BMW Drivetrain Parts

BMW Clutch Stop

Improve your shifting experience with the BMW Clutch Stop. This adjustable clutch stop is designed to install beneath the clutch pedal, allowing you to set the precise stopping point just after the clutch disengages. Once adjusted, you can achieve consistent, smooth, and efficient shifts every time, saving valuable time and effort.

Benefits:

• Enhances shifting precision and consistency
• Saves time with smooth and fast shifts
• Adjustable design allows for personalized settings

Upgrade your BMW's shifting performance with the BMW Clutch Stop for a more enjoyable driving experience.

Turner Motorsport Dual Shear Selector Rod (DSSR)

Enhance your N54-equipped 135i or 335i’s driving feel with the Turner Motorsport DSSR. Designed to give your shifter a much more precise and solid connection, this DSSR replaces the OEM selector rod, eliminating the play and deflection that come from single-shear designs. Pair it with a Turner short-shift kit for the ultimate shifting upgrade.

Think of the DSSR as a major upgrade from the single-contact OEM rod, much like riding a bike with two hands instead of one: you have stronger, more precise control over each gear change. With its dual-contact setup, the DSSR “sandwiches” both sides of the shifter and transmission, creating a direct link that feels solid, eliminating the vague and sloppy feel of the factory setup.

Key Benefits:

Enhanced Precision: Significantly reduces deflection and play, giving you a more connected feel while shifting Compatible with Factory & Aftermarket Shifters: Perfect for custom setups as well as stock configurations Durable Build: Fabricated from high-quality 303 stainless steel, offering rust resistance and longevity Complete Hardware Included: Comes with zinc-plated hardware for a secure installation Specifications:

Material: 303 stainless steel construction Compatibility: Replacement for part #25117524722 (E8X/E9X N54 models) Installation Design: Two-piece assembly with captive pins, designed for simple alignment and adjustability Fitment: Specially engineered to fit the tight N54 carrier without interference Installation Tips:

Remove your factory selector rod and take note of its orientation. Attach the DSSR to both the transmission selector joint and lower shift lever. Shift to 3rd or 5th gear for maximum access to the supplied hardware, then secure tightly.

Turner Motorsport Polyurethane Shifter Arm Bushing

Want more responsive and accurate shifts without sacrificing comfort? The Turner Motorsport Polyurethane Shifter Arm Bushing is the perfect enhancement to reduce unwanted movement and play in the shift arm assembly. Factory rubber bushings absorb vibrations for smoothness but compromise direct feedback and often wear out, leading to sloppy, imprecise shifting.

Crafted from high-performance polyurethane with a corrosion-resistant 304 stainless steel sleeve, this bushing maintains stability without stretching or wearing out like rubber. Experience the tactile feel of more precise shifts, with minimal NVH (Noise, Vibration, and Harshness) added to your drive. A must-have for any driver looking to take control of their BMW's performance.

Key Features:

Precision Control: Firmer than factory rubber for a crisp, responsive shifter feel Long-Lasting Materials: Made with durable 70a polyurethane and a 304 stainless steel mounting sleeve Easy Installation: Direct replacement—no modifications needed OEM Compatibility: Replaces BMW part numbers 25111222015 and 25111222652 Specifications:

Material: High-quality 70a polyurethane and 304 stainless steel Made in the USA: Proudly manufactured with quality materials Durability: Improved lifespan over factory rubber bushings, reducing slop and enhancing gear engagement

Revitalize your BMW driving experience with the Turner Motorsport Double Adjustable Short Shift Kit. BMWs have suffered from long throw shifters, but Turner Motorsport has the perfect remedy. This kit offers double adjustability, allowing users to fine-tune height and throw, rediscovering the joy of driving.

Worried about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option, allowing easy switching between long and short levers. Whether your car is built for the track, weekend adventures, or daily commuting, Turner's short shifter kit is the ideal solution.

Installation is a breeze compared to competitors, thanks to the custom bearing cup, enabling easy inside-car installation (for applications using the stock shifter arm).

Key Benefits:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation Features:

• Bearing cup assembly for easy inside-vehicle installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability Features:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• Independently adjustable shifter throw

Design Features:

• CNC machined lower shifter assembly from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• 10mm adjustment range in the lower shift arm
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability and corrosion resistance
• Rally Upper Shift Lever machine grooved for OEM boot compatibility
• Black delrin knob with standard ⅜-16 thread
• Compatible with OE BMW shift knobs or aftermarket shift knobs

Turner Motorsport's commitment to perfection is evident in the development of the short shifter, in association with Rennline. The result is a robust, durable, and aesthetically pleasing Dual Shear Selector Rod (DSSR), ensuring a more precise shift by reducing flexibility in the selector rod.

Turner Weighted Shift Knob - 6 Speed:

Prepare for an elevated driving experience with the Turner Weighted Shift Knob. This 6-speed coin-designed knob not only feels fantastic but also enhances shifting with added weight, resulting in faster engagement. Crafted from billet 6061-T6 aluminum, CNC machined for precision, and anodized for durability, it's the perfect complement to Turner's short shift kits.

Revamp your BMW's shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit, a solution to the historically long throw shifters. Turner's short shifters offer height and throw adjustability, allowing drivers to discover their ideal driving sweet spot.

Curious about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option, simplifying the transition between long and short levers. Whether for track, weekend adventures, or daily commuting, Turner's short shifter kit caters to diverse driving needs.

Installing this kit is a breeze compared to competitors, thanks to the custom bearing cup that enables easy installation from inside the car. Enjoy the benefits of adjustable throw, ultra-crisp shifter feel, and an engaging driving experience.

Key Features:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, precise shifts
• Easy installation with custom bearing cup
• Quick Change option for rally lever extension
• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• CNC machined for durability and corrosion resistance

Upgrade further with the Turner Weighted Shift Knob - a 6-speed coin-designed knob that enhances the shifting experience with added weight, resulting in faster engagement and overall improved shifting.

Turner Weighted Shift Knob Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• Weighs 340g (11.99oz) for enhanced shift feel
• Anodized billet shift boot collar with Turner logo

For a comprehensive shifter makeover, pair the knob with Turner's short shift kits. The knob, carefully crafted from billet 6061-T6 aluminum, is CNC machined for precision fit and finish, anodized for durability, and designed for seamless compatibility with OE BMW shift knobs.

Turner Motorsport presents the Double Adjustable Short Shift Kit, providing a solution to BMW's historically long throw shifters. Experience the thrill of driving again with Turner's height and throw adjustable short shifters, offering double adjustability for a personalized driving experience.

Wondering about the long shifter? Turner's rally lever extension, available separately, facilitates a Quick Change option, making the transition between long and short levers effortless. Whether you're a track enthusiast, weekend warrior, or daily driver, Turner's short shifter kit is tailored to suit your needs.

Installation is a breeze with the custom bearing cup, allowing easy installation from inside the vehicle. Enjoy the benefits of adjustable throw, ultra-crisp shifter feel, and a more engaging driving experience.

Key Features:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, precise shifts
• Easy installation with custom bearing cup
• Quick Change option for rally lever extension
• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• CNC machined for durability and corrosion resistance

Upgrade your driving experience with Turner's Weighted Shift Knob. This 6-speed coin-designed knob enhances shifting with added weight, resulting in faster engagement and an overall improved shifting experience.

Turner Weighted Shift Knob Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• Weighs 340g (11.99oz) for enhanced shift feel
• Anodized billet shift boot collar with Turner logo

Pair these upgrades with Turner's in-house engineered DSSR for E46 330i/Ci 6-Speed models. Developed in collaboration with Rennline, Turner's Dual Shear Selector Rod reduces flexibility for a more precise shift, eliminating slop in the stock shifter.

Turner DSSR Features & Benefits:

• Reduces play in the shifter for a more positive feel
• Manufactured from 303 stainless steel for corrosion resistance
• Compatible with stock or Turner shifters
• Necessary hardware included for easy installation

Revitalize your BMW's shifting performance with Turner Motorsport, where precision meets driving pleasure.

Revolutionize your BMW's shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit. Tired of the factory's long throw shifters? Turner's solution offers height and throw adjustability, allowing drivers to rediscover the joy of driving their cars.

Ever wondered about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option. The lower part of the short shifter is keyed, facilitating seamless transitions between long and short levers. Whether you're a track enthusiast, weekend warrior, or daily driver, Turner's short shifter kit caters to your needs.

Key Benefits:

• Adjustable between conservative short throw to ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation:

• Bearing cup assembly for easy installation inside the vehicle
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw and feel

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for durability and corrosion resistance
• Rally Upper Shift Lever machine grooved for OEM boot compatibility
• Both shift levers offer 22mm of independent height adjustability

Turner Weighted Shift Knob - 6 Speed:

Get ready for an improved shifting experience with the Turner Weighted Shift Knob. Crafted from billet 6061-T6 aluminum and featuring Delrin outer construction, this knob adds weight for faster engagement and an overall enhanced driving feel.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• Weight: 340g (11.99oz)
• 5 Speed Coin design
• Anodized billet shift boot collar with Turner logo engraved

Upgrade your BMW's shifting experience with Turner's precision-engineered short shift kit and weighted shift knob for a complete shifter transformation.

Turner Motorsport Differential Brace for F-Chassis N55/B58

Unleash the full potential of your N55/B58 engine with the Turner Motorsport Differential Brace, crafted to deliver stability and minimize deflection. Designed to withstand high-performance demands, this brace minimizes unwanted differential movement and provides a more immediate, responsive power transfer to the wheels, even at extreme torque levels.

Key Benefits:

Enhanced Driving Stability: Improved traction, reduced wheel hop, and an overall tighter rear-end feel. Durability: Reduces stress on factory rubber bushings, extending their life and protecting the differential bearing. Precision Fitment: Constructed from 6061-T6 aluminum with a Turner Blue anodized finish, engineered using FARO laser scanning and CAD technology. High-Grade Hardware: Equipped with corrosion-resistant Yellow Zinc-Chromate coated 10.9 fasteners, this brace is built for lasting strength. Installation Note:

Installation requires precision drilling (10mm and 15mm carbide bits) for a secure fit.

95A Polyurethane Differential Bushings

These high-performance polyurethane differential bushings from ECS Tuning deliver durability and an optimal balance of comfort and control. Designed to reduce differential deflection and improve throttle response, the 95A durometer polyurethane bushings bring track-level stability to your daily drive, without the noise or harshness of solid mounts.

Sturdy & Resistant: Made from tough 95A durometer polyurethane with anodized 6061-T6 aluminum sleeves, they resist chemicals, salt, and wear. Enhanced Handling & Control: Reduce wheel hop and improve throttle response, giving you better control in high-stress scenarios, from spirited driving to daily commuting. Engineered for Strength: Designed to handle extreme driveline forces, ECS Tuning’s bushings optimize power transfer while maintaining smooth performance. What's Included:

Turner Blue Anodized Rear Differential Brace Precision drill guides and complete hardware Polyurethane Differential Bushings for a superior driving experience

Transform your BMW driving experience with the Turner Motorsport Double Adjustable Short Shift Kit. Bid farewell to the historically long factory shifters that plagued BMWs, as Turner's solution provides height and throw adjustability for a driving thrill.

Curious about the long shifter? Turner's rally lever extension, available separately, offers a Quick Change option, making transitions between long and short levers effortless. Ideal for track enthusiasts, weekend warriors, or daily drivers, Turner's short shifter kit is versatile.

Key Benefits:

• Adjustable between conservative short throw to ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation:

• Bearing cup assembly for easy in-car installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw and feel

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability and corrosion resistance
• Rally Upper Shift Lever machine grooved for OEM boot compatibility
• Both shift levers offer 22mm of independent height adjustability

Upgrade your driving pleasure further with the Turner Weighted Shift Knob - 5 Speed. Crafted for enthusiasts, this knob enhances the shifting experience, adding weight for faster engagement.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• Weight: 340g (11.99oz)
• 5 Speed Coin design
• Anodized billet shift boot collar with Turner logo engraved

Pair it seamlessly with Turner's short shift kits for a complete shifter makeover, elevating your BMW's performance.

Turner Motorsport Doorbuster Kit: Double Adjustable Short Shifter Kit & 389mm DSSR for BMW Z3

Upgrade your BMW Z3’s shifting dynamics with this Turner Motorsport Enthusiast Bundle, which includes the Double Adjustable Short Shifter Kit and 389mm Dual Shear Selector Rod (DSSR). Enjoy enhanced control, adjustable throw, and a precise, connected feel—perfect for anyone looking to take their Z3’s performance to the next level.

TURNER DOUBLE ADJUSTABLE SHORT SHIFTER KIT

BMW’s factory shifters are often known for their long throw, but Turner Motorsport has crafted a solution that redefines the experience. This Double Adjustable Short Shifter offers customizable throw reduction—up to 52%—along with height adjustability, allowing you to dial in the exact feel you want.

A standout feature is the Quick Change rally lever extension. This lets you effortlessly swap between a taller lever, ideal for spirited driving or track days, and a shorter one, for daily use.

Benefits:

Adjustable Throw: From a slight reduction to an ultra-short throw. Crisp Shifts: More precise, quicker shifts for a connected driving experience. Easy Installation: Bearing cup assembly for installation from inside the cabin. Rally Style Option: Switch easily to a taller lever for track-focused driving. Installation and Adjustability:

Height Adjustability: 22mm range for knob height fine-tuning. Throw Adjustability: Independently adjustable throw using a set screw on the shifter ball—no need to remove the shifter. Total Adjustment Range: Up to 52% throw reduction compared to the stock E36 shifter. Design Features:

Materials: CNC-machined 4140 chromoly steel, 304 stainless steel shifter ball, Nylatron® NSM bushings. Anodized Aluminum: 6061-T6 aluminum levers and bearing cup, ensuring durability and corrosion resistance. Knob Compatibility: Compatible with OE BMW and most aftermarket knobs, with a Quick Change rally lever featuring a black Delrin knob. TURNER 389MM DSSR FOR Z3

Turner Motorsport’s 389mm DSSR is designed to provide a superior shifting experience over the factory selector rod. This Dual Shear Selector Rod (DSSR) is crafted for the Z3 6-cylinder models (replacing part #25111222780), offering better control and eliminating unwanted play.

The DSSR works by “sandwiching” the shifter’s connection points, stabilizing the entire mechanism and enhancing the direct feel of each shift. Pair it with Turner’s poly rear shifter bushing for an even more refined experience.

Benefits:

Enhanced Shift Feel: Reduces deflection and play, resulting in more precise shifts. Compatible with Factory and Turner Shifters: Matches the 389mm length for factory knob positioning. Corrosion Resistance: Made from 303 stainless steel for longevity and durability. Design Features:

Driver-Centered Lean: Maintains a 5-degree lean toward the driver for natural ergonomics. Laser-Etched Branding: Includes Turner Motorsport’s logo for a premium, authentic look. Why Choose the Turner Motorsport Short Shifter Kit and DSSR?

With this kit, you’re not only getting a fully adjustable short shifter to make your driving more responsive and engaging, but also a high-quality DSSR for reinforced stability. This combo is perfect for drivers who demand precision, control, and an elevated connection with their Z3’s transmission.

Revolutionize your shifting experience—Turner Motorsport has you covered with engineering, performance, and durability.

Upgrade your BMW shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit. Say goodbye to long factory throws and hello to a double-adjustable short shifter that brings excitement back to your driving. Turner's innovation allows you to fine-tune both height and throw, providing a customizable and engaging driving experience. Whether you're a track enthusiast, a weekend warrior, or a daily driver, Turner's short shifter kit caters to your needs.

Benefits:

• Adjustable between a conservative short throw to an ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• More engaging driving experience

Installation:

• Bearing cup assembly for easy installation from inside the vehicle
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range to fine-tune shifter throw and feel
• Independently adjustable shifter throw
• Adjustments can be done in the car without removing the shifter

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• Lower shift arm with a 10mm adjustment range
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Rally Upper Shift Lever machine grooved for OEM boot compatibility

Turner Weighted Shift Knob - 6 Speed

The Turner Weighted Shift Knob adds an extra dimension to your driving experience. With a fantastic feel and increased weight for faster engagement, this shift knob is designed to make you want to hit the road. Crafted from billet 6061-T6 aluminum with a durable anodized finish, this knob boasts precision and durability. The weighted design, at 340g, smoothens shifts for faster engagement, providing an improved overall shifting experience.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• 340g (11.99oz) for enhanced shift smoothness
• 6 Speed Coin design
• Anodized billet shift boot collar with Turner logo engraved

Turner Motorsport DSSR - E39 540i/M5 (273mm)

Take your BMW E39 540i/M5 shifting to the next level with the Turner Motorsport DSSR. Developed in collaboration with Rennline, this Dual Shear Selector Rod (DSSR) eliminates slop in the stock shifter, providing a more precise and accurate shift. Compatible with stock or Turner shifters, the DSSR is machined from 303 stainless steel for superior corrosion resistance.

Features & Benefits:

• Provides a more positive feel by reducing play in the linkage
• Minimizes deflection for a crisp shift
• Manufactured from 303 stainless steel
• Replacement for 25111222717 (E39 540i or M5 models)
• Works with stock or Turner shifters
• Necessary hardware included

E36 188mm Reinforced Billet Aluminum Differential Cover

Engineered from high-quality 6061 billet aluminum, this differential cover is built for resilience and designed for performance. Hard-coat anodized for a sleek finish and superior corrosion resistance, it not only looks great but also brings functional improvements in strength and cooling. Turner Motorsport has added reinforced mounting ears to withstand the toughest driving conditions—preventing the breakages common with OEM covers.

This cover doesn’t just endure—it performs. The cover features strategically placed external fins on the rear face, base, and mounting ears to efficiently dissipate heat, keeping temperatures stable for optimal fluid longevity and differential health. Inside, the design promotes consistent oiling of the ring gear, reducing wear by ensuring critical cooling and lubrication. An integrated baffle keeps pressure stable and minimizes cavitation.

Compatibility is at the core of the design: it’s compatible with OEM gaskets or RTV, and it retains the factory bushing geometry for easy integration with rubber, poly, and even solid mounts. The upgraded -6AN drain and fill plugs allow expansion for an external oil cooler, ideal for high-performance applications. Plus, a 1/8 NPT port allows for real-time monitoring of differential fluid temperatures.

Key Benefits:

Reinforced mounting ears for robust support—no more broken ears during aggressive driving or track days Optimized cooling with fins on rear face, base, and mounting ears Removable air duct to direct airflow across fins for maximum temperature control Improved internal design to maintain consistent lubrication on the ring gear -6AN ports for external cooler compatibility, increasing fluid capacity and extending change intervals 1/8 NPT port for temperature sensor integration to monitor fluid heat Design Highlights:

Precision-milled from 6061 billet aluminum with a T6 hard-coat anodized finish Fits E36 medium case 188mm differentials Compatible with differential coolers (-6AN) and temperature sensors (1/8 NPT) Works with OEM speed sensor, OEM gasket, and oversized sway bars Designed for easy maintenance with a removable air duct and accessible drain/fill plug ECS Tuning E36 Polyurethane Transmission Mount Set – Street

The ECS Polyurethane Transmission Mounts in this kit provide a solid connection between transmission and chassis, enhancing stability and reducing unwanted drivetrain movement. Built for durability, these mounts feature polyurethane with a 70A durometer for a perfect balance of comfort and performance. Compared to OEM rubber mounts, polyurethane provides less deflection, better power transfer, and much longer life under stress.

Polyurethane’s natural resistance to water, oil, and wear ensures these mounts maintain shape and performance even under heavy compression, making them ideal for spirited driving and track use. The mounts include a mechanical interlock for secure, reliable performance—even under high-torque, forced-induction scenarios. For those seeking a more aggressive setup, ECS also offers an 80A durometer Race mount.

Key Features:

Reduces transmission movement, minimizing mis-shifts and over-revs High-quality polyurethane bonded to 304 Stainless Steel Engaging driving experience with enhanced feedback and control Available in Street (70A) and Race (80A) applications for tailored performance Enjoy smoother shifts, firmer power delivery, and a more engaging drive with the ECS Polyurethane Transmission Mounts.