• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

ECS Titanium Wheel Bolts

Upgrade your BMW's performance with ECS Titanium Wheel Bolts, designed for weight savings and durability. These premium bolts are perfect for performance enthusiasts seeking high-quality components that won't rust. Crafted from annealed titanium alloy, they offer a significant weight reduction of 50% compared to steel bolts of the same size, reducing rotational mass for improved performance.

Benefits:

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for exceptional strength and durability
• Tested to class 10.9 fastener proof load requirements without signs of fatigue or failure
• Rust-resistant construction ensures long-lasting performance
• Compatible with BMW and other vehicles with 14mm diameter, 1.25mm thread pitch, and 17mm head size

Upgrade your BMW's wheel bolts to ECS Titanium Wheel Bolts for improved performance and durability. These bolts are designed for performance enthusiasts looking to save weight and maintain high quality. With a 50% reduction in weight compared to steel bolts, they reduce rotational mass on your vehicle. CNC'd from annealed titanium alloy, they undergo rigorous testing to ensure durability and resistance to fatigue or failure. Before installation, ensure thorough cleaning of hub threads to prevent any issues.

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for durability
• Tested to class 10.9 fastener proof load requirements
• Compatible with wheel spacers for proper fitment

ECS Tuning Wheel Lock Sets for BMW

Protect your BMW's wheels from theft with ECS Tuning Wheel Lock Sets. These locks offer added security and peace of mind, preventing unauthorized removal of your valuable wheels. With easy installation and a special socket tool included, you can safeguard your investment without costly alterations.

Benefits:

• Enhanced security for your expensive wheels
• Easy installation without the need for costly alterations
• Special socket tool included for convenient removal
• Designed to work with most aftermarket wheels

ECS Tuning's conical seat wheel bolts adhere to some of the most stringent testing and safety standards, and also feature a corrosion resistant black zinc coating for longevity and a change of style. The conical seat of the bolt was designed for compatibility with most aftermarket and OE MINI wheels, to ensure your wheels are safely secured. Make sure your wheels are fastened correctly with Black Conical Seat Wheel Bolts from ECS Tuning.

• Compliant with stringent testing and safety standards
• Corrosion-resistant black zinc coating for longevity and style
• Compatible with most aftermarket and OE MINI wheels
• Set of 20 bolts for replacing factory wheel bolts

Stock size for MINI, great for replacing all the wheel bolts with new for a clean look.

This is a set of 20 to replace your factory wheel bolts to black zinc coated. 14x1.25x27mm

Bolt specifications:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 27mm

Upgrade the security of your BMW wheels with the BMW Conical Seat Locking Wheel Bolt Kit. This kit provides enhanced protection against wheel theft while adding a stylish touch to your vehicle. Engineered specifically for BMW models, these locking wheel bolts offer a precise fit and reliable performance. Ensure peace of mind and safeguard your investment with this premium locking wheel bolt kit.

• Enhanced protection against wheel theft
• Stylish addition to your BMW
• Engineered for precise fit and reliable performance
• Safeguards your investment

Elevate your BMW's security with the BMW Conical Seat Locking Wheel Bolt Kit. This comprehensive kit provides peace of mind by securing your wheels against theft. Engineered specifically for BMW vehicles, these locking wheel bolts offer a precise fit and reliable performance. Say goodbye to worries about wheel theft and enjoy enhanced protection for your BMW with this essential locking bolt kit.

• Enhances security for BMW wheels
• Precision engineered for a perfect fit
• Provides peace of mind against wheel theft
• Specifically designed for BMW vehicles

Upgrade Your Mini's Wheel Replacement Process with Stud Conversion Kit

Optimize the wheel changing process for your Mini with this stud conversion kit, designed to streamline wheel replacements efficiently. The kit comprises 16 Conical Seat Lug Nuts and 16 75mm Wheel Studs (threaded 62mm), ensuring permanent wheel hangers for quick and effortless wheel changes. Utilizing the provided studs significantly reduces time and hassle during wheel replacements.

Key Benefits:

• Facilitates faster and easier wheel changes
• Provides permanent wheel hangers for convenience
• Wheel studs accommodate various spacer widths
• Reduces wear on wheel hubs for enhanced durability
• Simplifies tire changing/removal process

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm.

Safeguard your valuable BMW wheels from potential theft using ECS Tuning Wheel Lock sets, providing additional peace of mind without necessitating expensive alterations. These wheel locks, replacing one wheel bolt, come equipped with a special socket tool for straightforward removal, ensuring the security of your prized wheels.

• Safeguards expensive wheels from theft
• No need for costly alterations
• Each set includes a special socket tool for easy removal
• Factory bolt length (28mm) with conical seat design for compatibility with most aftermarket wheels
• Caution: Avoid overtightening or using air tools
• Lock keys designed for a specific bolt orientation

Upgrade the wheel hardware of your BMW or MINI with the Titanium Conical Seat Lug Nut Set - Open Ended - 20 Pieces. This set of lug nuts offers a lightweight and high-strength alternative to traditional steel lug nuts, enhancing both performance and aesthetics. Engineered with precision, these lug nuts provide a secure fit and reliable performance. Elevate the look and feel of your BMW or MINI with this premium titanium lug nut set.

• Lightweight and high-strength titanium construction
• Enhances both performance and aesthetics
• Engineered with precision for a secure fit
• Compatible with BMW and MINI models

ECS Tuning Wheel Lock Sets

ECS Tuning presents a solution to ensure the security of your valuable wheels with Wheel Lock sets. These sets offer protection without the need for costly modifications. The wheel locks replace one of your wheel bolts and come with a special socket tool for effortless removal, included in each kit. With a factory bolt length of 28mm and a conical seat design, they are compatible with most aftermarket wheels.

Product Details:

• Protect your valuable wheels from theft
• No need for expensive alterations
• Factory bolt length: 28mm
• Conical seat design for compatibility with most aftermarket wheels
• Special socket tool included for easy removal
• Unique wheel lock key provided in each set (outer diameter: 26mm)

Kindly note that these bolts are not compatible with any wheel bolt cap and that the lock keys are designed to fit the bolts in only one specific orientation.

For performance-driven enthusiasts seeking lightweight and high-quality wheel bolts, ECS Titanium Wheel Bolts are the ideal choice. These bolts are 50% lighter than steel equivalents, reducing rotational mass on the vehicle. Precision CNC'd from annealed titanium alloy, these bolts meet class 10.9 fastener proof load requirements without signs of fatigue or failure.

Benefits:

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for superior strength
• Full set of 20 for comprehensive wheel bolt replacement
• Diameter: 14mm, Thread Pitch: 1.25mm, Length: 27mm, Head: 17mm, Seat: Conical Seat
• Ensure thorough cleaning of hub threads before installation to prevent potential fatigue or cracking due to leftover zinc from previous bolts
• Note: When using wheel spacers, calculate the required bolt length by adding spacer size to OE bolt length for proper fitment (e.g., 26mm OE Wheel Bolt + 15mm Wheel Spacer = 41mm Length Bolt)