BMW Drive Belts & V-Belts

OEM Accessory Belt Service Kit - F3X F22/23 N55 3.0L

T#:587391

Part#: 11287628661ABKT

In Stock

$ 171.99

This product was last offered at the strikethrough price on
06-09-2026

$ 153.99 USD

Add to Wish List

Qty

$ 153.99 USD

Add to Wish List

This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.

E9X M3 Performance Underdrive Pulley Kit

T#:593749

Part#: 10.00.011

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N55 F-Chas...

T#:22097553

Part#: 11287628661TKT

In Stock

Sale - Save 23% $ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD

Add to Wish List

Qty

Sale - Save 23%

$ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - N54 3.0L

T#:554448

Part#: N54ACCKT

In Stock

Sale - Save 15% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 169.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 169.24 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

OEM Accessory Belt Service Kit - F3X F10 N20 2.0L

T#:587390

Part#: 11287594969ABKT

In Stock

Sale - Save 29% $ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD

Add to Wish List

Qty

Sale - Save 29%

$ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD

Add to Wish List

This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.

OEM Accessory Belt Service Kit - E82/88 E9X N55

T#:567679

Part#: 11287582946KT4

Ships in 1 Business Day

Sale - Save 4% $ 212.99

This product was last offered at the strikethrough price on
03-19-2026

$ 204.87 USD

Add to Wish List

Qty

Sale - Save 4%

$ 212.99

This product was last offered at the strikethrough price on
03-19-2026

$ 204.87 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E82/88 E9X...

T#:22163422

Part#: 11287568247TKT

Ships on Sep 10, 2026

Sale - Save 15% $ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - N52 3.0L

T#:593693

Part#: N52ABKT

In Stock

Sale - Save 22% $ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD

Add to Wish List

Qty

Sale - Save 22%

$ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

VAC Motorsports ATI A/C Pulley - BMW M50 M52 M52TU M54 S50 S52 ...

T#:8076765

Part#: VAC-HPCD-M50-ACP

In Stock

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

If you are planning on keeping your Air Conditioning system in your street or track car, then you will need to combine VAC's ATI AC Pulley with the ATI Harmonic Damper.

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N52 ...

T#:22130432

Part#: 11287530314TKT

Back Ordered

Sale - Save 18% $ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD

Add to Wish List

Qty

Sale - Save 18%

$ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F3X F10 N20 2....

T#:22097555

Part#: 11287618848TKT

In Stock

Sale - Save 34% $ 106.99

This product was last offered at the strikethrough price on
06-01-2026

$ 70.48 USD

Add to Wish List

Qty

Sale - Save 34%

$ 106.99

This product was last offered at the strikethrough price on
06-01-2026

$ 70.48 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt and an OEM tensioner assembly. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the tensioner and upgrading your accessory belt is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

N54 AC Delete Accessory Belt Kit - BMW N54 3.0L

T#:26771665

Part#: 7PK1660KT

In Stock

Sale - Save 13% $ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.28 USD

Add to Wish List

Qty

Sale - Save 13%

$ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.28 USD

Add to Wish List

This AC Delete Accessory Belt Kit includes a new idler pulley and a shorter ECS Kevlar belt for deleting your AC compressor. ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432

Show More Show Less

OEM Accessory Belt Service Kit - E30 M20

T#:554430

Part#: 64521706826KT1

In Stock

$ 201.62

This product was last offered at the strikethrough price on
05-26-2026

$ 194.08 USD

Add to Wish List

Qty

$ 194.08 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
1984-1991 E30 BWM 325, 325i/is/ix, 325e/es

Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

VAC Harmonic SuperDamper By ATI - M52/S52/M52TU/M54

T#:27905092

Part#: VAC-HPCD-M50

Ships in 7 Business Days

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

If you're grappling with issues like crankshaft failures and oil pump breakdowns in your BMW 6-cylinder engines, you're not alone. Even seasoned mechanics can overlook the critical aspect of harmonic resonance control in these inline-6 motors, despite their optimal configuration.

Enter ATI Performance Products in collaboration with VAC Motorsports, presenting a solution in the form of new dampers tailored for BMW 2.5L, 2.8L, 3.0L, and 3.2L straight-6 engines found in various models like the E36 and E46 M3, E9X, and E6X, as well as newer Z3s and Z4s. These dampers effectively nullify crankshaft harmonic vibrations, paving the way for enhanced horsepower and torque output, alongside a reduction in internal engine wear. Say goodbye to issues like fractured oil pumps and timing chain mishaps! By pairing these dampers with a VAC accessory pulley, you seamlessly replace the OEM balancer. Featuring a 7” outer diameter and OEM-style timing alignment tabs, these ATI Super Dampers boast SFI 18.1 Safety Certification, ensuring they're competition-ready.

What sets the ATI SuperDamper apart? It's the remedy for vibration woes in inline 6 engines, especially those equipped with lightweight clutch and flywheel setups. Expect diminished wear on bearings, engine accessories, and oil pumps, all while being compatible with underdrive pulleys.

Included in the kit are the damper itself, a lightweight VAC Billet Crankshaft Pulley, along with all necessary mounting and installation hardware. Note that it's not compatible with S50B30 & S50B32 Euro Engines. For street/track vehicles with air conditioning, opting for the Additional A/C Pulley Option is imperative, given that the OE A/C pulley isn't compatible. Rest assured, all required mounting and installation hardware is included, and the entire package is proudly Made in the USA.

Show More Show Less

Accessory Belt Service Kit - E39 E46 M54 (2002+)

T#:401685

Part#: 11287512762KT3

In Stock

Sale - Save 3% $ 228.99

This product was last offered at the strikethrough price on
06-23-2026

$ 222.24 USD

Add to Wish List

Qty

Sale - Save 3%

$ 228.99

This product was last offered at the strikethrough price on
06-23-2026

$ 222.24 USD

Add to Wish List

This kit covers many of the common wear items that should be changed any time the serpentine belt is being replaced. As these cars gain years and mileage the belt tensioners will also need to be replaced along with the actual belts. It won't do any good to replace the belt if the tensioners are worn. This kit will save you time and money over buying these pieces individually. This kit includes an updated hydraulic alternator tensioner for added reliability and longevity.

Show More Show Less

OEM Accessory Belt Service Kit - F10 F12 F13 F15 F16 F01 F02 ...

T#:554454

Part#: N55BMWKT

Ships in 1 Business Day

Sale - Save 8% $ 200.99

This product was last offered at the strikethrough price on
06-09-2026

$ 185.68 USD

Add to Wish List

Qty

Sale - Save 8%

$ 200.99

This product was last offered at the strikethrough price on
06-09-2026

$ 185.68 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

For vehicles with dynamic or adaptive drive

Fits the following BMWs:
F01/02 BMW 740i/Li/Li xDrive
F10 BMW 535i/i xDrive
F12/3 BMW 640i/i xDrive
F15 BMW X5 s/xDrive35i
F16 BMW X6 s/xDrive35i

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F8X S55 ...

T#:22163426

Part#: 11287848605TKT

Ships in 1-3 days

$ 414.99

This product was last offered at the strikethrough price on
08-07-2026

$ 380.99 USD

Add to Wish List

Qty

$ 380.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

S14 VAC/ATI Crank Damper - BMW S14B23/B25/B27

T#:12610319

Part#: VAC-HPCD-S14

Ships in 6 Business Days

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

NOTE: Due to space limitations, the design of this damper will overdrive your components (water pump, power steering, and alternator) by approximately 10-13%; we highly recommend using underdrive pulleys in your setup Controlling the harmonic resonance of the BMW S14 engine is highly important as RPMs rise, but the ideal configuration of the 4-cylinder motor makes even the most experienced engine builders overlook some fundamental principles of engine harmonics that can be destructive. Harmonics destroy these motors by causing extensive oil pump and crankshaft damage, but the addition of VAC’s Harmonic Damper eliminates the unstable crankshaft harmonic vibrations that cause internal engine wear. By eliminating harmonic vibrations, your S14 engine will be able to produce more horsepower and torque with increased reliability. The VAC/ATI Harmonic Damper is made with an integral pulley, eliminating the need for the additional pulley other models require. Exceeds SFI 18.1 Safety Certification Eliminates problems with lightweight clutch and flywheel assemblies Controls destructive harmonic forces Reduces instances of bearing wear, accessory failure and oil pump failure Includes lightweight VAC Billet Crankshaft Pulley Made in USA ATI Performance Products, Inc. is located in Baltimore, MD, and specializes in producing and maintaining high performance products for street and track applications. Over the years ATI has earned a reputation for its cutting edge technology, attention to detail and rigorous testing under race conditions.

Show More Show Less

N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0...

T#:1241396

Part#: TMSN54BPKT

Back Ordered

Sale - Save 5% $ 541.99

This product was last offered at the strikethrough price on
05-03-2026

$ 512.27 USD

Add to Wish List

Qty

Sale - Save 5%

$ 541.99

This product was last offered at the strikethrough price on
05-03-2026

$ 512.27 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924

Show More Show Less

Performance Accessory Belt Kit - Kevlar Reinforced - BMW B46TU/B48TU...

T#:29798952

Part#: 11288650740T1KT

Ships on Nov 12, 2026

Sale - Save 24% $ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Qty

Sale - Save 24%

$ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: ECS Tuning Kevlar Reinforced Performance Accessory Belt - Designed to resist OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F22/23 F3X B58...

T#:22097533

Part#: 11288613707TKT

Ships on Nov 12, 2026

Sale - Save 24% $ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Qty

Sale - Save 24%

$ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and the hardware required to install the new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E82/88 E9X...

T#:22163417

Part#: 11287582946TKT

Ships in 1 Business Day

$ 221.92 USD

Add to Wish List

Qty

$ 221.92 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, belt tensioner, and idler pullies. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

S54 Turner Motorsport Ultimate Power Pulley And Drive Belt Overhaul S...

T#:15710772

Part#: 11281730349-KT

Back Ordered

Sale - Save 1% $ 499.99

This product was last offered at the strikethrough price on
05-03-2026

$ 494.69 USD

Add to Wish List

Qty

Sale - Save 1%

$ 499.99

This product was last offered at the strikethrough price on
05-03-2026

$ 494.69 USD

Add to Wish List

The idea of power pulleys is simple. The less effort the engine puts into running accessories such as the water pump, power steering, pump alternator etc., the more of that power can be used elsewhere - your wheels! The way this is done by reducing the rotation of the pulleys by as much as 10-20%! The end result is more horsepower at your disposal. Turner has done extensive testing (on and off the track), to ensure that the accessory systems still function as intended and without failure. These pulleys offer an excellent compromise of power gains, reliability and performance. All Turner pulleys are constructed of high quality T-6061 aluminum for durability and longevity. They are also finished in a black hard anodizing, which is highly resistant to wear including chemical and heat exposure. They have been designed to carry stock-like aesthetics, but with increased strength properties and lighter weight. Because of the durable aluminum construction, you can also put the worries of a serious plastic failure to rest. These pulleys will last, all the while increasing horsepower too! While you're installing your Power Pulley Kit, it makes sense to overhaul your Accessory Belt System as well, so this kit includes our Accessory Belt Kit as well.

Show More Show Less

OEM Accessory Belt Service Kit - E9X M3 S65

T#:391554

Part#: 11287837898

Ships in 1 day

Starting at $ 964.99 USD

Add to Wish List

Starting at $ 964.99 USD

Add to Wish List

This comprehensive kit includes both belts, belt tensioners, upper and lower deflection pulleys, and the adjusting pulley. Select from all Genuine BMW parts or a combination of OEM/OE BMW parts. Staying on top of your belt maintenance is the smart move. Cracked or worn belts are a recipe for a headache or worse. The main drive belt runs critical components - the alternator, water pump, and power steering pump. The pulleys contain bearings that may be worn when it comes time to replace the belts. You can check the pulleys by relieving tension on the belt and feeling each pulley for play or grinding. The tensioner also sees similar wear. If your pulleys are new or don't need replacement, you can pick up the belts on their own.

Show More Show Less

OEM Accessory Belt Service Kit - B46/48 B58

T#:587399

Part#: 112886137071ABKT

Back Ordered

Sale - Save 19% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD

Add to Wish List

Qty

Sale - Save 19%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

VAC Motorsports Lightweight Underdrive Power Pulley Set - S54 ...

T#:27705420

Part#: VACUPPSS542ULG

Ships on Aug 28, 2026

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Crafted from high-grade domestic USA 6061-T6 Billet Aluminum, these pulleys are a testament to precision engineering. Rigorously tested through extensive hours of racing and street use, they've proven their reliability and performance excellence.

Each pulley is meticulously zero-balanced and thoroughly inspected to ensure zero-runout, guaranteeing optimal performance without compromising on reliability, noise, or vibration.

This comprehensive kit comprises a precision power steering pulley, water pump pulley, and an OE Contitech Brand drive belt. Experience a notable boost of 8hp and 7 ft/lbs. of torque to the wheels, making it ideal for stock vehicles, track cars, and even those with upgraded audio systems seeking consistent voltage output from their alternators.

Show More Show Less

OEM Accessory Belt Service Kit - E39, E46 M54 (up to 2002)

T#:401686

Part#: 11281748131KT2

In Stock

Sale - Save 3% $ 272.99

This product was last offered at the strikethrough price on
06-23-2026

$ 265.58 USD

Add to Wish List

Qty

Sale - Save 3%

$ 272.99

This product was last offered at the strikethrough price on
06-23-2026

$ 265.58 USD

Add to Wish List

This kit covers many of the common wear items that should be changed any time the serpentine belt is being replaced. As these cars gain years and mileage the belt tensioners will also need to be replaced along with the actual belts. It won't do any good to replace the belt if the tensioners are worn. This kit will save you time and money over buying these pieces individually. This kit includes an updated hydraulic alternator tensioner for added reliability and longevity.

Show More Show Less

Hydraulic Alternator Belt Tensioner Conversion Kit

T#:15710833

Part#: 11287838797-KT

Ships Today

Sale - Save 1% $ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.64 USD

Add to Wish List

Qty

Sale - Save 1%

$ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.64 USD

Add to Wish List

The original mechanical design is has been discontinued by BMW. So now Turner offers this complete hydraulic tensioner conversion kit for your BMW alternator/water pump/power steering belt. Changes the old style mechanical design to the updated hydraulic design recommended by BMW. Includes the following parts Hydraulic Tensioner Adjusting Pulley Caps & Dust Guards Securing Hardware

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E36 Z3 M52 S52...

T#:22130428

Part#: 11281437929TKT

Ships in 1 Business Day

Sale - Save 8% $ 264.99

This product was last offered at the strikethrough price on
05-03-2026

$ 244.54 USD

Add to Wish List

Qty

Sale - Save 8%

$ 264.99

This product was last offered at the strikethrough price on
05-03-2026

$ 244.54 USD

Add to Wish List

Eliminate your squeaking accessory belt pulleys and cracked drive belts with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, an OEM A/C belt, belt tensioners, an idler pulley, and the hardware required for installation ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the belts, rollers, and tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

ALTA Crank Pulley - 0% (Stock Size) MINI W11 1.6L Engine

T#:394899

Part#: AMPENG500

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

ALTA Lightweight Crank Pulley (LCP) for Mini

Upgrade your Mini's performance with the ALTA Lightweight Crank Pulley (LCP), designed to increase horsepower and torque. Available in two sizes - 0% Stock Sized and +2% Oversized - this pulley is engineered for Supercharged Cooper S models. Crafted from 6061T6 aluminum, the ALTA pulley is lightweight, weighing just 0.65 lbs, providing a weight reduction of over 2.3 lbs compared to the stock crank pulley.

Increases horsepower and torque
Lightweight design reduces rotational mass
Does not wear out engine bearings or oil pump
Adds boost safely and reliably
Improves belt contact with pulleys, reducing wear

Show More Show Less

ALTA Crank Pulley - 2% - R52 R53

T#:26238480

Part#: AMPENG520

In Stock at Vendor

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Enhance the performance of your Mini with the ALTA Lightened Crank Pulley (LCP), engineered to increase horsepower and torque. Available in 0% Stock Sized and +2% Oversized options, this pulley is crafted from 6061T6 aluminum, weighing only 0.65 lbs. Significantly lighter than the stock crank pulley, the ALTA LCP ensures improved engine efficiency without adding vibration or noise. The +2% Oversized pulley provides additional boost for Supercharged Cooper S models, delivering safe and reliable performance. With increased belt contact, this pulley reduces wear and enhances durability, making it a must-have upgrade for Mini enthusiasts.

Increases horsepower and torque
Lightweight 6061T6 aluminum construction
Available in 0% Stock Sized and +2% Oversized options
Does not affect charging system
Improves engine efficiency and performance

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N55 3.0...

T#:1241397

Part#: TMSE90N55BPKT

Ships in 1 Business Day

$ 601.55 USD

Add to Wish List

Qty

$ 601.55 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Show More Show Less

OEM Accessory Belt Service Kit - E46 E39 E53 M54 (Pre-09/2002) ...

T#:554446

Part#: M54ACCKT2

In Stock

Sale - Save 3% $ 256.99

This product was last offered at the strikethrough price on
06-23-2026

$ 249.51 USD

Add to Wish List

Qty

Sale - Save 3%

$ 256.99

This product was last offered at the strikethrough price on
06-23-2026

$ 249.51 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
2000-09/2002 E53 BMW X5 M54
2000-09/2002 E39 BMW M54
1999-09/2002 E46 BMW M54

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E60 N54 3....

T#:22163416

Part#: 4485241TKT

In Stock

Sale - Save 23% $ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.47 USD

Add to Wish List

Qty

Sale - Save 23%

$ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.47 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, belt tensioner, and idler pullies. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - E36 328 M3, Z3 2.8 M Coupe/Roadster ...

T#:593717

Part#: M52ABSKT

Ships in 1 Business Day

$ 236.99

This product was last offered at the strikethrough price on
06-17-2026

$ 234.99 USD

Add to Wish List

Qty

$ 234.99 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

S55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F8X S55 3.0L ...

T#:1241399

Part#: TMSS55BPKT

Ships on Oct 26, 2026

Sale - Save 6% $ 794.99

This product was last offered at the strikethrough price on
07-07-2026

$ 744.78 USD

Add to Wish List

Qty

Sale - Save 6%

$ 794.99

This product was last offered at the strikethrough price on
07-07-2026

$ 744.78 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#585961 and T#599784!

Show More Show Less

Accessory Belt Kit

T#:15744006

Part#: 11281469266KT-KT

Ships in 1 Business Day

Sale - Save 4% $ 236.99

This product was last offered at the strikethrough price on
06-16-2026

$ 228.39 USD

Add to Wish List

Qty

Sale - Save 4%

$ 236.99

This product was last offered at the strikethrough price on
06-16-2026

$ 228.39 USD

Add to Wish List

Having your accessory belt fail is definitely inconvenient, and can leave you on the side of the road if the alternator isn't charging. Over time the tensioner and the belt itself gets worn and will eventually fail. Turner Motorsport has assembled a convenient kit with this in mind. This kit includes everything you need to service the belt drive system and keep everything in check. This kit includes: Continental accessory belts Ruville A/C belt tensioner URO idler and belt tensioner pulleys LUK hydraulic tensioner assembly Idler pulley securing bolt

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F22/23 F3X N55 3.0...

T#:1241398

Part#: TMSF30N55BPKT

In Stock

Sale - Save 4% $ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 498.55 USD

Add to Wish List

Qty

Sale - Save 4%

$ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 498.55 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate ECS Kevlar reinforced accessory belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Show More Show Less

Water Pump/Alternator Accessory Belt Service Kit w/ Kevlar Reinforced...

T#:22097556

Part#: 6PK1548TKT

Ships on Aug 28, 2026

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Accessory Belt, tensioner assembly, and your idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F07/10 F06/12/...

T#:23482929

Part#: 8PK1478TKT

In Stock

Sale - Save 23% $ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Qty

Sale - Save 23%

$ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and new pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - E60 M5, E63 E64 M6 S85

T#:584180

Part#: 11287838226KT4

Ships in 4 Business Days

$ 905.99 USD

Add to Wish List

Qty

$ 905.99 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E46 M3, Z3M, Z...

T#:23482931

Part#: S54KEVACCKT

Back Ordered

Sale - Save 2% $ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.21 USD

Add to Wish List

Qty

Sale - Save 2%

$ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.21 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E90 335d M57 ...

T#:23416570

Part#: 11287792059TKT

In Stock

Sale - Save 3% $ 240.99

This product was last offered at the strikethrough price on
06-01-2026

$ 233.95 USD

Add to Wish List

Qty

Sale - Save 3%

$ 240.99

This product was last offered at the strikethrough price on
06-01-2026

$ 233.95 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Kit - E46 M3

T#:554437

Part#: E46M3ACCKT

Ships in 1 day

$ 352.99 USD

Add to Wish List

Qty

$ 352.99 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
2001-2006 E46 BMW M3

Show More Show Less

OEM Accessory Belt Service Kit - E34 525i M20

T#:589759

Part#: PBTABE34M20KT

Ships in 6 Business Days

$ 142.09 USD

Add to Wish List

Qty

$ 142.09 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

Belt - Main Drive and A/C Belt Set for Turner Pulley Kit - E60 M5, E6...

T#:16580

Part#: E60-M5-UDP-BELTS

Ships in 6 Business Days

Sale - Save 3% $ 49.95

This product was last offered at the strikethrough price on
05-03-2026

$ 48.44 USD

Add to Wish List

Qty

Sale - Save 3%

$ 49.95

This product was last offered at the strikethrough price on
05-03-2026

$ 48.44 USD

Add to Wish List

These are the replacement drive belts used in our Turner Pulley Kit on the S85 V10 engine (E60 M5 and E63/E64 M6). These belts are shorter than the stock belt since our underdrive crank pulley is a larger diameter than stock. Because of the different lengths, you cannot use a stock belt with the Pulley Kit. This set of belts includes the main drive belt (6PK-1400) and the A/C belt (6PK-1045).

This belt set fits the following BMWs with the Turner Pulley Kit:
2006-2010 E60 BMW M5
2004-2011 E63 E64 BMW M6

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N63 S63 ...

T#:23516122

Part#: 11287631824TKT

In Stock

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, replacement A/C belt, and a new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

VAC M62 Underdrive Power Pulley Set (09/1998+)

T#:928436

Part#: VAC-UPPS-M62-99

Ships in 8 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

VAC Underdrive Power Pulley Sets for the M60 release 8.5 horsepower @ 5800 RPM and 8 lb/ft of torque @ 4500 RPM (measured @ the wheels.) Always made using only virgin billet 6061 T6 aluminum, an anodized finish, and the tightest tolerances; VAC's pulleys are used on some of the fastest BMWs on the planet. A lightweight design optimizes performance and response while under-driving components just the right amount for proper function at all RPMs.

Show More Show Less

VAC Underdrive Power Pulley Set - S14

T#:598754

Part#: VAC-UPPS-S14-3-G

Ships on Aug 28, 2026

$ 334.99 USD

Add to Wish List

Qty

$ 334.99 USD

Add to Wish List

Made using only virgin billet aluminum, a hard anodized finish, and the tightest tolerances, VAC's pulley sets are used on some of the fastest S14s on the planet. This lightweight design optimizes performance and response while under-driving components just the right amount for proper function. Perfect for track cars, they can also be used on a street car without any problems. Features: Reduces pump cavitation at higher rpm's Saves weight when every bit counts Includes new, correct length, labeled Contitech belts for WP, ALT, P/S

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

ALTA Lightweight Crank Pulley (LCP) for Mini

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results