintaining a perfect OEM fit—no modifications required. By switching from a single-core to a dual-core design, CSF achieved a 201% increase in overall volume, significantly improving heat dissipation and fluid capacity. Using CSF’s AC Condenser Technology, the cooler incorporates a high-pressure 1-row 16mm 9-channel microtube design, optimizing oil flow and maximizing surface area contact. These features work together to provide the most effective heat dissipation possible, keeping transmission temperatures under control even under extreme conditions. With CSF’s new Front Mount Heat Exchanger & Transmission Cooler Module, X3M and X4M owners can enjoy superior cooling efficiency, enhanced durability, and long-term performance—all in a cost-effective, OEM-fit package.

Show More Show Less

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 3 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less

Transmission Oil Cooler Regulator Valve

T#:302929

Part#: 17211437772-987

Ships on Dec 24, 2026

Sale - Save 4% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.52 USD

Add to Wish List

Qty

Sale - Save 4%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.52 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

CSF Performance DCT Transmission Cooler - F8x M3/M4

CSF Race-spec DCT/6speed Transmission Oil Cooler - E9x M3 S65, E9X 33...

N54/N55 BMW Automatic Transmission Cooler - 335 W/Thermostat ...

N54/N55 BMW Automatic Transmission Cooler - E9X 335

BMW S58 G8X High Performance Automatic Transmission Oil Cooler ...

N54/N55 BMW Automatic Transmission Cooler - E82/88 135

BMS Transmission Oil Cooler - BMW F-Chassis Gen 1 Oil Cooler ...

Automatic Transmission Thermostat Kit

N54/N55 BMW Automatic Transmission Cooler - 135 W/Thermostat ...

CSF High-Performance Heat Exchanger & Transmission Cooler Module - F9...

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Transmission Oil Cooler Regulator Valve

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results