BMW Drivetrain Parts

OEM Hengst Automatic Transmission Filter Kit - GA8HP75 GAHP76 - BMW F...

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:29500091

Part#: 24007855263

In Stock

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

This is a brand new automatic transmission filter service kit from OEM Hengst for the GAHP75 and GAHP76 transmissions found in many of the newer BMW M cars, including the G8X M2, M3, & M4, F90 M5, F91/92/93 M8, F97 X3M, F98 X4M, F85 X5M, and F86 X6M. This kit includes all of the basic components needed to service your transmission, other than the transmission fluid. Included: Oil Pan Gasket Oil Filter Drain & Fill Plugs Oil Pan Mounting Screws (Qty 13) As per ZF's recommendations, we suggest replacing your filter and changing your fluid every 50,000 miles. If your vehicle is modified and makes more power than stock, or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.

Show More Show Less

Revshift Polurethane Transmission Mount Set - 95A (Track - Green) - E...

T#:600155

Part#: PTM-BT

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

95A Track (Green): Significantly stiffer and stronger than OEM rubber. Noticeable increase in NVH. Excellent for enthusiastically driven street and track cars.

OE Getrag Transmission Pump Suction Filter - DCT - F06/10/12/13 M5 M6...

T#:641898

Part#: 28107850148

In Stock at Vendor

$ 150.99

This product was last offered at the strikethrough price on
05-07-2026

$ 134.99 USD

Add to Wish List

Qty

$ 134.99 USD

Add to Wish List

The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that lasts a lifetime. When you do decide to replace the transmission fluid, make sure you also replace your transmission filter to prevent any and all debris from getting pulled through and causing damage.

Show More Show Less

Revshift Polyurethane Motor Mounts - 95A - BMW E36 E46 E9X

T#:1120843

Part#: PMM-R36

Ships on Sep 3, 2026

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

These mounts are designed for the BMW E36 and E46 including the M3, Z3, and Z4 as well as the E90/E92 M3. Excluding the E46 XI. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

OEM Hengst DCT Transmission Oil Pan - BMW GS7D36SG GS7D36BG DCT Trans...

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:27171955

Part#: 28108070791

In Stock

$ 115.99

This product was last offered at the strikethrough price on
06-10-2026

$ 96.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 115.99

This product was last offered at the strikethrough price on
06-10-2026

$ 96.99 USD

Limited Qty Sale

Add to Wish List

OEM quality replacement fluid pan for the GS7D36SG & GS7D36BG DCT transmissions Oil pans can take abuse from road debris, potholes, and other hazards, with lowered vehicles being even more susceptible to damage. Save yourself from costly transmission repair and replace your cracked or broken pan to prevent low fluid levels, often resulting to internal transmission damage. Requires the reuse of your original transmission oil pan bolts or 14 of BMW part # 28107842386

Show More Show Less

OE Getrag DCT Transmission Filter

T#:641899

Part#: 28107842840

Ships in 6 Business Days

$ 121.99

This product was last offered at the strikethrough price on
05-07-2026

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

OE Getrag Repair Kit For Pressure Filter - This item fits the following BMW Chassis: E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F80 M3,F82 M4,F83

BMW E9X M3/E6X M5/M6 Polyurethane Transmission Mounts

T#:1105943

Part#: PTM-E9XM395A

Back Ordered

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

BMW E9X M3/E6X M5/M6 Polyurethane Transmission Mounts offer superior performance for both street and track use with their 95A durometer rating. These mounts are engineered by Revshift to provide maximum durability and reliability.

High-Performance Material: Made from high-grade polyurethane in the U.S.A., ensuring longevity and resilience.
Durable Construction: CNC machined 6061-T6 billet aluminum flanged ends are embedded deep into the polyurethane to prevent separation under extreme loads.
Easy Installation: Features removable class 14.9 threaded studs with a hex wrench for simple and convenient installation.
Versatile Use: Ideal for street driving and track applications, combining performance with comfort.
Precision Engineering: Manufactured and tested in-house at Revshift’s Detroit facility, utilizing advanced machining technologies and quality control processes.

Revshift Performance Engineering is renowned for its commitment to quality and performance, making these transmission mounts a reliable choice for enhancing vehicle handling.

Show More Show Less

Revshift Polurethane Transmission Mount Set - 80A (Street - Black) - ...

T#:47885235

Part#: PTM-BT-80A

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

80A Street (Black) Bushings: Stiffer and stronger than OEM rubber. Minimal increase in NVH. Great choice as an upgrade over stock mounts (OEM+).

Revshift Polyurethane Rear Differential Bushing Set - Street - 80A Du...

T#:27405455

Part#: PDB-F8X-80A

In Stock

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Upgrade your vehicle's rear differential with the Revshift Polyurethane Rear Differential Bushing Set, delivering superior performance and stability. Engineered with precision and premium materials, this set is perfect for street applications, offering enhanced handling and reduced drivetrain movement without compromising on noise, vibration, or harshness levels. This kit is ideal for any enthusiast looking to improve vehicle dynamics without sacrificing overall comfort.

Key Features:

Easy Installation: Two-piece design enables straightforward installation using the included Revshift bushing lube, making upgrading hassle-free. Street Performance: Designed for street use, striking a balance between comfort and performance for everyday driving. Enhanced Stability: Minimize rear differential movement for improved stability and traction during acceleration, cornering, and braking. Durable Polyurethane Construction: Crafted from high-quality polyurethane, ensuring durability and long-lasting performance under daily driving conditions. Reduced Noise and Vibration: Soft and pliable 80A durometer construction significantly reduces NVH compared to higher-durometer or solid alternatives. Upgrade your vehicle's rear differential with the Revshift Polyurethane Rear Differential Bushing Set to experience a noticeable improvement in handling, stability, and overall driving dynamics. Elevate your street performance with confidence and precision.

Show More Show Less

Revshift Dual Mount Differential Bushing Kit - 80A (Street - Black) -...

T#:23449724

Part#: DBK-F8X-80ABL

Ships on Sep 4, 2026

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Revshift polyurethane differential bushings completely replace the OEM rubber bushings on the BMW F8X M4 / M3 / M2. This kit includes a second rear bushing and a dual mount bracket that adds a mounting point to the subframe. These bushings securely mount the differential, eliminating wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking everything in place. The bushings will not shift while driving, as other one-piece designs allow. The dual mount bracket was carefully designed for strength and a precise fit. This kit is entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined 6061-T6 billet aluminum.

Show More Show Less

OEM Getrag DCT Transmission Fluid Pump - GS7D36SG - E9X M3, F8X M3 M4...

T#:641901

Part#: 28107842838

Ships in 1 Business Day

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

Located in the transmission fluid pan - also called the sucking jet pump

OEM Getrag Transmission Shift Rod Seal - E34 540i, E39 540i M5, E46 M...

T#:641891

Part#: 23127501582

Ships in 1-2 days

$ 27.99

This product was last offered at the strikethrough price on
05-07-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Found above the output shaft on the rear side of the transmission

Revshift Dual Mount Differential Bushing Kit - 95A (Track - Green) - ...

T#:13957880

Part#: DBK-F8X

Ships in 6 Business Days

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Revshift polyurethane differential bushings completely replace the OEM rubber bushings on the BMW F8X M4 / M3 / M2. This kit includes a second rear bushing and a dual mount bracket that adds a mounting point to the subframe. These bushings securely mount the differential, eliminating wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking everything in place. The bushings will not shift while driving, as other one-piece designs allow. The dual mount bracket was carefully designed for strength and a precise fit. This kit is entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined 6061-T6 billet aluminum.

Show More Show Less

RevShift Differential Bushing Set - BMW E9X / E8X - 80A Street ...

For Non-M Models Only

T#:39363088

Part#: DBS-E9X80A-REV

Ships in 3 Business Days

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Differential Bushing Set - BMW E9X / E8X (Non-M) Enhance your driveline performance with this premium differential bushing set, designed specifically for E9X and E8X Non-M models. Factory rubber bushings degrade over time, leading to excessive drivetrain movement, clunking, and inefficient power transfer. These high-quality replacement bushings provide firm, reliable differential support, minimizing deflection for sharper throttle response and improved drivetrain stability. Whether you're replacing worn-out components or upgrading for spirited driving, this set delivers a more connected and controlled feel on the road. Precision-engineered for a direct OE-style fit, these bushings install seamlessly without modifications. Restore crisp, precise performance to your BMW today! ✅ Direct-fit replacement for aging factory bushings ✅ Reduces drivetrain flex and enhances power delivery ✅ Perfect for daily drivers and performance applications 📦 Includes: Full set of differential bushings for a complete refresh.

Show More Show Less

Revshift Polyurethane Differential Bushings - Street / Black (80A) - ...

T#:41728752

Part#: PDB-E46M-80A

Ships in 6 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Revshift polyurethane differential bushings completely replace the OEM rubber bushings on the E46 M3 and Z4M. These bushings stiffen the differential, improving the vehicle's handling capabilities and eliminating drive-line slop.

Show More Show Less

OEM Hengst Automatic Transmission Oil Pan & Filter - HG103H D834 - ZF...

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:27171954

Part#: 24118632189

In Stock

$ 155.99 USD

Add to Wish List

Qty

$ 155.99 USD

Add to Wish List

For vehicles equipped with an automatic ZF GA8P75HZ transmission. Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Service your BMW's transmission with this kit from Meyle to ensure your transmission keeps going strong for many more miles! Kit Includes: Automatic transmission oil pan with integrated filter Oil pan gasket Drain plug Pick from our selection of Automatic Transmission Fluids to pair with this kit for your next complete transmission service!

Show More Show Less

Revshift Polyurethane Differential Bushings - Track / Green (95A) - E...

T#:582011

Part#: PDBE46MGREEN

Ships in 2 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Revshift polyurethane differential bushings completely replace the OEM rubber bushings on the E46 M3 and Z4M. These bushings stiffen the differential, improving the vehicle's handling capabilities and eliminating drive-line slop.

Show More Show Less

E9X M3 Polyurethane Transmission Mounts 80A Black - Street

T#:46959255

Part#: 37791428772017

Ships in 5 Business Days

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

OEM Getrag Throwout Bearing Guide Tube - E46 M3

T#:641878

Part#: 23117512866

Ships in 1 Business Day

$ 76.96

This product was last offered at the strikethrough price on
05-29-2026

$ 54.98 USD

Add to Wish List

Qty

$ 54.98 USD

Add to Wish List

Located on the input shaft of your manual S6S420G transmission. We recommend replacing this tube every time you replace your clutch.

OEM Getrag Output Shaft Seal - GS6-53BG/DG - MINI R50 R52 R55 R56 R57...

T#:641649

Part#: 23117545082

In Stock

$ 58.00

This product was last offered at the strikethrough price on
05-07-2026

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

This seal located on both the right and left sides of the GS6-53BG/DG transmission outside of the bell housing, sealing both of the output shafts to the transmission.

OEM Hengst Automatic Transmission Filter - MINI

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:637135

Part#: 24347566358

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Automatic Transmission Oil Pan & Filter Kit

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! For GA8HP70, GA8HP76, GA8HP75, GA8HP51, GA8HP50, or GA8HP45Z automatic transmissions - Does not fit GA8P Hybri

T#:22064597

Part#: HG115H-D846

Back Ordered

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Transmission oil pan with integrated fluid filter. Found in all variants of GA8HP 8 speed automatic transmission. Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Show More Show Less

Shaft Seal

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591509

Part#: 11117568263

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Ideal for engine repairs or addressing leaks into the transmission bell housing, this shaft seal is designed to be mounted on the engine block's upper and lower halves, facing towards the transmission housing.

Show More Show Less

Revshift Solid Bolt-Through Motor Mounts - BMW E30 M20

T#:1105936

Part#: SMM-E30

Ships in 2 Business Days

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Solid bolt through 70D polyurethane motor mounts. Recommended for race use only. These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to their original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Polyurethane Differential Bushings - E30/Z3

T#:1105908

Part#: PDB-E3095A

Ships in 3 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Revshift Polyurethane Engine Mounts - 95A - E30 M20

T#:1105935

Part#: PMM-E30-95A

Ships in 4 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevent the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

MINI R53/R56 OS Giken Super Lock Racing Limited Slip Differential ...

T#:200230

Part#: MN024-HA

In Stock

$ 1,650.00 USD

Add to Wish List

Qty

$ 1,650.00 USD

Add to Wish List

If your MINI is only for competition use - autocross, time trial, or racing - this OS Giken LSD may be a better option than the standard 1.5-way unit. This race-spec LSD was developed over several seasons of competitive autocross. It uses a new high pressure ring for quicker response time and faster lockup. This makes it ideal for quick transitions and rapid on/off throttle motions typically encountered on the track. It's a one-way lockup so the car stays predictable under braking and gives the driver more feedback. For street use we prefer the normal 1.5-way setup because it's more progressive during lockup.

The biggest shortcoming of any MINI is not the lack of power - it's being able to put all of its useable power to the ground! The Cooper S is basically a one-wheel drive car and sending 200+ hp through that one tire does not live up to its full potential. A limited-slip differential is essential to any highly-tuned FWD car. The OS Giken Super-Lock is one of the most advanced clutch-type differentials on the market, and a favorite of autocrossers and road racers. The OS LSD for the MINI features ten clutch discs for a smooth and progressive lockup. By putting all of your available power to the ground you're at an instant advantage over the stock open-type differential. You'll be able to power through corners and on rough surfaces instead of uselessly spinning a wheel. Understeer is reduced by giving more bite to the tire that has the most traction. With an LSD in your MINI Cooper S you'll wonder why it wasn't first on your list to begin with (or why MINI/BMW left it out in the first place...).

The MNI OS Giken LSD uses a special 80W250 fluid that must be purchased separately.

This item fits the following BMWs:
2002-2006 R53 MINI MINI Cooper S (6MT manual transmission only)
2007-2013 R56 MINI MINI Cooper S (6MT manual transmission only)

Show More Show Less

Revshift Differential Studs And Spacers Kit - 12mm - BMW E30 ...

T#:1105928

Part#: DSS-12

Ships in 7 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

These studs and spacers mount the differential 12mm from the subframe. They are intended to be used with our 12mm offset subframe bushings. When raising the subframe, the spacers allow the differential to mount in the stock location which maintains proper pinion angle. The studs keep the spacers in place making for a quick and easy installation. The spacers are made from 6061 aluminum. The class 12.9 studs have hex key reliefs. We recommend using loctite during installation. Flange nuts are included. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Differential And LSD Tune

T#:34382136

Part#: BM237HAKT

Ships in 2 Business Days

$ 2,100.00 USD

Add to Wish List

Qty

$ 2,100.00 USD

Add to Wish List

Upgrade to a better performing LSD, includes tune.

Revshift Solid Bolt-Through Transmission Mount Kit - BMW E21 E30 E36 ...

T#:1105938

Part#: STM-BT

Ships in 7 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Solid bolt through 70D polyurethane trans mounts. Recommended for race use only. These trans mounts fit almost all BMW cars excluding the E30 M3 and a few older models. They commonly fit the E30, E36, E46, E9x, E8x, E21, E34, E39. Common BMW part numbers that these trans mounts replace are: 22316799331 23711175939 23711175424 23701141614 Revshift polyurethane transmission mounts are made in the U.S.A. from high-grade polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to its original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Revshift Polyurethane Engine Mounts - 95A - E30 24V Swap

T#:1105934

Part#: PMM-24V-95A

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

These mounts are designed for a 1983-1991 E30 BMW 3-series with a 24 valve M50/M52/S50/S52/S54 engine swap with an E21, 2002tii, or VW MK2 Golf brake booster. They use the OEM motor mount bolt holes on the E30 subframe. The mounts are angled with offset bolts to position the engine so that proper drivetrain alignment is maintained. They are used with E36 engine brackets. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Polyurethane Differential Bushings - E36

T#:1105907

Part#: PDB-E3695A

Ships on Sep 1, 2026

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

OE Getrag DCT Transmission Oil Pan - F8X F06/10/12/13

T#:641897

Part#: 28108070791

Ships in 1 Business Day

$ 272.99

This product was last offered at the strikethrough price on
05-07-2026

$ 232.99 USD

Add to Wish List

Qty

$ 232.99 USD

Add to Wish List

Replace your leaking or cracked DCT Transmission oil pan with an OE Getrag part to ensure proper fitment and a tight seal. Getrag Oil Pan - This item fits the following BMW Chassis: E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F80 M3,F82 M4,F83

Show More Show Less

E46 M3, E9X M3, E34 M5, E39 M5, Z4 M OS Giken Super Lock Limited Slip...

T#:1387

Part#: BM237-HA

Ships in 2 Business Days

$ 1,950.00 USD

Add to Wish List

Qty

$ 1,950.00 USD

Add to Wish List

The M Dynamic limited slip unit on the M3 is designed to be a pure street car differential. It's simply not up to the rigors of professional or amateur racing. The OS Giken Super Lock LSD is giant step up in from a stock M3 lsd unit. It's ready for the extreme conditions of racing, offers 100% progressive locking capability, and is able to do this while operating smoothly and quietly. It's use of advanced technologies that make it perfect for both street cars AND pro race cars... and everything in between. We're excited to be carrying the OS Giken LSD unit in our performance catalog, as we've been using them in our own Championship winning M3 race cars.

OS Giken incorporated revolutionary new ideas when developing the their own limited slip diff, utilizing their accumulated racing knowledge and experience and over 4 years of development. Their design uses an unprecedented number of friction plates (up to 28 total!) for better locking force, better engagement/disengagement, and less generated heat. The end result of their efforts is the OS Giken's OS Super Lock LSD which offers incredible durability and reliability on street and track driven BMWs. The use of highest quality materials, precise machining, forged gears and sound engineering makes this LSD durable and reliable enough for road racing performance (which we can personally vouch for!). This is such a great design, in that it can be used in any situation -- whether it's for a street car, or a 100% Professional race car. Zero break-in required. Super smooth and quiet engagement, and 100% progressive locking capability. Professional installation is recommended.

This Limited Slip Differential Unit fits the following BMWs:
2001-2006 E46 M3 coupe & convertible
2008-2013 E9X M3 coupe & convertible
1991-1995 E34 M5 sedan
1999-2003 E39 M5 sedan
2006-2008 E85 Z4M Z4 M Coupe, Z4 M Roadster

Show More Show Less

Polyurethane Differential Bushings - E46 Non-M

T#:1105905

Part#: PDB-E4695A

Special Order: No Guaranteed ETA

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Revshift Polyurethane Motor Mounts - 95A - E34 M30 S38, E39 M52 M54 ...

T#:1120845

Part#: PMM-R300

Ships in 2 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

These mounts are designed for the BMW E34 with an M30 or S38 engine and the BMW E39 with an M52 or M54 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

OS Giken E9X M3 Clutch Overhaul Kit (for Grand Am Legal Racing Flywhe...

T#:2209

Part#: BM533-BF6EA

Ships in 2 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

This kit includes parts needed to overhaul the OS Giken E90/E92 M3 Grand Am legal clutch kit, including clutch discs (2), center plates, and cover bolts (all). As used in the Grand Am KONI Challenge GS class V8 M3s, including both Turner Motorsport E92 M3 race cars.

Show More Show Less

OS Giken E9X M3 Clutch Alignment and Installation Tool

T#:2193

Part#: BM533-EB

Ships in 2 Business Days

$ 90.00 USD

Add to Wish List

Qty

$ 90.00 USD

Add to Wish List

This rugged tool simulates the input shaft of the 2008-2013 E9X M3 transmission, for easy installation of the OS Giken racing clutch kit. This tool is simply a must if you will be installing a clutch into the newer V8 model M3. This is a OS Giken part but can be used for other E9X M3 clutch kits where a more durable metal tool is called for.

Show More Show Less

Revshift Solid Bolt-Through Motor Mounts & Trans Mount Kit - BMW E30 ...

T#:1105937

Part#: SMK-E30

Ships in 4 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Solid bolt through 70D polyurethane motor and trans mounts. Recommended for race use only. These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to their original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

OEM Elring Automatic Transmission Filter Kit - E53 X3 M54 3.0L ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:361150

Part#: 24117557069

Ships in 1 Business Day

$ 54.89 USD

Add to Wish List

Qty

$ 54.89 USD

Add to Wish List

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

This item fits the following BMWs:
2000-2006 E53 BMW X3 M54 3.0L

Show More Show Less

OEM Getrag Transmission Drain/Fill Plug - M18x1.5x12mm

T#:51356006

Part#: 28107850241

Ships in 1 Business Day

$ 25.99

This product was last offered at the strikethrough price on
05-08-2026

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

E9X M3 OS Giken High Performance Racing Clutch & Flywheel Kit ...

T#:338592

Part#: BM533-BF6

Ships in 2 Business Days

Starting at $ 2,150.00 USD

Add to Wish List

Starting at $ 2,150.00 USD

Add to Wish List

This racing flywheel and clutch kit is made by renowned drivetrain specialist OS Giken. Complete fly wheel & clutch setup as used on our own TMS E92 M3 race cars. This setup is ideal for both endurance racing or high horsepower applications that have very limited street use but require more clamping power than stock. It has been approved for use in the GRAND AM Continential Challenge GS race class, approved by GRAND AM rules and regulations.

Includes flywheel, clutch discs (2 disc clutch), center plate, pressure plate, aluminum cover, 360 degree housing (for clutch assembly), cover bolts, flywheel bolts, throw-out bearing, and release sleave assembly. Weighs 5% less than the stock E90/E92 M3 flywheel and clutch setup. This setup is intended for racing use only (not for daily driven street cars.) We recommend using the OS Giken clutch alignment tool during installation (sold separately).

Show More Show Less

Revshift Polyurethane Rear Differential Bushing Set - Track - 95A Dur...

T#:27405531

Part#: PDB-F8X-95A

Ships in 7 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Upgrade your vehicle's rear differential with the Revshift Polyurethane Rear Differential Bushing Set, delivering superior performance and stability. Engineered with precision and premium materials, this set is perfect for track applications, offering enhanced handling and reduced drivetrain movement. This kit is ideal for any enthusiast looking to keep their drivetrain from moving during track use.

Key Features:

Easy Installation: Two-piece design enables straightforward installation using the included Revshift bushing lube, making upgrading hassle-free. Track Performance: Designed for race use with maximum stiffness polyurethane. Enhanced Stability: Minimize rear differential movement for improved stability and traction during acceleration, cornering, and braking. Durable Polyurethane Construction: Crafted from high-quality polyurethane, ensuring durability and long-lasting performance under daily driving conditions. Upgrade your vehicle's rear differential with the Revshift Polyurethane Rear Differential Bushing Set to experience a noticeable improvement in handling, stability, and overall driving dynamics. Elevate your racing performance with confidence and precision.

Show More Show Less

OE Getrag Shaft Seal

T#:641896

Part#: 28407842845

In Stock at Vendor

$ 71.99

This product was last offered at the strikethrough price on
05-07-2026

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Getrag Shaft Seal - 50X60X5,5 This item fits the following BMW Chassis: E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F80 M3,F82 M4,F83

Polyurethane Transmission Mounts - E30 M3

T#:1120841

Part#: PTM-E30M395A

Special Order: No Guaranteed ETA

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These mounts are the most durable and reliable mounts on the market. CNC machined 6061-T6 billet aluminum flanged ends are molded deep into the polyurethane which prevent the isolated ends from separating under extreme loads. The class 14.9 threaded studs are removable with a hex wrench for ease of installation.

Show More Show Less

Revshift Polyurethane Motor Mounts - 95A - BMW E30 M3

T#:582010

Part#: PMME30GREEN

Ships in 7 Business Days

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

These mounts are designed for a BMW E30 M3. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

OE Getrag Mechatronic Unit Cover Gasket

T#:641890

Part#: 28607842856

Ships in 5 Business Days

$ 67.99

This product was last offered at the strikethrough price on
05-07-2026

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

Seals the Mechatronic Unit Cover to the transmission This item fits the following BMW Chassis: E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F80 M3,F82 M4,F83

OEM Hengst Automatic Transmission Oil Pan & Filter - BMW GA6HP26Z Tra...

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:27171956

Part#: 24152333903

Ships in 8 Business Days

$ 117.99 USD

Add to Wish List

Qty

$ 117.99 USD

Add to Wish List

Transmission oil pan with integrated fluid filter (not available separately).

Automatic Transmission Oil Pan

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:22064605

Part#: HG112H-D843

Ships on Aug 28, 2026

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Service your BMW's transmission with this kit from Meyle to ensure your transmission keeps going strong for many more miles!

Show More Show Less