BMW Drivetrain Parts

The stock center support bearing carrier is engineered to minimize noise, vibration, and harshness (NVH) in the cabin by loosely securing the center bearing with a soft rubber bushing. However, this design allows the driveshaft to move off-center during launches and shifts, reducing throttle response and causing drivetrain oscillations. Over time, the rubber bushing can sag or dry rot, leading to misalignment of the driveshaft.

Prevent or fix this common problem with JXB Performance's Driveshaft Center Support Bearing Upgrade! This upgrade features a simple yet highly effective 2-piece design that makes installation and bushing replacement effortless. The stock carrier is cut away, and the JXB bushings securely "clamp" the driveshaft bearing in place, ensuring constant driveshaft alignment.

The Street bushing option from JXB is the most popular choice, offering a significant improvement over the stock design while keeping NVH levels minimal.

Note: Some light NVH, such as a soft hum, may occur at certain speeds. However, with a modified exhaust or open windows, it’s unlikely to be noticeable.

Installation is straightforward and doesn’t require removing the driveshaft. The 2-piece design clamps directly onto the OEM bearing, though removing the old carrier will require a cutting tool.

Need replacement or additional bushings? See T#4799658 for replacement street bushings.

E30 Direct Bolt-In Rear Axle. The Level 5 Direct Bolt-In Axle for the E30 feature a direct fit outer CV with ABS ring, heavy duty torsional axle bars made from high-grade aircraft quality material, and a larger than factory 6-bolt Porsche style 108mm Inner CV with a bolt-on flange and stub into the differential. These axles are complete and ready to install with no modifications necessary.
The Driveshaft Shop has been manufacturing heavy duty replacement driveshafts for street and track vehicles around the world for the last thirty years. Every single shaft is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. With materials such as Carbon Fiber, Aluminum, and Chromoly The Driveshaft Shop has a solution for you no matter what the application.

*Priced Per axle 

This part fits the following BMWs:
1985 - 1991 E30 M3 

The Vargas Turbo Technologies Carbon Fiber Driveshaft for the G87 M2 is a game-changer for BMW G87 M2 enthusiasts who demand top-tier performance and reliability. Engineered with precision and crafted from advanced carbon fiber, this driveshaft delivers a perfect balance of strength, lightweight construction, and improved drivability. Ideal for spirited street driving or aggressive track days, it sets a new standard in drivetrain performance.

Key Features and Benefits Lightweight carbon fiber reduces rotational mass for faster acceleration and improved handling Exceptional strength and durability to withstand high-torque applications Enhanced drivetrain efficiency with minimized power loss during transmission Precision-engineered for the BMW G87 M2 to ensure seamless installation Vibration-damping properties provide a smoother and quieter ride Available at Turner Motorsport, a trusted name in BMW performance upgrades The Vargas Turbo Technologies carbon fiber driveshaft is the ultimate upgrade for your BMW G87 M2, enhancing performance, efficiency, and driving enjoyment.

This is a 1-piece conversion for the BMW E36 platform. The shaft measures 2.75" x .170" tube with a 108mm CV to mount to the differential, which will eliminate any possible pinion angle issues. This shaft weighs 20lbs and since the center bearing is no longer used, it will make the car seem more athletic and give it a smoother power transfer. This shaft is now balanced on a 9500RPM balancer to ensure a perfectly balanced shaft. Comes complete with adapter plates to mount up to the transmission and differential flanges and all necessary hardware for installation.

Please Note: The E36 M3 uses either a 4-bolt or 6-bolt rear differential flange. This driveshaft is for the 4-bolt rear differential ONLY. If your vehicle has a 6-bolt rear flange, please see part# BMWSH2-CV-C. Please verify which differential flange your vehicle has before ordering necessary hardware for installation.  Custom built to order.  Build time is 6-8 weeks.

The Driveshaft Shop has been manufacturing heavy duty replacement driveshafts for street and track vehicles around the world for the last thirty years. Every single shaft is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. With materials such as Carbon Fiber, Aluminum, and Chromoly The Driveshaft Shop has a solution for you no matter what the application.

This part fits the following BMWs:
1995 - 1998 E36 M3

This is a 1-piece conversion for the BMW E36 platform. The shaft is made from 3" x .083" DOM tube with a 108mm CV to mount to the differential, which will eliminate any possible pinion angle issues. This shaft weighs 25lbs and since there is no hanger bearing, it will make the car seem more athletic and give it a smoother power transfer. We would have liked to offer an aluminum version, but for strength, it would have to be made in 3.5" diameter which is too large to fit without a clearance issue. We do offer a Carbon Fiber version also, part number BMWSH2-CV-C. This shaft is now being balanced on a new 9500RPM balancer to ensure a perfectly balanced shaft. Comes complete with adapter plates to mount up to the transmission and differential flanges and all necessary hardware for installation.  

Please Note: The E36 M3 uses either a 4-bolt or 6-bolt rear differential flange. This driveshaft is for the 6-bolt rear differential ONLY. If your vehicle has a 4-bolt rear flange, please see part# BMWSH1-S. Please verify which differential flange your vehicle has before ordering.

The Driveshaft Shop has been manufacturing heavy duty replacement driveshafts for street and track vehicles around the world for the last thirty years. Every single shaft is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. With materials such as Carbon Fiber, Aluminum, and Chromoly The Driveshaft Shop has a solution for you no matter what the application.

This part fits the following BMWs:
1995 - 1998 E36 M3

This is a 1-piece Chromoly conversion for the BMW E46 (6-Speed Manual Transmission ONLY, will not fit SMG).

The shaft is 3" x .083" DOM tube with billet aluminum plates to convert the small bolt pattern on the factory transmission to use larger 1310 U-Joint and a 108mm CV to mount to the differential, which will eliminate any possible pinion angle issues. This shaft weighs 25 pounds and since there is no hanger bearing, it will make the car seem more athletic and give it a smoother power transfer.
Unlike other aftermarket shafts for BMW's this shaft features a slider system that will let the shaft move in and out during racing and chassis flex. This shaft is now being balanced on a new 9500RPM balancer to ensure a perfectly balanced shaft. Comes complete with precision machined front and rear conversion plates and all necessary hardware for installation.
The Driveshaft Shop has been manufacturing heavy duty replacement driveshafts for street and track vehicles around the world for the last thirty years. Every single shaft is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. With materials such as Carbon Fiber, Aluminum, and Chromoly The Driveshaft Shop has a solution for you no matter what the application.

This part fits the following BMWs:
2001 - 2006 E46 M3