BMW Driveshafts

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E36 E46 Z...

T#:4988548

Part#: BMW04A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier - Street Bushings - BMW...

T#:4744858

Part#: BMW01A0-S

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The stock center support bearing carrier is engineered to minimize noise, vibration, and harshness (NVH) in the cabin by loosely securing the center bearing with a soft rubber bushing. However, this design allows the driveshaft to move off-center during launches and shifts, reducing throttle response and causing drivetrain oscillations. Over time, the rubber bushing can sag or dry rot, leading to misalignment of the driveshaft.

Prevent or fix this common problem with JXB Performance's Driveshaft Center Support Bearing Upgrade! This upgrade features a simple yet highly effective 2-piece design that makes installation and bushing replacement effortless. The stock carrier is cut away, and the JXB bushings securely "clamp" the driveshaft bearing in place, ensuring constant driveshaft alignment.

The Street bushing option from JXB is the most popular choice, offering a significant improvement over the stock design while keeping NVH levels minimal.

Note: Some light NVH, such as a soft hum, may occur at certain speeds. However, with a modified exhaust or open windows, it’s unlikely to be noticeable.

Installation is straightforward and doesn’t require removing the driveshaft. The 2-piece design clamps directly onto the OEM bearing, though removing the old carrier will require a cutting tool.

Need replacement or additional bushings? See T#4799658 for replacement street bushings.

Show More Show Less

Flex Disc Replacement Kit - Z3M, Z4M, E36 E46 M3, E34 M5

T#:24212302

Part#: 26112226527TKT

In Stock

Sale - Save 30% $ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD

Add to Wish List

Qty

Sale - Save 30%

$ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD

Add to Wish List

Comes with a flex disc (giubo), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E70/71 F1...

T#:6076533

Part#: BMW12A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E81/82/88...

T#:4744864

Part#: BMW01A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

Driveshaft Overhaul Kit - With Giubo and CSB - E36

For vehicles with manual transmissions only

T#:41222052

Part#: 261175114541FKT

In Stock

Sale - Save 7% $ 194.99

This product was last offered at the strikethrough price on
04-09-2026

$ 182.11 USD

Add to Wish List

Qty

Sale - Save 7%

$ 194.99

This product was last offered at the strikethrough price on
04-09-2026

$ 182.11 USD

Add to Wish List

The smart, performance-driven solution for maintaining your BMW’s legendary balance of power, comfort, and handling.

JXB Driveshaft Center Support Bearing Carrier Upgrade - G20 3-Series,...

T#:6076534

Part#: BMW13A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Carrier Spare Bushing Set - Track

Spare bushings only - does not include new carrier assembly

T#:4799659

Part#: BSH04A1

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

Driveshaft Carrier Spare Bushing Set - Street

Spare bushings only - does not include new carrier assembly

T#:4799658

Part#: BSH04A0

Ships in 4 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

Driveshaft Service Kit - E46 M3 - Aftermarket

T#:41863696

Part#: 26122282495T1KT

Ships in 3 Business Days

Sale - Save 16% $ 378.99

This product was last offered at the strikethrough price on
04-17-2026

$ 316.50 USD

Add to Wish List

Qty

Sale - Save 16%

$ 378.99

This product was last offered at the strikethrough price on
04-17-2026

$ 316.50 USD

Add to Wish List

This kit has a quality aftermarket center mount, flex disk and required hardware for a fresh driveshaft overhaul!

Driveshaft Overhaul Kit - With Giubo and CSB

T#:15710816

Part#: 26121226731-KT

In Stock

Sale - Save 24% $ 289.99

This product was last offered at the strikethrough price on
04-16-2026

$ 219.12 USD

Add to Wish List

Qty

Sale - Save 24%

$ 289.99

This product was last offered at the strikethrough price on
04-16-2026

$ 219.12 USD

Add to Wish List

Comes with a flex disc (giubo), a precision-engineered center support bearing (CSB), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E39 540i ...

T#:6061694

Part#: BMW06A0

Ships in 1 Business Day

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E60/61 E6...

T#:22394036

Part#: 4744865TCKTS6J5G

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Driveshaft CV Joint Replacement Kits

T#:15710758

Part#: 26117542264-KT

In Stock

$ 582.99 USD

Add to Wish List

Qty

$ 582.99 USD

Add to Wish List

This kit includes every thing needed for a complete CV joint install, includes CV Joint, grease, and needed hardware.

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E30 RWD (...

T#:6061687

Part#: BMW03A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E60/61 E6...

T#:4744865

Part#: BMW02A0

Ships in 1 Business Day

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW F01/02 7-...

T#:6076536

Part#: BMW14A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E85/E86 Z...

T#:18070238

Part#: 7687533TCKHMEMIR

In Stock at Vendor

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JXB Driveshaft Center Support Bearing Carrier Upgrade

T#:25772541

Part#: 4507854PDKNGJY2Q

Ships in 5 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E85/E86 E...

T#:7687533

Part#: BMW15A0

In Stock at Vendor

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Center Support Bearing Carrier - Track Bushings

T#:6151348

Part#: BMW13A0-T

Ships in 4 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E30 3-Ser...

T#:6061699

Part#: BMW09A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Overhaul Kit - With Giubo and CSB - E90, E92

For vehicles with automatic transmission only!

T#:41222062

Part#: 261175732761AKT

In Stock at Vendor

$ 331.54 USD

Add to Wish List

Qty

$ 331.54 USD

Add to Wish List

Comes with a flex disc (giubo), a precision-engineered center support bearing (CSB), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

JXB Driveshaft Center Support Bearing Carrier Upgrade

T#:25540331

Part#: 4488208PDKVXXZYU

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW F10 M5, F...

T#:6061697

Part#: BMW08A0

In Stock

Sale - Save 19% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD

Add to Wish List

Sale - Save 19%

$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Center Support Bearing Carrier - Street & Track Bushings ...

T#:6061648

Part#: BMW07A0-B

Ships in 5 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

The original center support bearing carrier from the factory employs a thin layer of rubber to secure the driveshaft, minimizing movement to reduce noise and vibrations in the vehicle's cabin. However, this design struggles to maintain the bearing's alignment under load, leading to gradual sagging and misalignment of the driveshaft. This, in turn, results in play during gear shifts and throttle application. Even in well-maintained vehicles, the initial rubber bushing can deteriorate and turn brittle, often developing cracks within 5-10 years. When this deterioration occurs, it can lead to heightened vibrations, clunking noises, and increased stress on the bearing. Additionally, replacing the stock carrier is a challenging task because it is permanently connected to the center support bearing, necessitating specialized tools for replacement.

Show More Show Less

VTT - Carbon Fiber Driveshaft - G87 M2

T#:35998387

Part#: VTT-BMW-CF-G87

Ships in 10 Business Days

$ 2,136.99 USD

Add to Wish List

Qty

$ 2,136.99 USD

Add to Wish List

The Vargas Turbo Technologies Carbon Fiber Driveshaft for the G87 M2 is a game-changer for BMW G87 M2 enthusiasts who demand top-tier performance and reliability. Engineered with precision and crafted from advanced carbon fiber, this driveshaft delivers a perfect balance of strength, lightweight construction, and improved drivability. Ideal for spirited street driving or aggressive track days, it sets a new standard in drivetrain performance.

Key Features and Benefits Lightweight carbon fiber reduces rotational mass for faster acceleration and improved handling Exceptional strength and durability to withstand high-torque applications Enhanced drivetrain efficiency with minimized power loss during transmission Precision-engineered for the BMW G87 M2 to ensure seamless installation Vibration-damping properties provide a smoother and quieter ride Available at Turner Motorsport, a trusted name in BMW performance upgrades The Vargas Turbo Technologies carbon fiber driveshaft is the ultimate upgrade for your BMW G87 M2, enhancing performance, efficiency, and driving enjoyment.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E3 E10 E1...

T#:6061700

Part#: BMW10A0

Ships in 4 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E65 E66 7...

T#:6061690

Part#: BMW05A0

Ships in 4 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E60 M5, E...

T#:6061696

Part#: BMW07A0

Ships in 4 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Overhaul Kit - With Giubo and CSB - E9x Xdrive

T#:41255908

Part#: 26117573276FKT

Ships in 4 Business Days

Sale - Save 4% $ 548.99

This product was last offered at the strikethrough price on
04-08-2026

$ 526.29 USD

Add to Wish List

Qty

Sale - Save 4%

$ 548.99

This product was last offered at the strikethrough price on
04-08-2026

$ 526.29 USD

Add to Wish List

Comes with two flex discs (giubo), a precision-engineered center support bearing (CSB), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

Driveshaft CV Joint Replacement Kit

T#:15744032

Part#: 261175483920-KT

Ships in 1-2 days

$ 528.99

This product was last offered at the strikethrough price on
04-15-2026

$ 525.99 USD

Add to Wish List

Qty

$ 525.99 USD

Add to Wish List

This kit includes every thing needed for a complete CV joint install, includes CV Joint, grease, and needed hardware.

Driveshaft Overhaul Kit - With Giubo and CSB - E90, E92

T#:41222061

Part#: 261175732761TKT

Ships in 3 Business Days

$ 302.95 USD

Add to Wish List

Qty

$ 302.95 USD

Add to Wish List

Comes with a flex disc (giubo), a precision-engineered center support bearing (CSB), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

M3 Driveshaft Rebuild Kit - E9X S65

T#:24212292

Part#: E9X65FLXCVKT

Ships in 3 Business Days

$ 878.99

This product was last offered at the strikethrough price on
05-07-2026

$ 857.99 USD

Add to Wish List

Qty

$ 857.99 USD

Add to Wish List

Replaces your Flex Disc, CV Joint, and Center Mount

Driveshaft Overhaul Kit - With Giubo and CSB

T#:41391190

Part#: 26112228781TKT

Ships in 3 Business Days

$ 757.34

This product was last offered at the strikethrough price on
04-17-2026

$ 732.70 USD

Add to Wish List

Qty

$ 732.70 USD

Add to Wish List

For BMW enthusiasts who demand precision and performance, the Driveshaft Overhaul Kit - With Giubo and CSB - E39 M5 delivers a reliable fix to one of the most common wear points in the E39’s driveline system—restoring the legendary driving feel of the M5.

Show More Show Less

Genuine BMW - Driveshaft Service Kit - E46 M3 - E46, Z4

T#:41695018

Part#: 26122282495TKT

Ships in 3 Business Days

$ 687.99 USD

Add to Wish List

Qty

$ 687.99 USD

Add to Wish List

Maintain the integrity of your BMW’s driveline with the Driveshaft Service Kit - E46 M3 - Genuine BMW - E46, Z4—a high-quality, OEM solution for restoring factory-level performance and comfort.

Show More Show Less

Universal Flex Disc Kit - E36, E46

T#:5389783

Part#: 26112226527TMSKT

Back Ordered

Sale - Save 16% $ 357.99

This product was last offered at the strikethrough price on
04-16-2026

$ 300.82 USD

Add to Wish List

Qty

Sale - Save 16%

$ 357.99

This product was last offered at the strikethrough price on
04-16-2026

$ 300.82 USD

Add to Wish List

This kit also includes a new Giubo, and drive shaft center mount with bearing to ensure proper drive shaft placement.

Driveshaft Overhaul Kit - With Giubo and CSB

T#:15644281

Part#: 26117574872KT

Back Ordered

Sale - Save 16% $ 357.99

This product was last offered at the strikethrough price on
04-16-2026

$ 300.82 USD

Add to Wish List

Qty

Sale - Save 16%

$ 357.99

This product was last offered at the strikethrough price on
04-16-2026

$ 300.82 USD

Add to Wish List

Located between the transmission and driveshaft, the giubo (also giubo) joint is a flexible rubber drive coupling that joins driveline components to reduce vibration, while allowing a limited range of flexibility. Joint rubber deteriorates over time from torque stress and heat hardening. A failed joint is a common cause of driveline noise and vibration. This kit includes a new drive shaft center mount with bearing to insure proper driveshaft placement. Includes Driveshaft center support bearing (csb) Driveshaft front flex disc (giubo) installation hardware for flex disc and center support bearing Driveshaft centering bearing Butyl tape for center support bearing insulation

Show More Show Less

Driveshaft Overhaul Kit - BMW F30 335i, F32 435i Automatic

T#:53608884

Part#: TF3XADOKT

In Stock at Vendor

$ 255.54 USD

Add to Wish List

Qty

$ 255.54 USD

Add to Wish List

The flex disc (aka universal joint or guibo/giubo) and center support bearing (CSB) often fail over time. A failing flex disc can cause clunks when shifting from park to reverse/drive, driveline slop, and excess vibrations when accelerating. A failing CSB will often cause a rhythmic vibration under the center console that increases in tempo as the car increases in speed, squealing or grinding noises from the bearing failure, and driveline vibration/shaking at higher speeds. When replacing either of these items, it is best to replace the associated components to ensure your driveshaft is properly supported and connected to the transmission output and differential input. This kit includes all of the basic items needed to complete this service in your BMW.

Show More Show Less

Driveshaft Overhaul Kit - With Giubo and CSB - E90

T#:41222039

Part#: 261175114541TKT

In Stock

Sale - Save 3% $ 274.99

This product was last offered at the strikethrough price on
05-30-2026

$ 267.93 USD

Add to Wish List

Qty

Sale - Save 3%

$ 274.99

This product was last offered at the strikethrough price on
05-30-2026

$ 267.93 USD

Add to Wish List

Comes with a flex disc (giubo), a precision-engineered center support bearing (CSB), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

Driveshaft Overhaul Kit - BMW F22/23 M235i xDrive

T#:54995067

Part#: TF22M235XDOKT

In Stock

$ 239.40 USD

Add to Wish List

Qty

$ 239.40 USD

Add to Wish List

The flex disc (aka universal joint or guibo/giubo) and center support bearing (CSB) often fail over time. A failing flex disc can cause clunks when shifting from park to reverse/drive, driveline slop, and excess vibrations when accelerating. A failing CSB will often cause a rhythmic vibration under the center console that increases in tempo as the car increases in speed, squealing or grinding noises from the bearing failure, and driveline vibration/shaking at higher speeds. When replacing either of these items, it is best to replace the associated components to ensure your driveshaft is properly supported and connected to the transmission output and differential input. This kit includes all of the basic items needed to complete this service in your BMW.

Show More Show Less

Driveshaft Center Support Bearing Carrier - Track Bushings

T#:6061652

Part#: BMW08A0-T

Ships in 5 Business Days

Sale - Save 15% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

Qty

Sale - Save 15%

$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.

Show More Show Less

VTT BMW Carbon Fiber Driveshaft - G8X RWD

T#:44122898

Part#: DRVSTCFG8XRWD

Ships in 10 Business Days

$ 1,999.99 USD

Add to Wish List

Qty

$ 1,999.99 USD

Add to Wish List

Upgrade your driveshaft to carbon fiber to reduce weight while improving driveline responsiveness and feel thanks to the elimination of rubber universal joints.

VTT BMW Carbon Fiber Driveshaft - G8X XDrive

T#:44122897

Part#: DRVSTCFG8XAWD

Ships in 10 Business Days

$ 1,999.99 USD

Add to Wish List

Qty

$ 1,999.99 USD

Add to Wish List

Upgrade your driveshaft to carbon fiber to reduce weight while improving driveline responsiveness and feel thanks to the elimination of rubber universal joints.

VTT - Carbon Fiber Driveshaft F87 M2

T#:35964563

Part#: VTT-BMW-DRIVESHA

Ships in 10 Business Days

$ 1,993.99 USD

Add to Wish List

Qty

$ 1,993.99 USD

Add to Wish List

The Vargas Turbo Technologies - Carbon Fiber Driveshaft F87 M2 is the ultimate upgrade for BMW F87 M2 owners who crave superior performance and efficiency. Designed with precision and crafted from lightweight carbon fiber, this driveshaft enhances your vehicle’s drivetrain by reducing rotational mass and improving throttle response. Ideal for both street and track use, this driveshaft offers unmatched durability and reliability.

Improved acceleration and throttle response with reduced rotational mass
Lightweight carbon fiber construction for enhanced strength and durability
Reduced drivetrain vibration for a smoother, quieter ride
Direct fitment for the BMW F87 M2, ensuring easy installation and compatibility
Optimized for high-performance driving on both road and track

Engineered by Vargas Turbo Technologies, a trusted leader in performance upgrades, the Carbon Fiber Driveshaft is perfect for enthusiasts who demand excellence. Available through Turner Motorsport, this component is designed to elevate your BMW F87 M2’s driving experience to new heights.

Show More Show Less

Driveshaft Overhaul Kit - F32 435i xDrive, F22 M235i xDrive

T#:54995059

Part#: TF32435XDOKT

In Stock at Vendor

$ 246.97 USD

Add to Wish List

Qty

$ 246.97 USD

Add to Wish List

The flex disc (aka universal joint or guibo/giubo) and center support bearing (CSB) often fail over time. A failing flex disc can cause clunks when shifting from park to reverse/drive, driveline slop, and excess vibrations when accelerating. A failing CSB will often cause a rhythmic vibration under the center console that increases in tempo as the car increases in speed, squealing or grinding noises from the bearing failure, and driveline vibration/shaking at higher speeds. When replacing either of these items, it is best to replace the associated components to ensure your driveshaft is properly supported and connected to the transmission output and differential input. This kit includes all of the basic items needed to complete this service in your BMW.

Show More Show Less

Driveshaft Center Support Bearing Carrier Upgrade - BMW E46 (AWD) 3 S...

T#:34382132

Part#: BMW17A0

Ships in 4 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Vargas Carbon Fiber Driveshaft - Toyota A90/91 Supra

T#:51672704

Part#: VTT-SUPRA-DRIVES

Ships in 10 Business Days

$ 1,769.99 USD

Add to Wish List

Qty

$ 1,769.99 USD

Add to Wish List

The VTT A90/91 Supra Carbon Fiber Driveshaft is the definitive solution for MK5 owners who demand ultimate strength without the drag of a heavy OEM assembly.