BMW Drivetrain Parts

OEM FAG Front Wheel Hub Assembly with Bearing fits BMW E36 (including M3), E46 (not Xi, not M), Z3 incl MZ3. It is interchangable with part #31221468926 or 31221139345.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
3/1991-1995 E34 BMW 525i 530i 535i 540i
11/1991-1994 E32 BMW 735i 735il 740o 740il 750il
3/1992-1999 E31 BMW 840ci 850ci 850csi
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Maintain peak performance and extend the life of your transmission with the Bremmen Parts DCT Transmission Filter. Engineered to block harmful contaminants, this premium filter protects vital components such as solenoids and fluid passages, ensuring smooth and reliable operation.

A clogged or worn transmission filter can restrict fluid flow, leading to delayed shifts, harsh gear engagements, or even severe transmission failure. Replacing the filter during routine fluid service or after major component replacements like the clutch pack, pump, or fluid pan is critical to preserving your transmission’s performance.

Choose Bremmen Parts for a durable, high-quality solution designed specifically for your BMW’s dual-clutch transmission.

Rein Transfer Case Fluid TF 0870 is designed to service your BMW xDrive transfer case, ensuring optimal performance and reliability. This genuine BMW fluid is essential for maintaining the efficiency of your transfer case, especially if you are nearing or exceeding the 60,000-mile mark. Using Rein Transfer Case Fluid TF 0870 helps to catch up on crucial maintenance and keep your vehicle running smoothly.

• Genuine BMW Fluid: Ensures compatibility and peak performance for BMW xDrive transfer cases.
• Optimal Performance: Helps maintain the efficiency of the transfer case, enhancing overall vehicle reliability.
• Preventive Maintenance: Ideal for vehicles approaching or exceeding 60,000 miles to ensure continued smooth operation.
• High-Quality Formulation: Designed to meet BMW's specifications for superior protection and longevity.

E46 M3, Z4 M Front Wheel Hub Assembly with Bearing. This is an OEM Wheel Bearing Hub Assembly made by FAG and meets all of the OE specifications for fitment and life. FAG is an OE supplier to BMW as well as several other German marques. (SKF does not have a front bearing assembly for the E46 M3).

When wheel bearing begin to fail you normally will here a squeaking or grinding noise or sometimes feel a slight amount of vibration in the steering wheel. Be sure to replace these asap to prevent possible damage to the hub or steering issues.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

The drive shaft support bearing is essential for stabilizing the drive shaft and ensuring smooth, efficient power delivery. Over time, the rubber mount surrounding the bearing can degrade, leading to excessive drive shaft movement and noticeable vibrations.

If you notice a thudding or clunking noise during acceleration, especially coming from beneath the center console, a failed center support bearing is likely the cause. Bremmen Parts provides a reliable and affordable replacement solution, designed to restore your BMW’s performance and driving comfort.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

Also included is the BMW fan favorite OE ZHP shift knob that will add a sportier look to your shifter.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.