Dinan BMW Performance Intake Kits

Dinan has enigneered a new air box cover that allows  you to run a larger air filter but retain a stock-like appearance. The Dinan 330 intake cover seals better to the lower section ensuring no power-robbing hot air enters the intake. A new lower tube draws air from the brake duct, nearly doubling the volume of cool air entering the engine.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2001-2006 E46 BMW 330i 330ci 330xi

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan N55 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds into dual larger volume airbox complete with a larger cone filter that elicit a slightly more audible and sporty tone over its stock counterpart. Dinan claims 10hp and 15ft-lb torque gain with this kit.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: Convertible models require modification to a factory chassis brace. Detailed instructions are included.

This item fits the following BMWs:
2014+ F22 F23 BMW M235i M235iX
2012-2015 F30 BMW 335i 335i X-Drive - Sedan
2012-2016 F32 BMW 435i 435i X-Drive - Coupe
2013-2016 F33 BMW 435i 435i X-Drive - Convertible
2012-2015 F34 BMW 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 435i 435i X-Drive - GranCoupe

Following in the footsteps of the immensely popular and heralded intake for the BMW N55 engine, the next generation of 6 cylinder intake takes the same path to success. Improve upon the factory design by increasing flow via a larger air box and filter element thereby improving throttle response and lessening the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign is a major factor in ultimately producing a more  potent intake they are not the only variables in creating a more efficient design either. The devil is in the details which is where Dinan thrives. Coupled with maintaining Dinan's standard practice of utilizing a sealed system to ensure as much cold, outside air as possible is employed Dinan engineers focused their attention on the intake pipe itself where numerous improvements could be made. In factory configuration the intake tube comes complete with baffling and a small helmholtz chamber to reduce unwanted sound. As a byproduct these features also cause a more turbulent air flow path which robs the factory system of potential power. These 2 specific details are diametrically opposed to our intended markets desires so the removal of these features was paramount. Through numerous iterations a carbon fiber intake tube was developed that eliminated flow disruptions and allowed the natural sound of an unimpeded intake tract to sing. All told this thorough methodology of design allows the Dinan carbon fiber cold air intake for the B58 engine to elicit gains of 15 HP and 13 TRQ @ 6000 RPM on a completely stock vehicle. An impressive feat on today's turbocharged engines.   

Not to be outdone by the performance side of the equation the B58 intake also is completely made up of carbon fiber unlike 6 cylinder intakes of the past where a mix of materials was used. Not only is the intake completely carbon construction but the quality of the material has been improved over previous generations as well. While looks are surely important, and this piece has that department covered in spades, the improved construction and coating also guarantees that the appearance of the engine bay with the Dinan intake will not be marred over time. Built to present well, perform well, and last the duration, the Dinan B58 carbon fiber cold air intake is a modification that is a must for any high high performance build.  

Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F22/F23 M240i, F30/F34 340i and F32/F33/F36 440i:

• More Power: +15 HP & +13 lb-ft of torque @ 6000 RPM without additional modifications (13 WHP / 11 WTQ)
• Sportier Sound
• Improved throttle response
• Larger volume air box (30% larger than stock) that completely seals
• 34% increase in filter area (stock: 76.3in², Dinan: 102.1in²) 
• Optimized carbon fiber intake tube 
• Free flowing injection molded Air Mass Meter housing (8% larger then stock)
• Quick and easy installation

Replacement air filter for Dinan High Flow Carbon Fiber Intake (D760-0052, D760-0055, D760-0058, D760-0059, D760-0065 & D760-0066).

Features:

Deep pleats in multi-layered cotton for increased flow and superior filtration.

Steel wire mesh providing strength and dent resistance.

Custom molded ends allowing for optimum filter surface area within the Dinan air box.

Revitalize your BMW's performance with the Dinan Replacement Air Filter designed for Dinan air intake model D760-0038. Whether your filter is dirty, damaged, or lost, this replacement ensures the restoration of Dinan's expected performance and maintains the optimal functioning of your BMW.

For more than 35 years, Dinan has been a leading tuning company in America, specializing in BMW modifications that prioritize balanced performance while preserving the original driving experience. Every Dinan part is meticulously developed, rigorously tested, and backed by a comprehensive four-year, 50,000-mile warranty. Dinan's commitment to a holistic enhancement approach is symbolized by an exclusive trunk badge awarded to enthusiasts who embrace a complete Dinan conversion, showcasing their dedication to elevated performance.

Following in the footsteps of its big brother on the B58 engine, the 4 cylinder intake takes the same path to success. Improve upon the factory design by increasing flow via a larger airbox and filter element thereby improving throttle response and lessening the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign is a major factor in ultimately producing a more potent intake they are not the only variables in creating a more efficient design either. The devil is in the details which is where Dinan thrives. Coupled with maintaining Dinan's standard practice of utilizing a sealed system to ensure as much cold, outside air as possible is employed Dinan engineers focused their attention on the intake pipe itself where numerous improvements could be made. In factory configuration, the intake tube comes complete with baffling and a small helmholtz chamber to reduce unwanted sound. As a byproduct, these features also cause a more turbulent air flow path which robs the factory system of potential power. These 2 specific details are diametrically opposed to our intended markets desires so the removal of these features was paramount. Through numerous iterations, a carbon fiber intake tube was developed that eliminated flow disruptions and allowed the natural sound of an unimpeded intake tract to sing. All told this thorough methodology of design allows the Dinan carbon fiber cold air intake for the B46/B48 engine to elicit gains of 6 HP and 6 TRQ at 5000 RPM on a completely stock vehicle. An impressive feat on today's turbocharged engines.

Not to be outdone by the performance side of the equation the B46/B48 intake also is completely made up of carbon fiber unlike 4 cylinder intakes of the past where a mix of materials was used. Not only is the intake completely carbon construction but the quality of the material has been improved over previous generations as well. While looks are surely important, and this piece has that department covered in spades, the improved construction and coating also guarantee that the appearance of the engine bay with the Dinan intake will not be marred over time. Built to present well, perform well, and last the duration, the Dinan B46/B48 carbon fiber cold air intake is a modification that is a must for any high-performance build.

Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F22/F23 230i, F30/F31/F34 330i, and F32/F33/F36 430i:

More Power: +6 HP & +6 lb-ft of torque at 5000 RPM
Sportier Sound
Improved throttle response
Larger volume air box (30% larger than stock) that completely seals
34% increase in filter area (stock: 76.3in², Dinan: 102.1in²)
Optimized carbon fiber intake tube
Free flowing injection molded Air Mass Meter housing (over 20% larger than stock)
Quick and easy installation

Dinan's Cold Air Intake system for the F06/F13 M6 adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New airbox covers incorporate carbon fiber air ducts that run to the top of the radiator support where it gets a ram-air effect from the front grilles. The new airbox cover and piping are designed with a composite material that blocks hot air. A K&N high flow air filter that has 77% more surface area than stock sits in the new airbox. Dinan has shown peak gains of 13hp and 9ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6