BMW Aero & Body

Enhance both the aesthetics and aerodynamics of your vehicle with the E36 LTW Style Front Lip in Matte Black by Turner Motorsport. This front lip not only transforms your car's appearance but also contributes to downforce, improving overall handling at higher speeds. Crafted from durable UV-stabilized ABS in a two-piece bonded design, this front lip is a cost-effective and lightweight alternative to traditional carbon fiber options. Perfect for daily drivers and track enthusiasts alike, it provides a clean matte finish reminiscent of the original E36 trim.

Concerned about potential damage? Fear not! This front lip is positioned to endure the challenges of road debris, uneven surfaces, and speed bumps. Additionally, it's designed for compatibility with M3 front bumpers and aftermarket replicas, ensuring a precise fit. Worried about the matte finish? No problem! The lip can be prepped and painted to suit your preferences.

Key Features & Specifications:

• LTW-inspired design for a sleek appearance
• Vacuum-formed ABS plastic with UV-resistant construction
• 2-Piece bonded design enhances rigidity
• Precision fitment designed by TMS engineers using 3D laser scanning & CAD
• Uses factory self-tapping screws for installation (Need new hardware? See ES4159683)
• Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper

Turner Motorsport High Kick Trunk Spoiler. This ABS High Kick Trunk Spoiler is designed and engineered in-house by Turner Motorsport, using cutting-edge 3D laser scanning and CAD technology for precision fitment. Crafted from impact and UV-resistant ABS plastic, this spoiler not only enhances the sporty style of your E36 coupe but also fits your budget without compromising on quality.

Installation:

1. Clean the surface area of the trunk.
2. Remove the backing from the attached high-strength double-sided tape.
3. Line it up and press firmly down.
4. For optimal adhesion, it's recommended to perform the installation in a warm environment.

Additional Features & Specifications:

• Mimics the design of the carbon fiber version for similar styling
• Accentuates OE body lines along the outer edge of the spoiler
• Utilizes 3M double-sided tape for a strong bond to the body
• Lightweight, vacuum-formed gloss black ABS polymer enhanced with UV stabilizer

Direct bolt on steel M5 style fenders. The OE aluminum fenders are tough to roll when making needed clearance more a more aggressive wheel or lowered suspension. Steel fenders will form much easier when rolling allowing you to achieve the perfect fitment you're looking for.

It also includes the mesh center grill.  Comes ready to paint and install. Professional paint and installation is always recommended. 
 

This item fits the following BMWs: 
2004-2010 E60 5 Series BMW 525i 525xi 528i 528xi 530i 530xi 535i 535xi 545i 550i  

MINI R56 Front Left JCW Brake Duct Front Scoop is designed to mount to the middle duct and connect seamlessly to the front bumper or grille. This front section of the brake duct is essential for directing airflow to the brakes, enhancing cooling performance.

• Optimized Airflow: Directs airflow to the brakes, improving cooling efficiency and performance.
• Seamless Integration: Mounts easily to the middle duct and connects to the front bumper or grille for a perfect fit.
• Front Duct Section: Specifically designed as the front section of the brake duct for precise functionality.
• Quality Assurance: Manufactured by an OES supplier, ensuring high-quality and reliable performance.

Introducing ADRO's exclusive boutique creation: the one-of-a-kind E92 M3 AT-R1 Swan Neck Wing, a true masterpiece in automotive aesthetics and performance. Crafted with precision and passion, this wing is unlike any other on the market, meticulously handmade with pre-preg carbon fiber to achieve unparalleled quality and style.

The pre-preg carbon fiber construction not only ensures exceptional strength and durability but also lends a unique glossy finish that sets this wing apart from the rest. Each detail is carefully crafted to complement the iconic design of the E92 M3, enhancing its aggressive stance and aerodynamic efficiency.

Designed for enthusiasts who demand the best, this wing is a statement of individuality and sophistication. Elevate your M3 to new heights of exclusivity with our bespoke E92 M3 AT-R1 Swan Neck Wing, where luxury meets performance in every curve and contour.

Includes:

• Pre-Preg Carbon Fiber Wing Deck
• Aluminum Uprights (1 Pair)
• Pre-Preg Carbon Fiber Flat End Plates (1 Pair)
• Carbon Fiber Reinforcement Plates (1 Pair)
• 3M Tape
• Hardware

Unlock Aggressive Style with Turner Motorsport's E36 M3 Street Flow Rear Diffuser Kit & ABS Front Lip!

Achieve an aggressive, cohesive design that enhances your M3's exterior appeal from front to back.

E36 M3 Street Flow Rear Diffuser

The E36 M3 has always been a head-turner, but the rear bumper often lacks the levelled look of the front. With BMW's signature design featuring a lower front bumper compared to the rear—an aesthetic seen across generations—this diffuser brings balance by matching the rear bumper’s height to the front, giving your lowered E36 M3 a sleek, grounded look.

Designed to add a bold edge to your M3, the Street Flow Diffuser is our latest innovation in aggressive styling, specially crafted to bridge the gap between factory lines and custom flair. Each piece is precision-engineered and powder-coated in satin black to perfectly complement the M3's factory trim. Easy to install, the diffuser seamlessly mounts to the rear bumper, ensuring a flawless fit and professional look.

The Street Flow Diffuser is a new venture for Turner Motorsport, diverging from our line of factory-replacement ABS and Carbon Fiber diffusers to deliver a design that pushes the boundaries. After extensive modeling and prototyping, we’re thrilled to debut this product, with more designs in the pipeline. Get ready to take your E36 M3 down a unique path in styling evolution.

Key Features:

Bold Appearance: Complements the OEM rear diffuser with an added aggressive look. Durable Construction: Made from lightweight 10-gauge aluminum, finished with a satin black powder coat for superior durability. Effortless Install: Adjustable slots and hidden color-matched hardware for a streamlined setup. Specifications:

Material: 10-gauge 5052 aluminum with black satin powder coat Design: 5-piece layout for easier installation and maximum fitment adjustment Extra Detail: Includes laser-cut ECS logo and concealed mounting hardware Turner Motorsport ABS Front Lip - Matte Black

An essential upgrade, this ABS Front Lip brings both visual impact and aerodynamic benefits to your M3. The front lip adds downforce for enhanced handling while maintaining a durable build to withstand daily driving conditions, including road debris and uneven surfaces.

Inspired by the E36 LTW design, Turner Motorsport’s ABS Front Lip is a cost-effective alternative to fragile carbon fiber lips. Made from UV-stabilized ABS plastic, this two-piece design resists cracking and shattering, offering a matte black finish that complements the original E36 aesthetic. For added versatility, this lip can be prepped and painted to suit your style preferences.

Features & Specifications:

Inspired Design: E36 LTW-inspired look in a robust ABS form Enhanced Durability: UV-resistant construction for long-lasting performance Precision Fit: Engineered using 3D laser scanning for optimal fitment Easy Install: Uses factory screws and includes pre-applied 3M adhesive for extra security Upgrade your E36 M3’s style with Turner Motorsport’s rear diffuser and front lip combo, adding aggressive lines that turn heads on the street and track alike!