BMW Aero & Body

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E90 All non M submodels

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3

Is the rear end of your F10 boring you? Install an M5 Style trunk spoiler to instantly make your rear end more aggressive. Can be painted to match your vehicle or installed as-is. Install can be completed in minutes with double-sided adhesive.

This product fits the following BMWs:
2010 - 2016 F10 5 Series Sedan 520i 523i 528i 528iX 530i 535i 535iX 550i 550iX M5 

M-Sport Style Front Bumper by ECS Tuning

Enhance your vehicle's aesthetic with the M-Sport style front bumper by ECS Tuning, the perfect addition if you missed out on the factory M-sport package. This bumper offers a sleek, sporty appearance and comes equipped with all necessary components for a hassle-free installation, allowing you to achieve the desired look effortlessly.

Ideal for vehicles without Park Distance Control (PDC), this M-Sport style front bumper is a seamless fit, providing a distinctive and aggressive appearance.

Enhance Your BMW's Appearance with M Styling

Transform your BMW's appearance with this replacement rear bumper, adding aggressive M styling to your vehicle. Available in primer, this bumper is ready for painting, allowing you to customize the look of your BMW effortlessly. Specifically designed for compatibility with quad-tip (Dual-exit) exhaust systems, it ensures a seamless integration with your vehicle's existing setup.

• Adds aggressive M styling to your BMW
• Primer finish ready for painting
• Compatible with quad-tip (Dual-exit) exhaust systems
• Easy to install and customize

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX