AFE BMW Performance Intake Kits

MINI R60 R61 Magnum FORCE Pro DRY S Stage-2 Intake System delivers impressive performance gains and efficiency. Designed to enhance engine power, this intake system offers the following benefits:

• +18 HP / +20 lbs. x ft. Torque Max Gains: Significant improvements in horsepower and torque.
• 49% Increase in Airflow: Outflows the factory intake for better performance.
• Pro Dry S Oil-Free Filter: Washable and reusable for maximum convenience and minimal maintenance.
• 2.75" Mandrel-Bent Aluminum Tube: Wrinkle-black powder-coated for improved volumetric efficiency and performance.
• Powder-Coated One-Piece Housing: Utilizes stock mounting locations for a clean, secure fit.
• Clear Coated Anodized Aluminum Cover: Adds a stylish touch to your engine bay.
• No Cutting or Drilling Required: Easy installation with no modification to OEM parts.

A simple 30-minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high-quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red). This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +33 horsepower and up to +50 lbs. x ft. of torque verified by our in-house dyno.

Direct Plug & Play Power:
This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response.

In-Cabin On-the-Fly Power Adjustments:
SCORCHER GT modules feature In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin.

High-Quality Case & Wire Harness:
aFe SCORCHER GT modules use high-quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors.

High Precision and Quality:
SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.

aFe POWER does not recommend to use with any other tuners or modules.

This SCORCHER GT is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
2016-2018 F87 M2 N55

This F87 BMW M2 N55 intake kit is an excellent option for anyone to improve their engine intake air flow significantly over the stock air box.

• +15 HP / +13 lbs. x ft. Torque max gains
• Outflows factory intake
• High Quality One-Piece Sealed Housing with Auxiliary Air Inlet
• CAD-Designed Roto-Molded Intake Tube
• Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
• Pro DRY S oil-free 3-Layer Synthetic Media for Maximum
• Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
• No Cutting or Drilling on Factory Parts for Faster Installation

Unique One-Piece High Quality Housing w/ Auxiliary Inlet:
The smooth one-piece high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Unique Filter-to-Housing Interface.(US PAT 9440175)

Carbon Fiber Trim On Housing:
This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 3-Layer Performance Air Filter:
The Momentum GT intake is designed around an oil-free, large 7-1/2" tall inverted top 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium stainless steel clamp is used for strength while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
F87 M2

7" Tall Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Unique One-Piece High-Quality Housing:
A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake.

High-Quality Tube:
This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media for better air flow, and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
2014-2016 E89 Z4 28i

This Momentum intake system produced up to 28hp and 31lbs. x ft. torque and outflows the factory intake by 29%. This intake system uses twin black rotomolded airboxes that keeps warm engine air out for maximum performance. The housing uses a unique Patent Pending filter to housing interface that enables us to use the largest filters possible while maintaining a simple hassle-free installation. The kit comes complete will all necessary hardware. This intake utilizes dual, 6-1/2" tall conical The PRO 5R performance air filter features 5-layers of progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Unique One-Piece Dual Housings:
The smooth one-piece high quality sealed dual housings with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

High Quality Tubes:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-mold intake tubes to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
The Momentum intake is designed around a pre-oiled, large 6-1/2" Tall round inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium clamps and reinforced silicone couplings are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Features and Specifications:

• +28 HP / +31 lbs. x ft. Torque max gains
• Outflows factory intake system by 29%
• CAD-Designed Roto-Molded Intake Tubes
• High Quality One-Piece Sealed Dual Housings with Auxiliary Air Scoop
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R pre-oiled, washable/reusable air filter for maximum performance
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on OEM Parts for Faster Installation

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 12 horsepower and 16 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.