Find Parts That Fit Your Vehicle

BMW Driveshafts

Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft? Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft. We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement. All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately). The whole unit is then dynamically balanced on a precision Axiline Balancer.

Sub-Categories

Sort By:

JXB Performance - Corporate Logo
T#:4988548
Part#: BMW04A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.
Show More Show Less
JXB Performance - Corporate Logo
T#:4744858
Part#: BMW01A0-S
In Stock
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping

The stock center support bearing carrier is engineered to minimize noise, vibration, and harshness (NVH) in the cabin by loosely securing the center bearing with a soft rubber bushing. However, this design allows the driveshaft to move off-center during launches and shifts, reducing throttle response and causing drivetrain oscillations. Over time, the rubber bushing can sag or dry rot, leading to misalignment of the driveshaft.

Prevent or fix this common problem with JXB Performance's Driveshaft Center Support Bearing Upgrade! This upgrade features a simple yet highly effective 2-piece design that makes installation and bushing replacement effortless. The stock carrier is cut away, and the JXB bushings securely "clamp" the driveshaft bearing in place, ensuring constant driveshaft alignment.

The Street bushing option from JXB is the most popular choice, offering a significant improvement over the stock design while keeping NVH levels minimal.

Note: Some light NVH, such as a soft hum, may occur at certain speeds. However, with a modified exhaust or open windows, it’s unlikely to be noticeable.

Installation is straightforward and doesn’t require removing the driveshaft. The 2-piece design clamps directly onto the OEM bearing, though removing the old carrier will require a cutting tool.

Need replacement or additional bushings? See T#4799658 for replacement street bushings.

Show More Show Less
JXB Performance - Corporate Logo
T#:6076533
Part#: BMW12A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less

JXB Performance - Corporate Logo
T#:4744864
Part#: BMW01A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.
Show More Show Less

Genuine BMW - Corporate Logo
T#:53740
Part#: 26128615622
In Stock
3% off MSRP $ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping
3% off MSRP
$ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping


Genuine BMW Center Mount, Aluminium
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F30,F32,F33

Genuine BMW - Corporate Logo
T#:2532
Part#: 26122282495
In Stock
5% off MSRP $ 200.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.69 USD
Free Shipping
5% off MSRP
$ 200.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.69 USD
Free Shipping
This Driveshaft Center Support Bearing fits the following BMWs:
2001-2006 E46 3 Series M3, M3 Convertible
2003-2008 E85 E86 Z4 Z4 M Roadster Z4 M Coupe

JXB Performance - Corporate Logo
T#:6076534
Part#: BMW13A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
Genuine BMW - Corporate Logo
T#:53734
Part#: 26122283046
Ships in 3 Business Days
11% off MSRP $ 184.85

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.09 USD
Free Shipping
11% off MSRP
$ 184.85

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.09 USD
Free Shipping
These carrier bearings support the drive shaft, with a bearing and rubber mount. Bearings fail due to mileage resulting in a howling noise, rubber mounts also fail which cause the drive shaft to bounce around.
Show More Show Less

Genuine BMW - Corporate Logo
T#:198728
Part#: 26112284776
Ships in 2 Business Days
6% off MSRP $ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 280.99 USD
Free Shipping
6% off MSRP
$ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 280.99 USD
Free Shipping
Positioned between the transmission and driveshaft, the **giubo (or guibo) joint** is a flexible rubber coupling that connects driveline components, reducing vibrations while allowing limited movement. Over time, the rubber can degrade due to torque stress and heat exposure, leading to driveline noise and vibration. ### **Maintenance & Replacement:** - Regularly inspect for heat-related cracks or rubber tears during routine maintenance. - Replace worn or damaged joints promptly to prevent further driveline issues or costly repairs.
Show More Show Less

Genuine BMW - Corporate Logo
T#:584099
Part#: 26112282573TMSKT
Ships in 5 Business Days
$ 517.99 USD
Free Shipping
$ 517.99 USD
Free Shipping
This kit includes a new Flex Disc (Giubo) and Center Support Mount with all of the hardware needed to install these. All parts included are from Genuine BMW for guaranteed fitment and long-lasting function.
Show More Show Less
Driveshaft Carrier Spare Bushing Set - Track
Spare bushings only - does not include new carrier assembly
JXB Performance - Corporate Logo
T#:4799659
Part#: BSH04A1
In Stock
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.
Driveshaft Carrier Spare Bushing Set - Street
Spare bushings only - does not include new carrier assembly
JXB Performance - Corporate Logo
T#:4799658
Part#: BSH04A0
Ships in 4 Business Days
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.


JXB Performance - Corporate Logo
T#:6061694
Part#: BMW06A0
Ships in 1 Business Day
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
Genuine BMW - Corporate Logo
T#:360784
Part#: 26117511454
Ships in 1-2 days
6% off MSRP $ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD
Free Shipping
6% off MSRP
$ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD
Free Shipping
This Genuine BMW replacement flex disc (aka: the guibo) is a vibration dampener mounted on the back of the transmission which connects to the driveshaft. When it has worn, it produces a terrible vibration throughout the car. It's especially noticeable at low speeds and when starting from a standstill. Oil leaking from the back of the transmission will significantly reduce its life.
Show More Show Less
Genuine BMW - Corporate Logo
T#:360785
Part#: 26127501257
In Stock
2% off MSRP $ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
2% off MSRP
$ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
Replace this center mount to restore a vibration free driveline.

Genuine BMW - Corporate Logo
T#:53656
Part#: 26112282725
In Stock
4% off MSRP $ 363.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 347.99 USD
Free Shipping
4% off MSRP
$ 363.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 347.99 USD
Free Shipping


Genuine BMW Const.-Veloc. Joint Wthout Knurled Bush - Lk=94Mm (Z=34)
This item fits the following BMW Chassis:
E60 M5,E63 M6,E82 1M Coupe,E63,E82,E90,E92,E93,F06,F10,F12,F13

Show More Show Less

JXB Performance - Corporate Logo
T#:6061687
Part#: BMW03A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
JXB Performance - Corporate Logo
T#:4744865
Part#: BMW02A0
Ships in 1 Business Day
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.
Show More Show Less

Genuine BMW - Corporate Logo
T#:15305
Part#: 26111229099
Ships in 5 Business Days
2% off MSRP $ 446.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 435.99 USD
Free Shipping
2% off MSRP
$ 446.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 435.99 USD
Free Shipping


Genuine BMW Constant-Velocity Joint Wth Knurled Bush - Lk=94Mm (Z=28)
This item fits the following BMW Chassis:
E39 M5,E39

Genuine BMW - Corporate Logo
T#:368033
Part#: 26117518304
Ships in 8 Business Days
2% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD
Free Shipping
2% off MSRP
$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD
Free Shipping

Part Number: 26117518304

This Genuine BMW U-Joint fits on the front and rear of your driveshaft - a worn U-Joint can cause problems with your drivetrain. Prevent further drivetrain damage by replacing your U-Joints.

Show More Show Less

Genuine BMW - Corporate Logo
T#:22737
Part#: 26128615621
In Stock
6% off MSRP $ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD
Free Shipping
6% off MSRP
$ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD
Free Shipping


Genuine BMW Center Mount, Aluminium -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F31,F32,F33,F34,F36


JXB Performance - Corporate Logo
T#:6076536
Part#: BMW14A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
JXB Performance - Corporate Logo
T#:7687533
Part#: BMW15A0
In Stock at Vendor
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
Genuine BMW - Corporate Logo
T#:53744
Part#: 26127588544
Ships in 1-2 days
6% off MSRP $ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD
Free Shipping
6% off MSRP
$ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD
Free Shipping


Genuine BMW Center Mount, Aluminium -
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13



Genuine BMW - Corporate Logo
T#:185159
Part#: 26112284495
Ships in 5 Business Days
6% off MSRP $ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 280.99 USD
Free Shipping
6% off MSRP
$ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 280.99 USD
Free Shipping


Genuine BMW Universal Joint - Lk=110mm
This item fits the following BMW Chassis:
F06,F10,F12,F13

Genuine BMW - Corporate Logo
T#:360783
Part#: 26112226527
Ships in 3 Business Days
3% off MSRP $ 340.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 331.99 USD
Free Shipping
3% off MSRP
$ 340.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 331.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:59518
Part#: 33132229972
Ships in 3 Business Days
8% off MSRP $ 262.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 241.99 USD
Free Shipping
8% off MSRP
$ 262.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 241.99 USD
Free Shipping


Genuine BMW Drive Flange, Output, Right - Lk=102Mm/M12
This item fits the following BMW Chassis:
E60 M5,E63 M6,E82 1M Coupe,E63,E82,E90,E92,E93


JXB Performance - Corporate Logo
T#:6151348
Part#: BMW13A0-T
Ships in 4 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.
Show More Show Less

JXB Performance - Corporate Logo
T#:6061699
Part#: BMW09A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
Genuine BMW - Corporate Logo
T#:372603
Part#: 26117610061
In Stock
6% off MSRP $ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 222.99 USD
Free Shipping
6% off MSRP
$ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 222.99 USD
Free Shipping
Replacement genuine BMW flex disc (guibo). 105mm diameter. 12mm bolt. Alternate BMW#26117546425. Application and transmission specific! See below 

This item fits the following BMWs:
2008-2012  E82 BMW  135i 1M Coupe 
2006-2011  E90 BMW  335d 335i - Sedan
2007-2012  E92 BMW  335i 335is - Coupe
2007-2012  E93 BMW  335i - Convertible
2007-2010  E60 BMW  535i
2005-2010  E60 BMW  550i - Automatiic Transmission
2010+  F07 BMw  535i GT, 535i xDrive GT, 550i xDrive GT
2011+  F10 BMw  535i 535i xDrive 550i xDrive
2004-2011  E63 BMW  650i - Automatic Transmission
2009+  F01 BMW  740i 740li 750i xDrive 750li xDrive
2009-2010  Z4 BMW  Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Genuine BMW - Corporate Logo
T#:7680
Part#: 26121229243
In Stock
8% off MSRP $ 196.79

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 180.99 USD
Limited Qty Sale
Free Shipping
8% off MSRP
$ 196.79

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 180.99 USD
Limited Qty Sale
Free Shipping


Genuine BMW Center Mount -
This item fits the following BMW Chassis:
E39

Genuine BMW - Corporate Logo
T#:4110
Part#: 26122227278
In Stock
8% off MSRP $ 285.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 262.99 USD
Limited Qty Sale
Free Shipping
8% off MSRP
$ 285.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 262.99 USD
Limited Qty Sale
Free Shipping
Genuine BMW Replacement Center Support Bearing. A worn-out center support bearing can lead to some annoying side-effects. The driveshaft on BMWs is broken up into 2 sections. The center support bearing is where the 2 sections meet. It consists of a metal bearing in the middle that is surrounded by vibration-absorbing rubber. As the vehicle ages the rubber becomes weak and rips away from the bearing. The result is a vibration and a bad thumping or knocking sound.

This item fits the following BMWs:
1995-1999 E36 BMW M3, M3 Convertible
1998-2002 Z3 BMW M Roadster M Coupe
Show More Show Less

Genuine BMW - Corporate Logo
T#:19955
Part#: 26121227997
In Stock
8% off MSRP $ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.99 USD
Limited Qty Sale
Free Shipping
8% off MSRP
$ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.99 USD
Limited Qty Sale
Free Shipping
This is a Genuine BMW replacement center support bearing for the driveshaft. Often the cause of annoying vibrations and clunking noises during take-offs. This is the OEM bracket with bearing.

This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il 750il
Show More Show Less

JXB Performance - Corporate Logo
T#:6061697
Part#: BMW08A0
In Stock
Sale - Save 19% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD
Free Shipping
Sale - Save 19%
$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
JXB Performance - Corporate Logo
T#:6061700
Part#: BMW10A0
Ships in 4 Business Days
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
JXB Performance - Corporate Logo
T#:6061696
Part#: BMW07A0
Ships in 4 Business Days
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less


Genuine BMW - Corporate Logo
T#:12090
Part#: 26121229317
Ships in 1-2 days
2% off MSRP $ 161.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
2% off MSRP
$ 161.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
Replacement center support bearing for the driveshaft. Often the cause of annoying vibrations and clunking noises during take-offs. This is the OEM aluminum bracket with bearing.

This item fits the following BMWs:
2001-2005 E46 BMW 325xi 330xi
Show More Show Less
Genuine BMW - Corporate Logo
T#:368039
Part#: 26121226723
Ships in 1-2 days
3% off MSRP $ 332.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 323.99 USD
Free Shipping
3% off MSRP
$ 332.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 323.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:12089
Part#: 26111229360
Ships in 1-2 days
6% off MSRP $ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD
Free Shipping
6% off MSRP
$ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD
Free Shipping
This OEM BMW replacement flex disc (aka: the guibo) is a vibration dampener mounted on the back of the transmission which connects to the driveshaft. When it has worn, it produces a terrible vibration throughout the car. It's especially noticeable at low speeds and when starting from a standstill. Oil leaking from the back of the transmission will significantly reduce its life.

This item fits the following BMWs:
1999-2005 E46 BMW 325xi 330xi
2011+ F10 BMw 528i xDrive
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
2004-2006 E53 BMW X5 4.4i X5 4.8is
2009+ E70 BMW X5 4.8i X5 xDrive35d X5 xDrive48i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
Show More Show Less

Genuine BMW - Corporate Logo
T#:53738
Part#: 26127521855
Ships in 1-2 days
2% off MSRP $ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
2% off MSRP
$ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping


Genuine BMW Center Mount, Aluminium -
This item fits the following BMW Chassis:
E83 X3


Genuine BMW - Corporate Logo
T#:368030
Part#: 26111225624
Ships in 1-2 days
6% off MSRP $ 213.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 200.99 USD
Free Shipping
6% off MSRP
$ 213.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 200.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:53724
Part#: 26117610372
Ships in 1-2 days
6% off MSRP $ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD
Free Shipping
6% off MSRP
$ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD
Free Shipping
Located between the driveshaft and the transmission, this disc absorbs hard vibrations and shocks from shifting gears. As time goes on, the rubber degrades and replacement is the only option. If you are noticing increased vibrations and clunking, it may be time to replace this disc to ensure that your vehicle drives the way it should. Inspect your guibo for wear and damage every other oil change - Replace at the first sign of wear. Genuine BMW Universal Joint - Lk=96Mm/M12 This item fits the following BMW Chassis: F10,F22,F30,F31,F32,F33,F34,F36
Show More Show Less

Genuine BMW - Corporate Logo
T#:53715
Part#: 26117548392
Ships in 1-2 days
7% off MSRP $ 382.97

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 355.99 USD
Free Shipping
7% off MSRP
$ 382.97

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 355.99 USD
Free Shipping


Genuine BMW Const.-Veloc. Joint Wthout Knurled Bush - Lk=86Mm (Z=32)
This item fits the following BMW Chassis:
E46,E63,E65

Genuine BMW - Corporate Logo
T#:181146
Part#: 26208605866
Ships in 1-2 days
4% off MSRP $ 1,411.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,348.99 USD
Free Shipping
4% off MSRP
$ 1,411.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,348.99 USD
Free Shipping

This is a Genuine BMW replacement for a broken or damaged front drive shaft.


Genuine BMW Drive Shaft Assy Front - L=709Mm
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F15,F16

 

Show More Show Less

Genuine BMW - Corporate Logo
T#:53742
Part#: 26127558745
Ships in 1-2 days
6% off MSRP $ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD
Free Shipping
6% off MSRP
$ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD
Free Shipping


Genuine BMW Center Mount, Aluminium
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F15,F16,F25 X3,F26 X4 X4


Genuine BMW - Corporate Logo
T#:12114
Part#: 26112228781
Ships in 1-2 days
3% off MSRP $ 340.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 331.99 USD
Free Shipping
3% off MSRP
$ 340.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 331.99 USD
Free Shipping
This Genuine BMW replacement flex disc (aka: the guibo) is a vibration dampener mounted on the back of the transmission which connects to the driveshaft. When it has worn, it produces a terrible vibration throughout the car. It's especially noticeable at low speeds and when starting from a standstill. Oil leaking from the back of the transmission will significantly reduce its life.

This item fits the following BMWs:
2000-2003 E39 BMW M5
Show More Show Less
Genuine BMW - Corporate Logo
T#:368040
Part#: 26121226731
Ships in 5 Business Days
2% off MSRP $ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
2% off MSRP
$ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:212394
Part#: 33131428124
Ships in 1-2 days
3% off MSRP $ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 229.99 USD
Free Shipping
3% off MSRP
$ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 229.99 USD
Free Shipping


Genuine BMW Drive Flange Output - Lk=86Mm/M10
This item fits the following BMW Chassis:
E46,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93



Genuine BMW - Corporate Logo
T#:53739
Part#: 26127521856
Ships in 1-2 days
2% off MSRP $ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
2% off MSRP
$ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping


Genuine BMW Center Mount, Aluminium -
This item fits the following BMW Chassis:
E63

Genuine BMW - Corporate Logo
T#:53733
Part#: 26122282572
Ships in 1-2 days
2% off MSRP $ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
2% off MSRP
$ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping


Genuine BMW Center Mount, Aluminium
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63