BMW Drivetrain Parts

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that last a lifetime.

This DCT service kit that takes the guesswork out of a fluid change . No need to track down the correct fluid and plugs, simply open the box, and get the job done the correct way. By servicing your DCT transmission, you will be assured that old, broken down fluid won't cause a several thousand dollar nightmare. We recommend this service every 40,000 miles to keep your transmission going strong for years to come.

Kit includes:

• 5 quarts of Pentosin DCTF-1 fluid
• DCT transmission cartridge and suction filters
• Drain and fill plugs

Please note: We include 5 quarts of DCT fluid because without a GT1 diagnostic tool and much more involved labor, you will not be able to replace over 5 quarts of fluid. Many elect to do this service and simply flush the fluid 5,000 miles later to ensure all fluid has been flushed, but this is not mandatory.

Both the cartridge and suction filters have their own challenges in replacing. For best results, replace both.

E30 M3 Front Hub Assembly w/bearing. This bearing requires that you use your existing ABS ring. This is a simple press fit. This is an OEM Wheel Bearing Hub Assemblies made by FAG. GSP and FAG are the leaders in wheel bearing technology. These wheel hubs are the best you can buy. Alternate part number 31212225362.

FAG is an OE supplier to BMW as well as several other German marques. 

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.

This hub uses the ABS ring from the E28 5-series. For the E30 M3 the original ABS ring will need to be removed and installed on the new hub.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder and Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

• OEM Lemforder Engine Mount (x2)
• Genuine BMW Transmission Mount (x2)
• New Installation Hardware

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response.

This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come.

Stock Flywheel Weight: 24-31 lbs.

JB Racing Lightweight Aluminum Flywheel: 12 lbs.

This item fits the following BMW Chassis:
E61/1, E82/88, E9x, Z4

Fits the follow engines:
N52 3.0L

Maintain peak performance and extend the life of your transmission with the Bremmen Parts DCT Transmission Filter. Engineered to block harmful contaminants, this premium filter protects vital components such as solenoids and fluid passages, ensuring smooth and reliable operation.

A clogged or worn transmission filter can restrict fluid flow, leading to delayed shifts, harsh gear engagements, or even severe transmission failure. Replacing the filter during routine fluid service or after major component replacements like the clutch pack, pump, or fluid pan is critical to preserving your transmission’s performance.

Choose Bremmen Parts for a durable, high-quality solution designed specifically for your BMW’s dual-clutch transmission.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes Redline D4 ATF, the transmission filter, gasket and bolts.

Kit Includes:

• Automatic transmission filter with associated hardware
• Oil pan gasket
• Drain plug with sealing washer
• Fill plug with sealing washer
• 6 quarts Redline D4 automatic transmission fluid

Fits the following BMWs:
E31 BMW 840Ci (from 09/1996)
E39 BMW 540i (from 01/1997)
E38 BMW 740i/iL (from 01/1997)
E53 BMW X5 M62